Table of Contents
Advertisement
Note
If you turned on network server mode when you ran the
SETUP program, you need to use a different procedure to
enter your password. See "Using Your Computer as a
Network Server" on page 1-26.
Changing a Password
To change your password, follow these steps:
1. If you do not have a hard disk, insert your system diskette
in drive A.
2. Turn on or reset the computer. At the key prompt, enter
your current password followed by a forward slash (/) and
the new one you want to use. For example, if your current
password is 123 and you want to change it to ABC, type:
The screen does not display what you type.
Do not use characters requiring the [srml key, such as %, @,
or #, in your new password. The computer does not
distinguish between characters that are produced with the
Be sure to remember the new password you enter, or
3. Press [Mw). A happy face character appears and then the
computer loads the operating system.
1-24
Using Your Computer
Advertisement
Table of Contents
