Table of Contents
Advertisement
Running Tests
Follow these steps to run a test from the Execute menu:
1. Press
menu, such as the
System Board
Numeric Coproceseor
System Memory
Diskette Drive A
Hard Disk Drive #1
Serial Port COM1
Printer Port LPT1
Video Adapter Test
Keyboard Test
Press [tl or m to highlight the device you want to test
2.
and
press
How often to repeat test? 1
If you want to run the test once, press [Mwl. To run the test
3.
more than once, type the number of times and press [EncI1.
If there is only one test for a device, the program begins
4.
testing immediately. If there is more than one test for the
device, you see a submenu, such as the following:
HARD DISK Drive(S) AND CONTROLLER CHECK.
1 - Seek check
2 - Write, read check
3 - Read, verify check
4 - Run all above checks
0 - Exit
following:
Running System Diagnostics
the
Execute
4-5
Advertisement
Table of Contents
