Table of Contents
Advertisement
6. Turn the computer around again so that the front panel is
facing you.
7. Grasp the sides of the cover and pull it straight toward you
until it stops, just before it reaches the front of the
computer. Then lift it off at an angle as shown below.
8. Set the cover aside.
9. Ground yourself to the computer by touching the metal
surface of the back panel.
WARNING
Be sure to ground yourself by touching the back panel of the
computer every time you remove the cover. If you are not
properly grounded, you could generate an electric shock
when you touch a component.
Installing and Removing Options
2-5
Advertisement
Table of Contents
