Complete Installation - Maytag MDG17CSBGW Installation Instructions Manual

1. Check the electrical requirements. Be sure that you have
the correct electrical supply and the recommended
earthing method. See "Electrical Requirements."
2. Check that all parts are now installed. If there is an extra
part, go back through the steps.
3. Check that you have all of your tools.
4. Dispose of/recycle all packaging materials.
WARNING
Electric Shock Hazard
This dryer must be earthed.
Securely tighten all electrical connections.
Failure to do so can result in death, fire, or
electric shock.
5. Plug into an earthed outlet, or connect power.

COMPLETE INSTALLATION

6. Check dryer operation (some accumulated time may be on
the timer due to factory testing). Insert coins in slide and
press slide in slowly. (Operating time will accumulate per
number of coins and type of timing cam used.) Push START
button. Using a full heat cycle (not the air cycle), let the
dryer run for at least five minutes. Dryer will stop when
time is used up.
NOTE: Dryer door must be closed for dryer to operate.
When door is open, dryer stops, but timer continues to
run. To restart dryer, close door and push START button.
7. If the burner does not ignite and you can feel no heat
inside the dryer, shut off dryer for five minutes. Check that
all supply valve controls are in "ON" position and that the
electrical cord is plugged in. Repeat five-minute test.
17