Push Button Installation - Kohler FAMILY CARE S-TRAP K-23191T-NS Installation Instructions Manual

PUSH BUTTON INSTALLATION

NOTE: Remove the package and screw out the nut. Make the
button through the tank cover as shown. Be noted that the
button shall be kept level. Arrange big and small flush buttons
according to the label of water consumption on the tank.
Tighten the nut from beneath the tank cover.
TANK COVER INSTALLATION
Note: Press down the spring and insert the button into the
installation position on the tank cover. Release the spring to
lock it. Be noted not to let the steel wire of the flush valve
resting on the lever of the fill valve.
REMOVE THE TANK COVER
Note: Press down the spring to remove the box and separate
it from the tank cover.
1402301-T01-B
Fig.#22
22
Button Box
Fig.#23
23
Press down the spring
Fig.#24
24
-8-
Spring