Advertisement
3. Toilet bowl cleaner replacement.
Rotate the handle in the
direction of the arrow.
Turn off
4. Caution:
·
The toilet bowl cleaner is corrosive and is fatal if
swallowed.
·
Wear plastic gloves when using the toilet bowl cleaner.
·
Store the toilet bowl cleaner out of reach of children.
·
Flush eyes, skin or clothes for 15 minutes immediately
upon contact with the toilet bowl cleaner.
·
If Swallowed: Call poison control center or doctor
immediately for treatment advice. Have person sip a glass
of water if able to swallow. Do not induce vomiting unless
told to do so by a poison control center or doctor.
·
Keep away from heat or flame.
·
Refill the toilet bowl cleaner immediately after it is
completely dissolved to guarantee the effect.
Use the free toilet bowl cleaner inside, or replace with similar
products less than the size of 70(H)*70(W)*25(H)mm.
PUSH BUTTON INSTALLATION
NOTE: Remove the package and screw out the nut. Make the
button through the tank cover as shown. Be noted that the
button shall be kept level. Arrange big and small flush buttons
according to the label of water consumption on the tank.
Tighten the nut from beneath the tank cover.
1392769-T01-C
Lift the tank cover and move it aside as illustrated.
Note:
the steel wire connecting it with the flush valve.
Refer to the instructions on Fig.#23 for removal of tank cover.
Lift the cover
upward.
Fig.#20
20
Fig.#21
21
-7-
3.
The tank cover can not be completely removed because of
23
Unpack the toilet
bowl cleaner and
place it into the
container.
Turn on
4.
·
·
·
·
15
·
·
·
( )*25( )mm
Close the container
and recheck the
connection of the
water supply pipe.
70(
)*70
Advertisement
