Table of Contents
Advertisement
12
SERVICE WORK ON THE CHASSIS
12.43
Checking the rubber grip
12.44
Additionally securing the rubber grip
12.45
Adjusting the basic position of the clutch lever
–
Check the rubber grips on the handlebar for damage, wear, and looseness.
»
If a rubber grip is damaged, worn, or loose:
–
Change and secure the rubber grip.
Rubber grip adhesive (00062030051) (
401197-01
Preparatory work
–
Check the rubber grip. (
Main work
–
Secure the rubber grip at two points using the securing wire.
Securing wire (54812016000)
Wire twister forceps (U6907854)
The twisted wire ends face away from the hands and are bent toward the rubber
grip.
401198-01
(All TE 125)
–
Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screw
L01701-10
(All TE 250/300)
–
Adjust the basic setting of the clutch lever to your hand size by turning adjusting
screw
M00402-10
p. 63)
.
Info
Turn the adjusting screw counterclockwise to increase the distance
between the clutch lever and the handlebar.
Turn the adjusting screw clockwise to decrease the distance between the
clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
.
Info
Turn the adjusting screw counterclockwise to decrease the distance
between the clutch lever and the handlebar.
Turn the adjusting screw clockwise to increase the distance between the
clutch lever and the handlebar.
The range of adjustment is limited.
Turn the adjusting screw by hand only, and do not apply any force.
Do not make any adjustments while riding!
p. 123)
63
Advertisement
Table of Contents
