Safety; General Safety - Toro Z Master Professional 500 Series Operator's Manual

Servicing the Cutting Blades ............................. 60
Removing the Mower Deck............................... 61
Replacing the Grass Deflector .......................... 62
Cleaning .............................................................. 63
Cleaning under the Mower Deck ....................... 63
Disposing of Waste........................................... 63
Storage ................................................................... 64
Storage Safety.................................................. 64
Cleaning and Storage ....................................... 64
Troubleshooting ...................................................... 65
Schematics ............................................................. 67

Safety

This machine has been designed in accordance with
ANSI B71.4-2012.

General Safety

This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.
Using this product for purposes other than its intended
use could prove dangerous to you and bystanders.
•
Always keep the roll bar in the fully raised and
locked position and use the seat belt.
•
Do not operate the machine near drop-offs,
ditches, embankments, water, or other hazards, or
on slopes greater than 15 degrees.
•
Read and understand the contents of this
Operator's Manual before starting the engine.
•
Do not put your hands or feet near moving
components of the machine.
•
Do not operate the machine without all guards
and other safety protective devices in place and
working on the machine.
•
Keep children and bystanders out of the operating
area. Never allow children to operate the machine.
•
Stop the machine, shut off the engine, and remove
the key before servicing, fueling, or unclogging
the machine.
Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay
attention to the safety-alert symbol, which means
Caution, Warning, or Danger-personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.
You can find additional safety information where
needed throughout this manual.
4