Operating the Mower
Blade-Control Switch (PTO)
The blade-control switch (PTO) starts and stops the
mower blades and any powered attachments.
Engaging the Blade-Control
Switch (PTO)
Note:
Engaging the blade-control switch (PTO) with
the throttle position at half or less causes excessive
wear to the drive belts.
Figure 17
Disengaging the Blade-Control
Switch (PTO)
Figure 18
Operating the Throttle
You can move the throttle control between F
S
positions
(Figure
LOW
Always use the F
position when engaging the PTO.
AST
Figure 19
AST
19).
Operating the Choke
Use the choke to start a cold engine.
1.
Pull up the choke knob to engage the choke
before using the key switch
2.
Push down the choke knob to disengage the
choke after the engine has started
g008945
1. O
position
N
g009174
and
g008946
21
(Figure
20).
(Figure
Figure 20
2. O
position
FF
20).
g008959