Optional Service; Adjusting The Color Contrast - Samsung CLX-8540NX User Manual

Optional Service

When you want to add the optional features for this machine, you have to
install the optional kit and then set the machine to enable and activate
those features. Follow the next steps to enable those features.
Press Machine Setup on the control panel.
1
Press Admin Setting. When the login message pops up, then enter
2
password and press OK.
Press the Setup tab > Optional Service.
3
Option
Enables or disables the Copy menu from the
Copy
main screen.
After installing the fax kit, select this option
Analog Fax
Enable to use this machine as a fax machine.
Enables or disables the Scan to Email menu
Scan to Email
from the scan screen.
Set Enable to activate the scanning and
Scan to PC
sending it via network.
Enables or disables the Scan to SMB option
Scan to SMB
from the scan screen.
Enables or disables the Scan to FTP option
Scan to FTP
from the scan screen.
You can set the machine to delete previous job
On Demand
information on HDD as you store new job
Image Overwrite
information. Set this option to Enable, go to the
General tab > On Demand Overwrite, press
Start in the display to start the overwriting job.
If you select Enable, the machine renews the
Immediate Image
HDD memory when you save new job on it.
Overwrite
Description

Adjusting the color contrast

This menu allows you to adjust the color setting.
Press Machine Setup on the control panel.
1
Press Admin Setting. When the login message pops up, then enter
2
password and press OK.
Press the Setup tab > Color.
3
Option
This item allows you to calibrate toner density for the
Toner Density
best possible color print quality.
Calibration
This item allows you to adjust contrast, color by
Custom Color
color.
CMYK: Allows you to adjust the contrast of the toner
in each toner cartridge.
• Default: Optimizes colors automatically.
• Manual Adjust: Allows you to manually
adjust the color contrast for each cartridge.
Note:
color quality.
10.8
<Machine status and advanced setup>
Description
You should use the Default setting for best