KYMCO Bet & Win 250 Manual page 7

1
. GENERAL INFORMATION
n After routing, check that the wire harnesses
are not twisted or kinked.
n Wire harnesses routed along with handlebar
should not be pulled tight, have excessive
slack or interfere with adjacent or
surrounding parts in all steering positions.
n When a testing device is used, make sure to
understand the operating methods
thoroughly and operate according to the
operating instructions.
Do you
understand the
instrument？
n Be careful not to drop any parts.
n When rust is found on a terminal, remove
the rust with sand paper or equivalent
before connecting.
Remove
Rust
www.PlanDeGraissage.org
n Symbols:
The following symbols represent the
servicing methods and cautions included in
this service manual.
: Apply engine oil to the
specified points. (Use
designated engine oil for
Engine Oil
lubrication.)
Grease : Apply grease for lubrication.
: Transmission Gear Oil (90#)
Gear Oil
: Use special tool.
Special
＊
: Caution
: Warning
Bet & Win 250
1-6