KYMCO Bet & Win 250 Manual page 132

12
. COOLING SYSTEM
WATER PUMP SHAFT REMOVAL
Disconnect the water hose from the right
crankcase cover.
Remove the eight bolts attaching the right
crankcase cover.
Remove the water pump bearing snap ring
from the water pump assembly.
Remove the water pump shaft and inner
bearing.
Remove the water pump shaft outer
bearing.
12-11
www.PlanDeGraissage.org
Bolts
Water Pump Assembly
Water Pump Assembly
Snap Ring
Water Pump Assembly
Bet & Win 250
Inner Bearing
Water Pump Shaft
Inner Bearing