KYMCO Bet & Win 250 Manual page 34

2
. EXHAUST MUFFLER/FRAME COVERS
FRONT UPPER COVER REMOVAL
Remove the four screws on the back of the
front upper cover.
Remove the front upper cover.
The installation sequence is the reverse of
removal.
FRONT LOWER COVER REMOVAL
First remove the front upper cover.
Remove the two screws attaching the front
lower cover.
Remove the four screws on the back of the
front lower cover.
Disconnect the right/left turn signal light wire
connectors.
Remove the front lower cover
The installation sequence is the reverse of
removal.
BACK COVER REMOVAL
Remove the front cover.
Remove the key moldings.
Remove the fuel cap moldings.
Remove the back cover bolt.
Remove the screws attaching fuel tank inlet
tube join.
Remove the back cover.
2-5
www.PlanDeGraissage.org
Screws
Screws
Screws
Fuel Cap Moldings
Bolt
Breather Tube
Bet & Win 250
Screws
Key Moldings
Screws
Fuel Tank Inlet Tube