Table of Contents
Advertisement
RECORDING
Note: With AUTO TRACK ON, the recorder will stop and go
to REC STANDBY for 1 minute and then goes to Stop
mode automatically. Recordings from DAT, DCC or
recordings made analogously will stop after 20 seconds
silence. With AUTO TRACK OFF, the auto stop
mode is disabled.
Important:
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs.
Finalized CDRW discs play only on CDRW compatible
CD players.
For recording from CD changers always use REC EXT
DISC.
Autostart recording from external CD player
CD-SYNC
OPEN / CLOSE
OPEN / CLOSE
PLAY / PAUSE
PLAY / PAUSE
REC
STOP
STOP
TYPE
RECORD
FINALIZE
ANALOG
PROG
Preparing for autostart recording
The CD-SYNC feature enables you to make fast and easy
recordings of a CD. Track increments are automatically
detected from the source material. Track increments cannot
be added manually. In analog source material a silence of 2.7
seconds or more is automatically detected as a track
increment.
1 Make sure the disc is absolutely free of scratches and dust
particles.
2 Press EXT(ernal) SOURCE repeatedly until (depending on the
digital connection used):
DIGITAL I d, OPTICAL I p or ANALOG a lights up
and DIGITAL 1, OPTICAL or ANALOG appears on
the display.
REM
REC
TIME
TRACK
TOTAL
SYNC MANUAL
RECORD
CHANGER
DIGITAL
I
CD
OPTICAL
I
RW
ANALOG
20
EXT
ERASE
SOURCE
RW
CDR 775 AUDIO CD RECOR
DER
SHUFFL E
PHONES
DISPLA Y
SCROLL
REPEAT
DJ MODE
TRACK
TIME
STEP
REM
PROG
SHUFFLE
ALL
CD
REPEAT
RW
SCAN
TRACK
3 With the CD recorder stopped, press REC TYPE
five times: if you wish to record a complete disc or program.
f RECORD g and
SYNC
shows REC EXT DISC.
REM
REC
TIME
TRACK
TOTAL
SYNC
MANUAL
RECORD
CHANGER
DIGITAL
I
CD
OPTICAL
I
RW
ANALOG
• If CHECK INPUT message also flashes, the digital
connection is incorrect.
Start autostart recording
1 To start recording, press PLAY on the selected source.
The CD recorder automatically starts to record and
f RECORD g lights continuously. The recording time
left appears on the display.
• If, however, you start the source during a track, CD-SYNC
recording starts at the beginning of the next track or after
2.7 seconds of silence in analog recordings.
• To check the elapsed recording time, press DISPLAY. (This
can also be done during recording)
• The recorder stops automatically.
2 To stop recording manually, press STOP on the CD recorder.
WAIT lights up and
SYNC
• If STOP 9 was pressed within 3 seconds after pressing
PLAY, no recording will take place.
• To interrupt recording, press PAUSE on the CD recorder.
f RECORD g starts to flash. To resume, press
RECORD on the CD recorder.
After recording the display will show UPDATE for several
seconds.
Note: Recordings from DAT, DCC or analog sources will only
stop after 20 seconds silence.
Important:
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs.
Finalized CDRW discs play only on CDRW compatible
CD players.
For recording from CD changers always use REC EXT
DISC.
start to flash and the display
REM
TRACK
TIME
STEP
PROG
SHUFFLE
ALL
CD
REPEAT
RW
SCAN
TRACK
and f RECORD g go out.
Advertisement
Table of Contents
