Autostart Recording From External Cd Player Cd-Sync - Philips CDR775/777 Instructions For Use Manual

RECORDING
DISC.
Autostart recording from external CD player
CD-SYNC
OPEN / CLOSE
OPEN / CLOSE PLAY / PAUSE REC
PLAY / PAUSE
STOP STOP
RECORD
TYPE
FINALIZE
ANALOG
PROG
SHUFFL E
The CD-SYNC feature enables you to make fast and easy
recordings of a CD. Track increments are automatically
detected from the source material. Track increments cannot
be added manually. In analog source material a silence of 2.7
seconds or more is automatically detected as a track
increment.
Preparing for autostart recording
1 Make sure the disc is absolutely free of scratches and dust
particles.
2 Press EXT(ernal) SOURCE repeatedly until (depending on the
digital connection used):
DIGITAL I, OPTICAL I or ANALOG lights up and
DIGITAL 1, OPTICAL or ANALOG appears on the
display.
REM REC TIME TRACK TOTAL
SYNC MANUAL
RECORD
DIGITAL I CD CHANGER
OPTICAL I
RW
ANALOG
3 With the CD recorder stopped, press REC TYPE four times:
if you wish to record a complete disc or program.
start to flash and the display shows REC
d and
SYNC
EXT DISCand WAIT followed by the track number,
the total remaining time and START SOURCE.
REM REC TOTAL
TIME TRACK
SYNC MANUAL
DIGITAL I CHANGER
CD
OPTICAL I
RW
ANALOG
• If input label (DIGITAL I) flashes, the digital connection is
incorrect.
Start autostart recording
1 To start recording, press PLAY on the selected source.
The CD recorder automatically starts to record and d
lights continuously. The track number and track time
appear on the display.
20
EXT
ERASE
SOURCE
RW
CDR 77X AUDIO CD RECOR
DER
PHONES
DISPLAY SCROLL REPEAT DJ MODE
REM TRACK TIME STEP
PROG
SHUFFLE ALL
CD
REPEAT
RW
SCAN TRACK
REM TRACK TIME STEP
RECORD
PROG
SHUFFLE ALL
CD
REPEAT
RW
SCAN TRACK
• If, however, you start the source during a track, CD-SYNC
recording starts at the beginning of the next track or after
2.7 seconds of silence in analog recordings.
• To check the remaining recording time on the CDR(W), press
DISPLAY. (This can also be done during recording.)
• The EASY JOG/ENTER key can be used to adjust the
recording level.
• The recorder stops automatically.
2 To stop recording manually, press STOP on the CD recorder.
UPDATE lights up and
SYNC
• If STOP 9 was pressed within 3 seconds after pressing
PLAY, no recording will take place.
• To interrupt recording, press PAUSE on the CD recorder.
d starts to flash. (Autostart recording is disabled.) To
resume, press RECORD on the CD recorder.
After recording the display will show UPDATE for several
seconds.
Note:
- Recordings from DAT, DCC or analog sources will only stop
after 20 seconds silence.
- Auto track is always active.
Important:
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalized. See
finalizing discs.
Finalized CDRW discs play only on CDRW compatible
CD players.
For recording from CD changers always use REC EXT
DISC.
and d go out.