NordicTrack NTBE19.1 User Manual page 8

6. Attach the Backrest (6) to the Backrest Frame
(3) with two M6 x 25mm Screws (26), an
M6 x 70mm Screw (31), and an M6 Washer (13);
start all three Screws, and then tighten them.
7. Pull the indicated Adjustment Knob (8), insert the
Backrest Bracket (7) through the rear bracket
(A) on the Frame (1), and then release the
Adjustment Knob into one of the adjustment
holes in the Backrest Bracket.
Next, have a second person hold the end of
the Backrest Frame (3) inside of the U-bracket
(B) on the Frame (1) until assembly step 9 is
completed.
Then, tighten an M6 x 10mm Screw (25) into the
small hole in the end of the Backrest Bracket (7).
Note: To adjust the Backrest (6), see
ADJUSTING THE BACKREST on page 10.
6
6
7
6
3
B
1
8
3
13
31
A
8
7
25
26
26