AEG LFR6194O4Q User Manual page 43

Table of Contents

Advertisement

14.4 Descaling
If the water hardness in your
area is high or moderate, we
recommend that you use a
water descaling product for
washing machines.
Regularly examine the drum to check for
limescale.
The regular detergents already contain
water softening agents, but we
recommend to run a cycle with empty
drum and a descaling product
occasionally.
Always follow the
instructions that you find on
the packaging of the
product.
14.5 Maintenance wash
The repeated and prolonged use of low
temperature and short programmes can
cause detergent deposits, fluff residues,
bacterial growth and biofilm formation
inside the drum and the tub. This could
generate bad odours and mildew.
To eliminate these deposits and
hygienize the inner part of the appliance,
run a maintenance wash at least once a
month:
1. Remove all laundry from the drum.
2. Deactivate AutoDose function for
detergent and softener.
3. Run a cotton programme with the
highest temperature with a small
quantity of powder detergent or, if
available, run the Limp. Máquina
programme.
14.6 Door seal
This appliance is designed with a self
cleaning draining system, allowing light
fluff fibers that fall off the clothes to be
drained out with the water. Regularly
examine the seal. Coins, buttons, other
small items can be recovered at the end
of the cycle.
Clean it when needed, using ammonia
cream cleanser agent without scratching
the seal surface.
Always obey the instructions
that you find on the
packaging of the product.
14.7 Cleaning the drum
Regularly examine the drum to prevent
unwanted deposits.
Rust deposits in the drum may occur due
to rusting foreign body in the washing or
tap water containing iron
Clean the drum with special products for
stainless steel.
Always follow the
instructions that you find on
the packaging of the
product.
Do not clean the drum with
acidic descaling products,
scouring products containing
chlorine or iron or steel wool.
For a thorough clean:
1. Clean the drum with special products
for stainless steel.
Always follow the
instructions that you find on
the packaging of the
product.
2. Remove all laundry from the drum.
3. Deactivate AutoDose function for
detergent and softener.
4. Run a short cotton programme at
high temperature with empty drum
and with a small quantity of powder
detergent or, if available, run the
Limp. Máquina programme. If your
appliance can be connected to Wi-Fi,
the special programme Limp.
ENGLISH
43

Advertisement

Table of Contents
loading

Table of Contents