Advertisement

Quick Links

LFR95146WS
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Summary of Contents for AEG ABSOLUTECARE 9000

  • Page 1 LFR95146WS User Manual Washing Machine USER MANUAL...
  • Page 2: Table Of Contents

    10. THE WATER SOFTENER (SOFT WATER)............. 22 11. PROGRAMMES....................25 WI-FI - CONNECTIVITY SETUP..............31 13. DAILY USE....................... 34 14. HINTS AND TIPS....................39 15. CARE AND CLEANING..................41 16. TROUBLESHOOTING..................47 17. CONSUMPTION VALUES................52 18. QUICK GUIDE....................54 19. ENVIRONMENTAL CONCERNS..............56 My AEG Care app...
  • Page 3: Safety Information

    ENGLISH FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 4 Children between 3 and 8 years of age and persons • with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. Children of less than 3 years of age should be kept •...
  • Page 5: Safety Instructions

    ENGLISH The appliance must be connected to the water mains • using the new supplied hose sets, or other new hose sets supplied by the Authorised Service Centre. Old hose sets must not be reused. • If the mains power supply cable is damaged, it must •...
  • Page 6 • You can extend the drain hose to building. maximum 400 cm. Contact the • Always use a correctly installed Authorised Service Centre for the shockproof socket. other drain hose and the extension.
  • Page 7: Product Description

    • The water softener function acts effectiveness of the stain remover. through special resins present in • The AEG Steam Fragrance, thanks the appliance. To regenerate the to the steam programmes offers the resins and make them ready to soften...
  • Page 8 3.2 Appliance overview 12 13 Worktop Feet for levelling the appliance Detergent dispenser and salt Drain hose compartment Inlet hose connection Control panel Mains cable Door handle Transit bolts Internal light Hose support Rating plate Drain pump filter The rating plate reports: A.
  • Page 9: Technical Data

    ENGLISH Compartment for washing phase: Maximum level for detergent/ powder detergent, stain remover. additives quantity. When using liquid When selecting a prewash detergent, make sure phase, put the detergent/ that the special additive in a dosing ball container for liquid inside the drum.
  • Page 10: Installation

    5. INSTALLATION 4. Open the door and remove the WARNING! polystyrene piece from the door seal Refer to Safety chapters. and all the items from the drum. 5.1 Unpacking WARNING! Remove all the packaging and the transit bolts before installing the appliance.
  • Page 11 ENGLISH Attach the sound barriers at a room temperature. 13. Pull up the appliance in vertical position. CAUTION! Do not use alcohol, solvents or chemical products. 9. Make sure to identify the different 14. Remove the power supply cable and sizes and the positions of the sound the drain hose from the hose holders.
  • Page 12 If you install the appliance on a plinth that is not an accessory supplied by AEG, secure the appliance with the fixing plates. This spare part is available in web shop or from authorised dealer. Read carefully the instructions supplied...
  • Page 13 ENGLISH 5.5 The inlet hose 5.6 Water drainage 1. Connect the water inlet hose to the The drain hose should be positioned at a back of the appliance. height of not less than 60 cm and not 2. Position it toward left or right more than 100 cm from the floor.
  • Page 14 6. Position the hose directly to a built- in drain pipe in the room wall and tighten it with a clamp. 5.7 Electrical connection The end of the drain hose must always be ventilated , At the end of installation you can connect i.e.
  • Page 15: Control Panel

    ENGLISH 6. CONTROL PANEL 6.1 Control panel description Sports Home Special The options are not selectable with all washing programmes. Check the compatibility between options and washing programmes in the "Options compatibility with programmes" paragraph in the "Programmes" chapter. An option can exclude another one, in this case the appliance doesn't allow you to set the incompatible options together.
  • Page 16 6.2 Display Door locked indicator. Washing phase indicator. It flashes during pre-wash and wash phase. Rinsing phase indicator. It flashes during rinse phase. Spinning and draining phase indicator. It flashes during spin and drain phase. Steam phase indicator. Anti-crease phase indicator.
  • Page 17 ENGLISH The digital indicator can show: • Programme duration (e. g. The time shown when the programme is set could not correspond to effective duration and change af‐ ter ProSense phase. • Maximum load. • Finish in time (e. g. •...
  • Page 18: Dial And Buttons

    7. DIAL AND BUTTONS 7.1 On/Off 7.4 Introduction Pressing this button for a few seconds The options/functions are allows to activate or deactivate the not selectable with all appliance. Two different tunes sound washing programmes. while switching the appliance on or off.
  • Page 19 ENGLISH 7.7 Finish in with this option is 2 kg (approximately 8 - 10 shirts). Set this option as last after When setting the Plus Steam option, the programme and other maximum load drops to 2 kg in the options selection, otherwise display and programme time is adjusted it can be cancelled if you accordingly.
  • Page 20 7.11 Time Save 7.13 Spin With this option you can decrease the When you set a programme, the programme duration. appliance automatically selects the default spin speed. • If your laundry is normally or lightly soiled, it may be advisable to shorten Touch this button repeatedly to: the washing programme.
  • Page 21: Settings

    ENGLISH Touch this button repeatedly until the The appliance empties the desired temperature value appears on water out automatically after the display. approximately 18 hours. When the display shows the indicators 7.14 Temperature , the appliance does not heat the water. When you select a washing programme, the appliance automatically proposes a default temperature.
  • Page 22: Before First Use

    1. Switch the appliance on by pressing 3. The display will show On/Off button. about 5 seconds. 2. Press and hold the Stains/Prewash and Time Save buttons for some seconds. 9. BEFORE FIRST USE the proper water hardness level.
  • Page 23 ENGLISH as shown in the next drawing) for we suggest to set the water softener also some seconds until the display during rinsing phase to preserve the shows the default level C04 and the fabric softness. indicator goes on. It means the Once you have entered the menu by water softener is active during pressing Temperature and the Spin...
  • Page 24 10.3 Pouring salt Salt The compartment can contain about The water softener function acts through 600 gr of salt that are sufficient for about special resins present in the appliance. two months if the default water hardness level (C04) is set and the water softener To regenerate the resins and make them is activated during wash phase only.
  • Page 25: Programmes

    11.1 My AEG Care app and additional hidden programmes My AEG Care app provides you with a wide choice of additional hidden programmes. Connect the appliance to My AEG Care and you will be able to choose the programme that suits your needs most.
  • Page 26 Washing programmes Programme Programme description Cotton and mixed synthetic fabrics. Ideal to wash your daily load in a short time, for a better clothes care and good cleaning AbsoluteWash 49min already at 30°C. Low energy cycle for cottons. Decreases temperature and ex‐...
  • Page 27 ENGLISH Programme Programme description Do not use fabric softener and make sure that Outdoor there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or in‐ ner insulation.
  • Page 28 Programme temperature, maximum spin speed and maximum load Programme Default tempera‐ Reference spin Maximum load ture speed Temperature Spin speed range range AbsoluteWash 49min 30 °C 1400 rpm - 400 rpm 5.0 kg 60 °C 1400 rpm 10.0 kg 40 °C...
  • Page 29 The fragrance (AEG Steam Fragrance) The AEG Steam Fragrance allows you to refresh even your delicate clothes, 11.4 Woolmark Wool Care - Green The wool wash cycle of this machine has been approved by The Woolmark Company for the washing of wool garments labelled as «hand wash»...
  • Page 30 11.5 Options compatibility with programmes Additional programmes and settings are available downloading the APP. Spin ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Rinse Hold ■ ■ ■...
  • Page 31: Wi-Fi - Connectivity Setup

    QR code can be used in two ways: Frequency 2.412 - 2.472 GHz • Scan the QR code with the built-in for European mar‐ camera app to download the My AEG Care application from the App store on your smart device and follow the Protocol IEEE 802.11b/g/n required steps.
  • Page 32 The access point will be open for about 3 Your email and password. If you do minutes. not have an account, create a new 5. Configure the My AEG Care app on one following the instructions in My your smart device and follow the AEG Care.
  • Page 33 ENGLISH 1. Touch the Remote start button and the indicator blinks on the display for a few seconds. Every time you switch the appliance on, the appliance takes about 10 seconds to connect to the network 2. Touch the Start/Pause button to automatically.
  • Page 34: Daily Use

    12.6 Wi-Fi Always On It is possible to turn the appliance on by pressing the On/Off button or through the The Wi-Fi Always On function is App. available in the App. The Wi-Fi Always On This function keeps the appliance...
  • Page 35 ENGLISH Filling the liquid detergent 2. Put the powder detergent in the compartment . If using liquid 1. Insert the proper container for liquid detergent, refer to 'Filling the liquid detergent. detergent'. 2. Pour the liquid detergent in the 3. If desired, pour the fabric softener in compartment the compartment 3.
  • Page 36 To change or cancel this declared load for the set programme (only for a few seconds), the default option: temperature, the default spin speed and the washing phase indicators (when 1. Switch the appliance off by means of available).
  • Page 37 ENGLISH When the phase ends the relevant In case of in case of indicator stops flashing and is steady on. drum overload, the The next phase indicator starts flashing. maximum declared load indicator comes on again with the indicator E.g. the rinse phase is running: blinking.
  • Page 38 (if they are If the ProSense phase is active). already carried out and the water filling is already In the display all washing phase started, the new programme indicators become steady and the time starts without repeating the area shows .
  • Page 39: Hints And Tips

    ENGLISH Press the On/Off button to activate • If you have set , the appliance the appliance again. drains the water and spins. • After 5 minutes from the end of the • If you have set , the appliance washing programme only drains the water.
  • Page 40 First, follow these generic rules: – powder detergents (also tablets and single-dose detergents) for all types of fabric, excluding delicate. Prefer powder detergents containing bleach for whites and laundry sanitization, – liquid detergents (also single-dose detergents) , preferably for low •...
  • Page 41: Care And Cleaning

    ENGLISH • Loading the appliance to the use a water softener for washing maximum capacity indicated for machines. each programmes helps to reduce In areas where the water is soft it is not energy and water consumption. necessary to use a water softener. •...
  • Page 42 Machine Clean CAUTION! programme. Do not use alcohol, solvents or chemical products. 15.6 Door seal CAUTION! This appliance is designed with a self Do not clean the metal cleaning draining system, allowing light surfaces with chlorine-based fluff fibers that fall off the clothes to be detergent.
  • Page 43 ENGLISH Always follow the instructions that you find on the packaging of the product. 2. Remove all laundry from the drum. 3. Run a short cotton programme at high temperature with empty drum and with a small quantity of powder detergent or, if available, run the Machine Clean programme.
  • Page 44 4. Make sure that all detergent residue Regularly check the drain is removed from the detergent pump filter and make sure conveyor. Use a cloth. that it is clean. Clean the drain pump if: • The appliance does not drain the water.
  • Page 45 ENGLISH contact the Authorised Service Centre. 4. Turn the filter 180 degrees in anti- clockwise direction to open it, without removing. Let the water flow out. 10. Clean the filter under the water tap. 11. Put the filter back into the special guides by turning it clockwise.
  • Page 46 When you drain the water with the 3. Clean the valve filter on the back of emergency drain procedure, you must the appliance with a toothbrush. activate the drain system again: a. Put 2 litres of water in the main wash compartment of the detergent dispenser.
  • Page 47: Troubleshooting

    ENGLISH 1. Put 2 litres of water in the main wash 3. Put the two ends of the inlet hose in compartment of the detergent a container and let the water flow out dispenser. of the hose. 2. Start the programme to drain the 4.
  • Page 48 • Make sure that the water tap is open. • Make sure that the pressure of the water supply is not too low. The appliance does For this information, contact your local water authority. not fill with water prop‐...
  • Page 49 ENGLISH Problem Possible solution • Make sure that the mains plug is connected to the mains socket. • Make sure that the appliance door is closed. • Make sure that there is no damaged fuse in the fuse box. The programme does •...
  • Page 50 Problem Possible solution • Check the wireless signal. • Check if your smart device is connected to the wireless net‐ work. • Check your home network and router. The App cannot con‐ • Restart the router. nect to the appliance.
  • Page 51 ENGLISH Problem Possible solution • Check if the water softener has been set to act also during Excessive consump‐ rinse phase. Refer to "How to set the water hardness level" in tion of salt. "The Water Softener (Soft Water)" chapter. •...
  • Page 52: Consumption Values

    1. Pull the drawer out. 2. Eliminate any trace of detergent or additive and clean the compartment thoroughly. 3. Insert the drawer back and pour salt Salt in the compartment 4. Close the drawer. 5. Run a cotton or synthetic cycle, without reducing time, to restore the water softener function.
  • Page 53 ENGLISH Values and programme duration may differ depending on different conditions (e.g. room temperature, water temperature and pressure, load size and type of laundry, supply voltage) and also if you change the default setting of a programme. 17.3 According to UK Ecodesign for Energy- Related Products and Energy Information Regulations and...
  • Page 54: Quick Guide

    Programme Litres hh:mm °C Cottons 10.0 1.550 80.0 03:50 52.00 55.0 1400 60°C Cottons 10.0 0.350 80.0 03:10 52.00 20.0 1400 20°C Synthetics 0.800 50.0 02:25 35.00 40.0 1200 40°C Delicates 0.300 45.0 01:10 35.00 30.0 1200 30°C Wool 0.250...
  • Page 55 ENGLISH 18.2 Cleaning the drain pump filter 180˚ Clean the filter regularly and, especially, if the alarm code appears on the display. 18.3 Programmes Programmes Load Product description Cotton and synthetic items. This programme 5.0 kg ensures a good washing performance in a AbsoluteWash 49min short time.
  • Page 56: Environmental Concerns

    Programmes Load Product description All fabrics, except woollens and very delicate 10.0 kg fabrics. Programme for rinsing and spinning. Rinse To spin the laundry and to drain the water in 10.0 kg the drum. All fabrics, except woollens and del‐...
  • Page 60 My AEG Care app The software in this product contains components that are based on free and open source software. AEG gratefully acknowledges the contributions of the open software and robotics communities to the development project. To access the source code of these free and open source software components whose license conditions require publishing, and to see their full copyright information and applicable license terms, please visit: http://aeg.opensoftwarerepository.com (folder NIUS)

This manual is also suitable for:

Lfr95146ws

Table of Contents