Table of Contents
Advertisement
34
www.aeg.com
11.2 Installing and
configuring My AEG Care
My AEG Care allows you to
control your laundry through
a mobile device.
It contains a large number of
programmes, useful features
and product information
tailored perfectly to the
appliance.
Through the app you can
select the programmes
already available from the
appliance control panel, plus
unlock additional
programmes available only
from a mobile device.
Additional programmes can
change over the time along
with new versions of the
app.
It's personalized laundry
care - all from your mobile
device.
When connecting the appliance to the
application, stand near it with your smart
device.
Make sure that your smart device is
connected to the wireless network.
1. Go to the App Store on your smart
device or scan QR code (
code on rating plate' paragraph ).
2. Download and install the My AEG
Care App.
3. Make sure you started a Wi-fi
connection in the appliance. If not,
read the next paragraph 'Configuring
the appliance wireless connection'.
4. Start the application. Select the
country and language and login with
Your email and password. If you do
not have an account, create a new
one following the instructions in My
AEG Care.
5. Follow the instructions on the App for
the appliance registration and
configuration.
11.3 Configuring the washing
machine wireless connection
1. Press and hold the On/Off button for
a few seconds to activate the
appliance. Wait about 10 seconds
before proceeding with wireless
configuration.
2. Press and hold the AutoDose Liquid
Detergent
Fabric Softener
seconds simultaneously until a 'click'
sounds. Release the buttons.
appears on the display for 5 seconds
and the indicator
The wireless module begins starting up.
3. After about 45 seconds,
(Access Point) appears on the
display.
see 'QR
The access point will be open for about 3
minutes.
4. Configure the "My AEG" app on your
smart device and follow the
instructions to connect the appliance
to your Wi-Fi network.
5. If the connectivity is configured, when
the programme information screen
returns, the indicator
display.
and the AutoDose
buttons for a few
starts blinking.
Make sure that you APP is
ready for connection.
As long as the appliance is
activated, it will keep trying
to connect with saved
credentials until the Wi-Fi is
deactivated or resets the
credentials.
is on the
Advertisement
Table of Contents
