AEG LFR61944AD User Manual
  1. Manuals
  2. Brands
  3. AEG Manuals
  4. Washer
  5. LFR61944AD
  6. User manual

AEG LFR61944AD User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
LFR61944AD
USER
MANUAL
EN
User Manual
Washing Machine

Advertisement

Table of Contents
loading

Related Manuals for AEG LFR61944AD

Summary of Contents for AEG LFR61944AD

  • Page 1 LFR61944AD User Manual Washing Machine USER MANUAL...

  • Page 2: Table Of Contents

    9. THE AUTODOSE TECHNOLOGY (AUTODOSING).......... 21 10. PROGRAMMES ....................28 WI-FI - CONNECTIVITY SETUP..............32 12. DAILY USE....................... 35 13. HINTS AND TIPS....................39 14. CARE AND CLEANING..................41 15. TROUBLESHOOTING..................48 16. CONSUMPTION VALUES................52 17. QUICK GUIDE....................54 18. ENVIRONMENTAL CONCERNS..............56 My AEG Care app...

  • Page 3: Safety Information

    ENGLISH FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
  • Page 4 Children between 3 and 8 years of age and persons • with very extensive and complex disabilities shall be kept away from the appliance unless continuously supervised. Children of less than 3 years of age should be kept •...

  • Page 5: Safety Instructions

    If a tumble dryer is stacked on the top of the washing • machine, make sure to use the correct stacking kit approved by AEG (see more details in chapter "Accessories - Stacking kit"). 2. SAFETY INSTRUCTIONS 2.1 Installation than 0°C or where it is exposed to the...
  • Page 6 Service Centre to ensure which • Do not use an extension hose if the accessories can be used. inlet hose is too short. Contact the Authorised Service Centre for the 2.2 Electrical connection replacement of the inlet hose. • When unpacking the appliance, It is...

  • Page 7: Technical Data

    ENGLISH heaters and heating elements, status of the appliance. They are not including heat pumps, piping and intended to be used in other related equipment including hoses, applications and are not suitable for valves, filters and aquastops, printed household room illumination. circuit boards, electronic displays, 2.6 Disposal pressure switches, thermostats and...

  • Page 8: Product Description

    4. PRODUCT DESCRIPTION 4.1 Special features interact with your washing machine and to check the washing cycle status Your new washing machine meets all in remote control. modern requirements for an effective • The ProSense System detects the treatment of laundry with low water,...

  • Page 9: Installation

    ENGLISH The rating plate reports: A. QR code Mod. xxxxxxxxx Prod.No. 910000000 00 B. model name 000V ~ 00Hz 0000 W C. product number 00000000 D. electrical ratings B C D E. serial number 5. INSTALLATION supply cable and the drain hose from WARNING! the hose holders.
  • Page 10 5.2 Installation on suspended flooring Suspended wooden floors are The appliance must be level and stable. particularly susceptible to vibration. A correct adjustment of the To limit vibration we recommend placing appliance level prevents the a waterproof wooden panel, at least 15 vibration, noise and the mm thick, under the appliance.
  • Page 11 ENGLISH You can extend the drain hose to maximum 400 cm. Contact the authorized 45º 45º service centre for the other 20º 20º drain hose and the extension. It is possible to connect the drain hose in different ways: 1. Make a U shape with the drain hose and put it around the plastic hose guide.
  • Page 12 6. Position the hose directly to a built- in drain pipe in the room wall and tighten it with a clamp. 5.6 Electrical connection The end of the drain hose must always be ventilated , At the end of installation you can connect i.e.

  • Page 13: Accessories

    If you install the appliance on a plinth WARNING! that is not an accessory supplied by Do not put the tumble dryer AEG, secure the appliance in the fixing under the washing machine. plates. Verify the compatible stacking kit by checking the Read carefully the instructions supplied depth of your appliances.
  • Page 14 The options are not selectable with all washing programmes. Check the compatibility between options and washing programmes in the "AutoDose and options compatibility with programmes" paragraph in the "Programmes" chapter. An option can exclude another one, in this case the appliance doesn't allow you to set the incompatible options together.
  • Page 15 ENGLISH Press this button repeatedly to activate one of the two options or both. The relevant indicator comes on. • Intensive By setting this option, the indicator appears close to detergent symbol, and the appliance will automatically dose an extra amount of detergent when automatic detergent tank is enabled.
  • Page 16 Press this button repeatedly to activate one of the two options or both. The relevant indicator comes on in the display. • Remote Select this option to connect appliance with App. Touch this button, the display shows the indicator blinking for a few seconds.
  • Page 17 ENGLISH When you set a programme, the appliance automatically selects the maximum spin speed. Touch this button repeatedly to: • Decrease the spin speed. The display shows only the spin speeds available for the set pro‐ gramme. • Activate the Rinse Hold option . The water of the last rinse is not drained out to prevent the fabrics from creasing.
  • Page 18 When you select a washing programme, the appliance automatically proposes a default temperature. Touch this button repeatedly until the desired temperature value ap‐ Temp. pears on the display. touch but‐ When the display shows the indicators , the appliance does not heat the water.
  • Page 19 ENGLISH It is possible to visualise the total operating time of the appliance in hours, starting from the first switching on. This value will count operat‐ ing time of the cycles (does not include pauses, delayed start time). To visualise this value, proceed as follows: 1.
  • Page 20 Door locked indicator. Delay start indicator. The digital indicator can show: • Programme duration (e. g. • Delay time (e. g. • Cycle end ( ). • Warning code (e.g. • Indication of total operating hours of the appliance. Refer to the "Oper‐...

  • Page 21: Before First Use

    ENGLISH Linked mode indicator. It lights when both compartments are linked and filled with the same detergent. AutoDose functionality for softener, is disa‐ ble. These indicators will appear next to detergent tank and softener tank indicators when increasing or decreasing the automatic detergent or softener dosage.
  • Page 22 AutoDose display. In some programmes, Manual AutoDose is OFF (OFF is on and the indicators and/or are off in the display) because there are garments requiring special detergents or treatments. When OFF is...
  • Page 23 ENGLISH 9.3 AutoDose basic setting 1. Identify the water hardness level. Check the water hardness level in The factory pre-set doses for a large your area. The levels are generally load are 90 ml for detergent tank and indicated as: soft, medium and hard. 25 ml for fabric softener tank: the If necessary, please contact your optimal configuration to meet majority...
  • Page 24 9.5 Filling the detergent and additives on AutoDose system Please read "Detergents and other treatments" in "Hints and tips" chapter. We recommend that you do not exceed the maximum indicated level ( 4. Touch related tank buttons to toggle 1.
  • Page 25 ENGLISH 4. Gently pour only liquid softener in the 9.6 AutoDose low level AutoDose fabric softener tank . Fill indication up to the maximum indicated level Do not refill the AutoDose tanks unless appliances indicates that one or both tanks are empty. When the activated tank reaches a low level of detergent, related indicator blinks slowly and continuously on the display.
  • Page 26 9.7 Switching from AutoDose to manual dosing It is possible to disable AutoDose function for one or both tanks by pressing related button symbol. Example: • To switch Fabric Softener tank off, 2. After about 10 seconds the display...
  • Page 27 ENGLISH 2. Pour the liquid detergent in the 3. If desired, pour the fabric softener in compartment the compartment Manual 3. Gently close the detergent dispenser, 4. Gently close the detergent dispenser, till click engagement. till click engagement. If the machine has not been used for more than 4 weeks with filled tanks, detergent/ softener can become...

  • Page 28: Programmes

    This will happen even if the user turned To restart the programme, ensure the AutoDose off. drawer is properly closed and press Start/Pause button. 10. PROGRAMMES 10.1 Programme Chart Washing programmes The programmes are described in this chart following the order of the selector dial from the top to the bottom.
  • Page 29 ENGLISH Programme Programme description Outdoor Do not use fabric softener and make sure that there is no softener residue in the detergent dispenser. Outdoor clothing, technical, sport fabrics, waterproof and breathable jackets, shell jackets with a removable fleece or inner insulation. The recommended laundry load is 2,5 kg.
  • Page 30 Programme Default temperature Reference spin Maximum load Temperature range speed Spin speed range 30 °C 800 rpm 2 kg 40 °C - Cold 1200 rpm - 400 rpm Delicates 40 °C 1200 rpm 1,5 kg 40 °C - Cold...
  • Page 31 ENGLISH Others Spin ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ ■ Intensive Prewash ■ ■ ■ Extra Rinse ■ ■ ■ ■ ■ ■...

  • Page 32: Wi-Fi - Connectivity Setup

    -- = Not recommended 10.2 My AEG Care app and additional programmes Some programs are downloadable only by the App My AEG Care. In the App you can find a complete description of each programme. Programme names are subject to change depending on market requirements without notice.
  • Page 33 'QR device or scan QR code ( SCANNING... code on rating plate' paragraph ). 2. Download and install the My AEG Care App. 3. Make sure you started a Wi-fi connection in the appliance. If not, read the next paragraph 'Configuring Mod.
  • Page 34 This 4. Configure the "My AEG" app on your function is deactivates when smart device and follow the door is open. instructions to connect the appliance to your Wi-Fi network.

  • Page 35: Daily Use

    ENGLISH 11.5 Over-the-air update buttons or turn the knob to return to normal use. The App may propose an update for your appliance. 11.6 Wi-Fi Always On The update is accepted via App only. The Wi-Fi Always On function is If a programme is running, the App available in the App.
  • Page 36 12.3 Setting a programme The ProSense estimation starts at the end of the If you wish to change the countdown. automatic detergent or fabric Cancelling the delay start softener dosage, enter the after the countdown has AutoDose configuration started mode before proceeding with any programme setting.
  • Page 37 ENGLISH 12.6 The ProSense load About 20 minutes after the detection programme start, the programme duration could The programme duration in be adjusted again depending the display is referred to a on the capacity of water medium/high load. absorption of the fabrics. After touching the Start/Pause button, TheProSense detection is the maximum declared load indicator...
  • Page 38 12.9 Cancelling a running 12.11 End of the programme programme When the programme has finished, the appliance stops automatically. The 1. Press the button On/Off to cancel the acoustic signals operate (if they are programme and to deactivate the active).

  • Page 39: Hints And Tips

    ENGLISH 1. If necessary, touch the Spin button to • You do not use the appliance for 5 decrease the spin speed proposed minutes before you touch the Start/ by the appliance. Pause button. 2. Touch the Start/Pause button: Press the On/Off button to activate the appliance again.
  • Page 40 (delicates, woollens, cottons, etc), the colour of clothes, size of the load, degree of soiling, wash temperature and hardness of the water used. • Follow the instructions that you find on packaging of the detergents or other treatments without exceeding the indicated maximum level ( •...

  • Page 41: Care And Cleaning

    ENGLISH laundry in a tumble dryer. This will To find out the water hardness in your save energy during drying! area, contact your local water authority. Use the correct quantity of additive for 13.5 Water hardness water softening. Follow the instructions that you find on the packaging of the If the water hardness in your area is high product.
  • Page 42 14.4 Descaling If the water hardness in your area is high or moderate, we recommend that you use a water descaling product for washing machines. Regularly examine the drum to check for limescale. The regular detergents already contain Clean it when needed, using ammonia...
  • Page 43 ENGLISH clean is also downloadable through 2. Remove the insert for the softener the APP. and, if inserted, the container for 5. Add a manually small quantity of liquid detergent. powder detergent or a specific product into the empty drum, in order to rinse out any left residues.
  • Page 44 7. Make sure that all detergent residue is removed from the conveyor. Use only soft damp clothes. 8. Put bottom cover back to its position by aligning its holes on drawer hooks as indicated in the picture. Close it till "click"...
  • Page 45 ENGLISH 9. Make sure that all detergent residue is removed from the upper and lower part of the recess. Use a small brush to clean the recess. WARNING! Do not clean with any sharp and metal brushes ora any tools, pumps or sensors allocated on the back of the detergent drawer.
  • Page 46 Proceed as follows to clean the pump: To restore the functionality, refill tanks with detergent 1. Open the pump cover. and softener. If you place a wrong additives in the tanks, you can easily recover it by using the drain plug on both side of the drawer.
  • Page 47 ENGLISH 8. If it is necessary, remove fluff and 12. Close the pump cover. objects from the filter recess. 9. Make sure that the impeller of the pump can rotate. If it does not rotate, contact the Authorised Service Centre. When you drain the water with the emergency drain procedure, you must activate the drain system again:...

  • Page 48: Troubleshooting

    14.11 Emergency drain 2. Remove the inlet hose from the appliance by loosening the ring nut. If the appliance cannot drain the water, carry out the same procedure, described in 'Cleaning the drain pump' paragraph. If necessary, clean the pump.
  • Page 49 ENGLISH 15.1 Alarm Codes and Possible failures The appliance does not start or it stops during operation. First try to find a solution to the problem (refer to the tables). WARNING! Deactivate the appliance before carrying out any check. With some problems, the display shows an alarm code and the Start/Pause button may flash continuously: Problem Possible solution...
  • Page 50 • Disconnect the appliance and close the water tap. Contact the Authorised Service Centre. The anti-flood device is on. If the display shows other alarm codes, deactivate and activate the appliance. If the problem continues, contact the Authorised Service Centre.
  • Page 51 ENGLISH Problem Possible solution • Check the wireless signal. • Make sure that the wireless connection is on. Refer to para‐ graph "Configuring the washing machine wireless connection" The display does not in "Wi-Fi - Connectivity setup" chapter. show the wireless indi‐ •...

  • Page 52: Consumption Values

    Problem Possible solution • Increase the detergent quantity or use a different detergent. • Use special products to remove the stubborn stains before you wash the laundry. • Make sure that you set the correct temperature. • Decrease the laundry load.
  • Page 53 ENGLISH 16.2 Legend Laundry load. hh:mm Programme duration. Energy consumption. °C Temperature in the laundry. Litres Water consumption. Spin speed. Remaining moisture at the end of spinning phase. The higher is the spin speed, the higher is the noise and the lower is the remaining moisture. Values and programme duration may differ depending on different conditions (e.g.

  • Page 54: Quick Guide

    Programme Litres hh:mm °C Cottons 2.75 4:00 1400 95°C Cottons 1.65 3:30 1400 60°C Cottons 0.35 3:00 1400 20°C Synthetics 0.85 2:30 1200 40°C Delicates 0.35 1:25 1200 30°C Wool 0.30 1:05 1200 30°C 1) Reference indicator of the spin speed.
  • Page 55 ENGLISH 17.2 Cleaning the drain pump filter 180˚ Clean the filter regularly and, especially, if the alarm code appears on the display. 17.3 Programmes Programmes Load Product description Cotton and synthetic items. This programme en‐ 5 kg MixLoad 69min sures a good washing performance in a short time. White and coloured cottons.

  • Page 56: Environmental Concerns

    Programmes Load Product description White cotton items. This program removes more 9 kg than 99,99% of bacteria and viruses . It also en‐ Hygiene sure a proper reduction of allergens. 1) Washing programme. 2) Washing programme and waterproofing phase.
  • Page 60 My AEG Care app The software in this product contains components that are based on free and open source software. AEG gratefully acknowledges the contributions of the open software and robotics communities to the development project. To access the source code of these free and open source software components whose license conditions require publishing, and to see their full copyright information and applicable license terms, please visit: http://aeg.opensoftwarerepository.com (folder NIUS)

Table of Contents