Table of Contents
Advertisement
Operating Hours
Counter
Factory Reset
1) Before setting this option, select a suitable washing programme for the garments. The appliance will
performs the most fitting spin cycle for your garments care (e.g. For synthetics items, first select the Sin‐
téticos washing programme and then the Only spin option).
7.2 Display
Maximum load indicator. The
estimation (refer to ProSense load detection paragraph) .
Maximum laundry indicator. It blinks if the laundry amount exceeds the
declared load.
Remote connection indicator.
Wi-Fi connection indicator.
It is possible to visualise the total operating time of the appliance in
hours, starting from the first switching on. This value will count operat‐
ing time of the cycles (does not include pauses, delayed start time).
To visualise this value, proceed as follows:
1. Switch the appliance on by pressing On/Off button.
2. Turn the programme knob to the first position.
3. Press and hold the Lav.Intenso/Pre-Lav. and Inicio Diferido but‐
tons for some seconds (within 10 seconds after the switching on.
After these 10 seconds, the key combination activates and deacti‐
vates the acoustic signals).
4. After 3 seconds the total hours operated by the appliance are
shown in the display: e.g. 1276 hours, the display shows the text
Hr for 2 seconds, 12 (thousands and hundreds) for 2 seconds
and 76 (tens and units).
If the procedure does not work (due to timeout,
wrong programme dial position or wrong keys combi‐
nation), switch the appliance off and repeat se‐
quence from the beginning.
To return to the factory settings press and hold the Extra Rápido and
Centrif. buttons for some seconds.
indicator flashes during the laundry load
ENGLISH
19
Advertisement
Table of Contents
