Table of Contents
Advertisement
Section 4 - Configuration
UPnP IGD (Universal Plug and Play Internet Gateway Device) is a protocol that
allows ports to automatically be mapped between your devices behind your
NAT and the Internet.
Enable:
Toggle this switch to enable or disable UPnP. If it is enabled, a table
will appear indicating active UPnP connections.
IPv4 IGD
Protocol:
Indicates the protocol used by the UPnP connection.
IP:
Indicates the internal IP used by the UPnP connection.
Private Port:
Indicates the internal port used by the used by the UPnP connection.
Public port:
Indicates the port exposed to the internet used by the UPnP
connection.
Description:
Indicates the description of the protocol used by the UPnP connection.
D-Link DIR-615+ User Manual
Advanced
UPnP IGD
87
Advertisement
Table of Contents
