D-Link DIR-615+ User Manual page 25

Wireless n 300 router

Table of Contents

Section 4 - Configuration

Select Dynamic IPv4 to obtain IPv4 address information automatically

from your Internet Service Provider (ISP). Choose Basic configuration or All

Settings.

Basic

MAC address:

The default MAC address is set to the Internet port's physical interface

MAC address on the router. You can edit that address manually here.

Clone MAC

Toggle this switch to clone the MAC address of the device you are

address of your

using to access the web UI. Note that no two MAC address within the

NIC:

same subnet can be the same.

Restore Default

Click here to restore your router's default MAC address.

MAC Address:

Click Apply when you are done.

All Settings

Connection Type:

Select your connection type from drop-down menu:

For Dynamic IPv4 refer to page 21.

For Static IPv4 refer to page 24

For Dynamic IPv6 refer to page 27

For Static IPv6 refer to page 30

For PPPoE refer to page 33

For PPPoE IPv6 refer to page 37

For PPPoE Dual Stack refer to page 42

For PPTP refer to page 47

For L2TP refer to page 51

Note: This option can only be edited in the WAN/Creating mode.

D-Link DIR-615+ User Manual

Dynamic IPv4

Table of Contents