Table of Contents
Advertisement
10. Using the Wi-Fi function
Sending images to AV device
You can send pictures and motion pictures to an AV device (home AV device) that
supports DLNA, such as a recorder.
A Wireless access point
1
Select the menu.
>
[Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
MENU
[Send Images While Recording] or [Send Images Stored in the Camera] >
[AV device]
2
Select [Via Network] or [Direct], and connect.
3
Select a device you want to connect.
4
Check the send settings, and select [Set].
• To change the send setting, press [DISP.].
5
When [Send Images While Recording] has been selected
Take pictures.
When [Send Images Stored in the Camera] has been selected
Select the picture.
• Sending may fail depending on the operational status of the AV device. Also, sending may
take a while.
B Home AV device
(P50)
(P260)
(P261)
(P276)
(P262)
265
Advertisement
Table of Contents
