Page 1 Operating Instructions Digital Camera DC-G100D Model No. Please read these instructions carefully before using this product, and save this manual for future use. DVQP3089ZA M1223KZ0...
Page 2 Dear Customer, We would like to take this opportunity to thank you for purchasing this Panasonic Digital Camera. Please read this document carefully and keep it handy for future reference. Please note that the actual controls and components, menu items, etc.
Page 3: About Operating Instructions
About Operating Instructions ™ Symbols Used in This Document Black icons show conditions in which these can be used, and gray icons show conditions in which these cannot be used. Example: Recording mode Pictures · Videos Operating symbols Front dial Cursor button up/down/left/right [MENU/SET] button Control dial...
Page 4 About Operating Instructions Notification classification symbols To confirm prior to using the function Hints for better use of the camera and tips for recording Notifications and supplementary items regarding specifications Related information and page number • The images and drawings of this document are an illustration to explain the functions.
Page 5: Table Of Contents
Chapters 1. Introduction 2. Getting Started 3. Basic Operations 4. Recording Mode 5. Image Recording 6. Focus/Zoom 7. Drive/Shutter/Image Stabilizer 8. Brightness (Exposure)/Coloring/ Picture effect 9. Flash 10. Recording Videos 11. Playing Back and Editing of Images 12. Camera Customization 13.
Page 6 Contents About Operating Instructions ............. 3 Chapters ..................5 Contents by Function ............... 16 1. Introduction Before Use ................20 Standard Accessories .............. 22 Lenses That Can Be Used ............23 Memory Cards That Can Be Used ........... 24 Names of Parts ................ 26 Camera ....................
Page 7 Contents 3. Basic Operations Basic Recording Operations ............ 50 How to Hold the Camera ..............50 Taking Pictures ................. 52 Recording Videos ................53 Selecting the Recording Mode ............54 Camera Setting Operations ............. 55 Display Settings ............... 57 Adjusting the Viewfinder Diopter ............57 Switching Between the Monitor and Viewfinder .......
Page 8 Contents 4. Recording mode Intelligent Auto Mode ............... 76 [Intelligent Auto] menu ..............81 Taking pictures with different color tones, degrees of blurriness, and brightness ................. 83 Self Shot Mode ([Self Shot]) ............ 85 Built-in microphone setting ([Self Shot]) ........... 88 4K Selfie ...................
Page 9 Contents 6. Focus/Zoom Selecting the Focus Mode ............. 126 Using AF ................128 [AF Sensitivity(Photo)] ..............130 Selecting the AF Mode ............131 [Face/Eye Detection] ..............133 [Tracking] ..................135 [49-Area] ..................137 Custom Multi (Horizontal, Vertical, Center) ........138 Custom Multi (C1 to C3) ..............
Page 10 Contents 7. Drive/Shutter/Image Stabilizer Selecting the Drive Mode ............159 Taking Burst Pictures ............. 160 4K Photo Recording ............... 164 Selecting Pictures from a 4K Burst File ......... 170 Picture Selection Operations ............172 Post-Focus Recording ............178 Selecting the Focus Point for the Picture to Save ......181 Focus Stacking ................
Page 11 Contents 8. Brightness (Exposure)/Coloring/Picture effect [Metering Mode] ..............209 Exposure Compensation............210 Locking Focus and Exposure (AF/AE Lock) ......212 ISO Sensitivity................ 214 White Balance (WB)............... 217 Adjusting the White Balance ............221 [Photo Style]................223 [Filter Settings] ............... 226 [Simultaneous Record w/o Filter] ...........
Page 12 Contents 10. Recording Videos Recording Videos ..............240 Taking pictures while a video is being recorded ......244 Creative Video Mode ............. 246 [4K Live Cropping] ................. 249 Slow & Quick Mode..............252 Slow & Quick Menu ................ 255 Snap Movies ................257 Video Settings (Auto Focus) ..........
Page 13 Contents 11. Playing Back and Editing of Images Playing Back Pictures ............272 Playing Back Videos .............. 274 Extracting a Picture ................ 276 Switching the Display Mode ........... 277 Enlarged Display ................277 Thumbnail Screen ................278 Calendar Playback ................. 279 Group Images ................
Page 14 Contents 13. Menu Guide List of Menu ................310 Menus displayed in specific recording modes ....... 314 [Intelligent Auto] menu ..............314 [Creative Video] menu ..............314 [Slow & Quick] menu ..............315 [Scene Guide] menu ..............315 [Creative Control] menu ..............315 [Rec] Menu................
Page 15 Contents 16. Materials Using Optional Accessories ........... 437 External Flash (Optional) ............... 437 External Microphones (Optional) ........... 438 AC Adaptor (Optional)/DC Coupler (Optional) ....... 441 Monitor/Viewfinder Displays ........... 442 Recording Screen ................442 Playback Screen ................447 Message Displays ..............450 Troubleshooting ..............
Page 16: Contents By Function
Contents by Function Power Source Display Charging Recording screen 31 442 Charging error Playback screen 34 447 Battery indication Monitor/Viewfinder 35 29 442 Power save function 37 Monitor recording 65 Number of pictures that 474 information screen 446 can be taken, available recording time Switching display 60...
Page 17 Contents by Function Image Stabilizer Taking Pictures [Stabilizer] Self Shot Mode 206 85 [E-Stabilization (Video)] Recording mode 207 54 Quick menu 63 Drive Zoom 153 Drive mode 159 Extended Tele Conversion 154 [Burst] 160 ([Rec]) [4K PHOTO] Bracket recording 164 197 [Post Focus] Time recording...
Page 18 Contents by Function Video Recording Playback Video recording [Auto Review] 240 342 Taking pictures while a Playing back pictures 244 272 video is being recorded Playing back videos 274 [Vertical Position Info 352 Thumbnail display 278 (Video)] Calendar display 279 [Ex.
Page 19 Contents by Function Connecting with Other Devices Sending images (PC) 431 Viewing on a TV 427 HDMI output 426 430 Wi-Fi/Bluetooth Bluetooth connection 379 Wi-Fi connection 384 417 [Wi-Fi Setup] 425 Smartphone app “LUMIX 377 Sync” [Remote shooting] 391 Location information 399 Sending images 395...
Page 20: Introduction
• For the latest information on the firmware or to download/update the firmware, visit the following support site: https://panasonic.jp/support/global/cs/dsc/ (English only) • To check the firmware version of the camera/lens, attach the lens to the camera and select [Version Disp.] in the [Setup] menu.
Page 21 1. Introduction ™ Condensation (When the Lens, the Viewfinder or Monitor is Fogged Up) • Condensation occurs when there are temperature or humidity differences. Take care as this may lead to soiling, mold, and malfunctions in the lens, viewfinder, and monitor.
Page 22: Standard Accessories
1. Introduction Standard Accessories Check that all the accessories are supplied before using the camera. • The accessories and their shape will differ depending on the country or area where the camera was purchased. For details on the accessories, refer to “Operating Instructions <Basic>” (supplied). •...
Page 23: Lenses That Can Be Used
Depending on the lens used, certain functions, such as Auto Focus, Image Stabilizer, and zoom functions, may be disabled or operate differently. • Refer to catalogs/websites for information regarding supported lenses. https://panasonic.jp/support/global/cs/dsc/connect/index.html (English only) • The focal length noted on the Micro Four Thirds lens is equivalent to double when converted to the 35 mm film camera.
Page 24: Memory Cards That Can Be Used
1. Introduction Memory Cards That Can Be Used You can use the following memory cards with this camera. • SD memory card, SDHC memory card, and SDXC memory card are referred to by the generic name of card in this document. SD memory card/ The camera supports SDHC/SDXC memory cards SDHC memory card/...
Page 25 1. Introduction • You can prevent the writing and deleting of data by setting the write-protect switch on the card to “LOCK”. • The data stored on a card may be damaged due to electromagnetic waves, static electricity or a failure of the camera or card.
Page 26: Names Of Parts
1. Introduction Names of Parts Camera 11 12 13 14 1 23 22 21 20 19 18 17 Shoulder strap eyelet (30) Hot shoe (hot shoe cover) (437) • Keep the hot shoe cover out ] (Exposure compensation) of reach of children to prevent button (210)/ swallowing.
Page 27 Release lever (31, 39) Eye sensor (58) DC Coupler cover (441) • When using an AC adaptor, Cursor buttons (56) ensure that the Panasonic DC ] (ISO sensitivity) ( Coupler (DMW-DCC11: optional) (214) and AC Adaptor (DMW-AC10: ] (White balance) ( ) (217)
Page 28: Lens
1. Introduction Lens H-FS12032 Lens surface Tele Zoom ring (153) Wide Contact point Lens fitting mark (41) Focus ring (148) H-FS45150...
Page 29: Tripod Grip
1. Introduction Tripod grip Camera screw Camera stand Fastening knob Hand strap eyelet Video rec. button Shutter button Sleep button Grip Connection cable • For information on how to attach the camera and operate the tripod grip, refer to page 72. Monitor Displays At the time of purchase, the monitor displays the following icons.
Page 30: Getting Started
Getting Started Attaching a Shoulder Strap Attach a shoulder strap to the camera with the following procedure to prevent it from dropping. • Pull the shoulder strap and check that it will not come out. • Attach the opposite end of the shoulder strap with the same procedure. •...
Page 31: Charging The Battery
• Check that this unit is turned off. Battery Insertion • Always use genuine Panasonic batteries (DMW-BLG10). • If you use other batteries, we cannot guarantee the quality of this product. Make sure to insert the battery in the correct orientation.
Page 32 2. Getting Started ™ Removing the Battery Push the lever in the direction of the arrow. • Remove the battery after use. (The battery will drain if left inserted in the camera for a long period of time.) • To remove the battery, turn the camera off and wait until the LUMIX indicator on the screen goes off.
Page 33: Charging Battery
2. Getting Started Charging battery Charging time Approx. 180 min. • Using the camera body and the supplied AC adaptor. • The indicated charging time is for when the battery has been discharged completely. The charging time may vary depending on how the battery has been used. The charging time for the battery in hot/cold environments or a battery that has not been used for a long time may be longer than normal.
Page 34 2. Getting Started ™ Charging lamp indications Charging lamp (Red) On: Charging in progress Off: Charging complete Flashing: Charging error • You can also charge the battery by connecting a USB device (PC, etc.) and the camera with the USB connection cable. In that case, charging may take a while.
Page 35: Notifications Regarding Charging
2. Getting Started Notifications Regarding Charging ™ Power Indications 75% or higher 74% to 50% 49% to 25% 24% or below Low battery Blinking in • Charge or replace the battery. • The battery level indicated on the screen is approximate.
Page 36 2. Getting Started • To ensure that safe products are used, we recommend that a genuine Panasonic battery pack is used. There is a possibility that other battery packs may lead to fire or explosion. Please be advised that we are not liable for any accident or failure occurring as a result of use of a counterfeit battery pack.
Page 37: [Economy]
2. Getting Started [Economy] This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time. Reduces battery consumption. Select [Economy] [Sleep Mode] Sets the amount of time until the camera is put to sleep. Sets the camera to sleep 15 minutes after being [Sleep Mode(Wi-Fi)] disconnected from Wi-Fi.
Page 38 2. Getting Started • [Economy] is not available in the following cases: – While connected to a PC – During video recording/video playback – When recording with [4K Pre-Burst] – During a [Time Lapse Shot] – When recording with [Stop Motion Animation] (when [Auto Shooting] is set) –...
Page 39: Inserting Cards (Optional)
2. Getting Started Inserting Cards (Optional) • Make sure that the camera is turned off. Do not touch the card connection contacts. ™ Card Access Indications The access indication displays red while the card is being accessed. ™ Removing a Card Push the card until it clicks and then pull the card out straight.
Page 40: Formatting Cards (Initialization)
2. Getting Started • To remove the card, turn the camera off and wait until the LUMIX indicator on the screen goes off. (Failure to wait may cause the camera to malfunction and may damage the card or recorded data.) •...
Page 41: Attaching A Lens
2. Getting Started Attaching a Lens • Make sure that the camera is turned off. • Change the lens in a location where there is not a lot of dirt and dust. If dirt or dust gets on the lens, refer to page 465. •...
Page 42 2. Getting Started ™ Removing a Lens Set the camera on/off switch to [OFF]. While pressing the lens release button rotate the lens in the direction of the arrow until it stops and then remove it. • After removing the lens, be sure to attach the body cap and the lens rear cap.
Page 43: Extending/Retracting The Lens
2. Getting Started Extending/retracting the lens <when the interchangeable lens (H-FS12032) is attached> ™ How to Extend the Lens Rotate the zoom ring in the direction of arrow from position (the lens is retracted) to position <12 mm to 32 mm> to extend the lens. •...

Page 44: Attaching The Lens Hood
2. Getting Started Attaching the Lens Hood When recording into strong backlight, irregular reflection may occur within the lens. The lens hood reduces the inclusion of unwanted light in the recorded images and lowers the drop in contrast. The lens hood cuts off excess lighting and improves the picture quality.
Page 45 2. Getting Started ™ Removing the lens hood Turn the lens hood in the direction of the arrow to detach it. ™ Temporarily Storing the Lens Hood Turn the lens hood in the direction of the arrow to detach it. Align the mark ) on the lens hood with the mark on the tip of the lens.
Page 46: Adjusting The Monitor Direction And Angle
2. Getting Started Adjusting the Monitor Direction and Angle At the time of purchase, the monitor is stowed in the camera body. Turn the monitor surface out before use. 180° 180° ™ Free angle shooting You can rotate 180° towards the lens and 90° downwards. Taking pictures at a low angle Taking pictures at a high angle ™...
Page 47: Setting The Clock (When Turning On For The First Time)
2. Getting Started Setting the Clock (When Turning On for the First Time) When you turn the camera on for the first time, a screen to set the clock and home area appears. Be sure to set these settings before use to ensure images are recorded with the correct date and time information.
Page 48 2. Getting Started Confirm your selection. ● Press When [The clock setting has been completed.] appears, press When [Please set the home area] is displayed, press Set the home area. ● Press to select your home area and press • If you are using Daylight Savings ], press .
Page 49 2. Getting Started • If the camera is used without setting the clock, it will be set to 0:00, 1st January, 2020. • Clock settings are maintained for approx. 3 months using the built-in clock battery even without the battery. (Leave the fully-charged battery in the camera for approx.
Page 50: Basic Operations
Basic Operations Basic Recording Operations How to Hold the Camera To minimize camera shake, hold the camera so that it will not move during recording. Hold the camera with both hands, keep your arms still at your side, and stand with your feet shoulder width apart. ●...
Page 51 3. Basic Operations ™ Vertical Orientation Detection Function This function detects when pictures were recorded with the camera held vertically orientated. With the default settings, pictures are automatically played back vertically oriented. (372) • When the camera is tilted significantly up or down, the vertical orientation detection function may not work correctly.
Page 52: Taking Pictures
3. Basic Operations Taking Pictures Adjust the focus. ● Press the shutter button halfway (press it gently). ● The aperture value and shutter speed are displayed. (If the aperture value and shutter speed are shown in red and flashing, you do not have the appropriate exposure, unless you are using the flash.) ●...
Page 53: Recording Videos
3. Basic Operations • Recorded pictures can be displayed automatically by setting [Auto Review] of the [Custom] ([Monitor / Display]) menu. You can also change the picture display duration to your preferred setting. (342) • With the default settings, you cannot take a picture until the subject is brought into focus.
Page 54: Selecting The Recording Mode
3. Basic Operations Selecting the Recording Mode Rotate the mode dial. Intelligent Auto mode (76) Intelligent Auto Plus mode (79) Program AE mode (93) Aperture-Priority AE mode (95) Shutter-Priority AE mode (98) Manual Exposure mode (100) Creative Video mode (246) Slow &...
Page 55: Camera Setting Operations
3. Basic Operations Camera Setting Operations When changing the camera settings, operate the camera using the following operation parts. Front dial (55) Control dial (55) Cursor buttons (56) [MENU/SET] button (56) Touch screen (56) ™ Front Dial ( )/Control Dial ( Rotate: Selects an item or numeric value.
Page 56 3. Basic Operations ™ Cursor Buttons ( Press: Selects an item or numeric value. ™ [MENU/SET] Button ( Press: Confirms a setting. ™ Touch Screen Operations can be performed by touching the icons, slide bars, menus, and other items displayed on the screen. Touch Operation of touching and then lifting your finger from the touch screen.
Page 57: Display Settings
3. Basic Operations Display Settings Adjusting the Viewfinder Diopter Rotate the diopter adjustment dial while looking through the viewfinder. • Adjust until you can clearly see the text on the viewfinder.
Page 58: Switching Between The Monitor And Viewfinder
3. Basic Operations Switching Between the Monitor and Viewfinder With the default settings, automatic viewfinder/monitor switching is set. When you look through the viewfinder, the eye sensor works and the camera switches from monitor display to viewfinder display. You can switch to viewfinder display or monitor display with [LVF] Press [LVF].
Page 59 3. Basic Operations • If [LVF Display Speed] is set to [ECO 30fps] when the viewfinder is used, the camera can be operated for a longer period since battery drainage is reduced. • In Self Shot Mode, the display automatically switches to monitor display, and the [LVF] and eye sensor are disabled.
Page 60: Switching The Display Information
3. Basic Operations Switching the Display Information You can switch the viewfinder/monitor display method. Press [DISP.]. ● The display information is switched. ™ Recording Screen Monitor Without With information Without information With information information level gauge level gauge Monitor recording Turned off information (black)
Page 61 3. Basic Operations Viewfinder Without With information Without information With information information level gauge level gauge • You can switch the viewfinder/monitor display method: [LVF/Monitor Disp. Set] (347) Using the level gauge The yellow line indicates the current angle. Correct the angle of the camera so that it matches the white line.
Page 62 3. Basic Operations ™ Playback Screen Detailed Display without Without With information information blinking information display * highlights * 2020.12.1 10:00 100-0001 1 Pressing switches the display information. (449) 2 This is a screen without blinking highlights display that is shown when [Highlight] of the [Custom] ([Monitor / Display]) is set to [ON].
Page 63: Quick Menu
3. Basic Operations Quick Menu This menu enables you to quickly set functions that are frequently used during recording without calling up the menu screen. You can also change the Quick menu display method and the items to display. Display the Quick menu. ●...
Page 64 3. Basic Operations • Some items cannot be set depending on the recording mode or camera settings. • The Quick menu can be customized: [Q.MENU] [CUSTOM] (301)
Page 65: Monitor Recording Information Screen
3. Basic Operations Monitor recording information screen This screen allows you to view the current recording settings on the monitor. • This screen is displayed only when [Monitor Info. Disp.] in the [Custom] ([Monitor / Display]) menu is set to [ON]. Display the monitor recording information screen.
Page 66 3. Basic Operations Steps can also be changed using the following operations. Press [Q.MENU]. Press (or rotate ) to select an item. Rotate to change the settings values. • Some items cannot be set depending on the recording mode or camera settings.
Page 67: Menu Operation Methods
3. Basic Operations Menu Operation Methods In this camera, the menu is used for setting a wide variety of functions and performing camera customizations. Menu operations can be performed using the cursors, dial, or by touch. Display the menu. ● Press Switch the menu type.
Page 68 3. Basic Operations Select a setting item and then confirm your selection. ● Press to select a setting item and then press ● You can also perform the same operation by rotating to select the setting item and then pressing Close the menu.
Page 69: [Reset]
3. Basic Operations ™ Grayed Out Menu Items Menu items that cannot be set are displayed grayed out. In some setting conditions, the reason the setting is disabled is displayed when you press if you select a grayed-out item. [Reset] Return each of the following settings to the default setting: –...
Page 70: Recording Using Touch Functions
3. Basic Operations Recording Using Touch Functions Touch AF/Touch Shutter Touch functions allow you to focus on the point that you touch, release the shutter, etc. Touch [ Touch the icon. ● The icon switches each time you touch it. Touch AF Focus on the Touched Position.
Page 71: Touch Ae
3. Basic Operations Touch AE This function adjusts the brightness according to a touched position. When a subject’s face appears dark, you can make the screen brighter to match the face. Touch [ Touch [ ● The Touch AE settings screen appears.
Page 72: Recording With The Tripod Grip
• Do not use any other tripod grips except the supplied one or a genuine Panasonic tripod grip (DMW-SHGR2: optional). • After usage, remove the tripod grip from the camera. • Be careful not to get your finger or any other part of your body caught.
Page 73: Attaching The Camera To A Tripod Grip
3. Basic Operations Attaching the camera to a tripod grip • Hold the camera and tripod grip tightly, and securely attach them so that they do not drop. • For removal, perform the steps backwards. Set the Camera on/off switch to [OFF]. Loosen the camera stand.
Page 74: Using As A Grip
3. Basic Operations Using as a grip To prevent dropping, be sure to attach the supplied strap and fit it to your wrist. Close the tripod grip’s legs, put your wrist through the hand strap and grip it. ● Slide adjuster , and secure the hand strap onto your wrist.
Page 75: Using As A Tripod
3. Basic Operations ™ Taking pictures Focus on the subject. • Press the shutter button halfway (press lightly). Take a picture. • Press the shutter button fully (push the button all the way). ™ Recording video Start recording. • Press the video rec. button •...
Page 76: Recording Mode
Recording mode For information about the [ ] mode and [ ] mode, refer to pages and 252, and for the [ ] mode, refer to page 305. Intelligent Auto Mode In the [ ] mode (Intelligent Auto mode), the camera detects the scene to set the optimal recording settings automatically to match the subject and recording conditions.
Page 77 4. Recording mode Start recording. ● Press the shutter button fully. • Backlight compensation operates automatically to prevent subjects from appearing dark when there is a backlight.
Page 78 4. Recording mode ™ Types of Automatic Scene Detection During picture taking During video recording [i-Portrait] [i-Scenery] [i-Macro] [i-Night Portrait] * [i-Night Scenery] [i-Handheld Night Shot] * [i-Food] [i-Baby] * [i-Sunset] [i-Low Light] 1 Displayed only when using flash. 2 Displayed only when [iHandheld Night Shot] is [ON]. 3 Displayed when children (that are registered in the camera with Face Recognition) under 3 years old are recognized.
Page 79 4. Recording mode ™ Intelligent Auto Plus Mode ] allows you to adjust some settings such as the brightness and color tone while also using [ ] for other settings so that you can record pictures more suited to your preferences. ( : Available, –: Not available) Intelligent Auto Plus Intelligent Auto Mode...
Page 80 4. Recording mode ™ [AF Mode] [AF Mode] is automatically set to [ ] ([Face/Eye Detection]). • If you touch the subject, the camera switches to [ ] ([Tracking]) and the AF tracking function starts operating. – The AF tracking function will also work if you press [ ) and then press the shutter button halfway.
Page 81: [Intelligent Auto] Menu
4. Recording mode [Intelligent Auto] menu ™ [iHandheld Night Shot] If a night scene is detected automatically while the unit is being handheld, [iHandheld Night Shot] can record a still picture with less jitter and less noise without using a tripod by combining a burst of pictures. Select [iHandheld Night Shot] Settings: [ON]/[OFF] •...
Page 82 4. Recording mode • The angle of view becomes slightly narrow. • After the shutter button has been pressed, do not move the camera during the burst operation. • This function will not work for still pictures while video is being recorded. •...
Page 83: Taking Pictures With Different Color Tones, Degrees Of Blurriness, And Brightness
4. Recording mode Taking pictures with different color tones, degrees of blurriness, and brightness ™ Setting coloring Press [ ) to display the setting screen. Rotate to adjust color. • Press the shutter button halfway to return to the recording screen. •...
Page 84 4. Recording mode ™ Defocusing the background (Defocus control function) Press [ ], and then press [Fn4]. Rotate to adjust the background defocusing condition. • Press the shutter button halfway to return to the recording screen. • AF Mode is set to [ The position of the AF area can be set by touching the screen.
Page 85: Self Shot Mode ([Self Shot])
4. Recording mode Self Shot Mode ([Self Shot]) You can easily take pictures of yourself while looking at the screen. Rotate the monitor as shown in the figure. ● A mirror image will be displayed on the monitor. ● The touch operation is enabled. ●...
Page 86 4. Recording mode Take the picture. ● For information on how to start taking a picture, refer to [Shutter] (87) • Regardless of the [Shutter] setting, you can start recording by pressing the shutter button or video rec. button. • With the default setting, it will focus automatically after the countdown ends. ([AF After Countdown] (351)) ™...
Page 87 4. Recording mode ] (Shutter button only), [ ] (Touch), ] (Buddy), [ ] (Face) Sets the way the shutter is released. ] (Shutter button only): Push the shutter button to take pictures or the video rec. button to record video. ] (Touch): Focuses on the touched position before taking a picture.
Page 88: Built-In Microphone Setting ([Self Shot])
4. Recording mode ™ Recording self-shot videos with automatically adjusted settings The camera records people well-lit and with clear backgrounds by automatically focusing on them. This is good for recording self-shot videos to upload to social media. Set the mode dial to one of the following. •...
Page 89: 4K Selfie
4. Recording mode Select and touch the sound pickup range. Settings: [AUTO]/[SURROUND]/ [FRONT]/[TRACKING]/ [BACK] • For details, refer to page 267. • This does not work with [Built-in Mic] of the video menu. 4K Selfie You can switch to 4K Photo Mode and take pictures of yourself. Touch [ Select and touch the recording method.
Page 90 4. Recording mode A 4K Photo Mode for taking selfies with an angle of view wider than that of [4K Burst] [4K Burst (Wide- Burst speed: 15 pictures/second angle)] Audio recording: Not available • For information about other types of 4K Photo Mode and the recording methods for 4K Photo Mode, etc., refer to (166) Decide on your poses while looking at the monitor.
Page 91 4. Recording mode • If you set [Self Shot] to [OFF], the mode will not switch to Self Shot Mode even if you rotate the monitor. (351) • Be careful not to look at the light from the flash and the AF Assist Lamp directly.
Page 92 4. Recording mode • When the following functions are being used, a [Background Control] setting of [ ] (Clear) is not available: – Video recording – Any mode for [ ] mode other than [Silky Skin]/[Monochrome] – [ ] mode, [ ] mode, [ ] mode, [ ] mode...
Page 93: Program Ae Mode
4. Recording mode Program AE Mode In [ ] mode (Program AE mode), the camera automatically sets the shutter speed and aperture value for the brightness of the subject. You can also use Program Shift to change combinations of shutter speed and aperture values while keeping the same exposure.
Page 94 4. Recording mode ™ Program Shift You can change the shutter speed and aperture value combination set automatically by the camera while maintaining the same exposure. With this, you can, for example, make the background more defocused by decreasing the aperture value or capture a moving subject more dynamically by slowing the shutter speed.
Page 95: Aperture-Priority Ae Mode
4. Recording mode Aperture-Priority AE Mode In [ ] mode (Aperture-Priority AE mode), you can set the aperture value before recording. The shutter speed will be automatically set by the camera. Smaller aperture values Larger aperture values It becomes easier to defocus the It becomes easier to bring everything background.
Page 96 4. Recording mode Set the aperture value. ● Rotate Start recording. • If the correct exposure is not achieved when the shutter button is pressed halfway, the aperture value and the shutter speed blink red. ™ Depth of Field Characteristics Aperture value Small Large...
Page 97 4. Recording mode • The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview]. (106) • The brightness of the recording screen and of actual recorded images may differ.
Page 98: Shutter-Priority Ae Mode
4. Recording mode Shutter-Priority AE Mode In [ ] mode (Shutter-Priority AE mode), you can set the shutter speed before recording. The aperture value will be automatically set by the camera. Slower shutter speeds Faster shutter speeds It becomes easier to capture motion It becomes easier to freeze motion Set the mode dial to [ ].
Page 99 4. Recording mode Set the shutter speed. ● Rotate Start recording. • If the correct exposure is not achieved when the shutter button is pressed halfway, the aperture value and the shutter speed blink red. • The effects of the set aperture value and shutter speed will not be visible on the recording screen.
Page 100: Manual Exposure Mode
4. Recording mode Manual Exposure Mode In [ ] mode (Manual Exposure mode), you can take pictures by manually setting the aperture value and shutter speed. In default settings, the ISO sensitivity is set to [AUTO]. As a result, the ISO sensitivity will be adjusted according to the aperture value and shutter speed.
Page 101 4. Recording mode ™ Available Shutter Speeds (Sec.) [EFC] [T] (Time, max. approx. 60 seconds), 60 to 1/500 [ESHTR] 1 to 1/16000 • The effects of the set aperture value and shutter speed will not be visible on the recording screen. To check the effects on the recording screen, use [Preview].
Page 102 4. Recording mode ™ [T] (Time) If you set the shutter speed to [T], the shutter stays open when the shutter button is pressed fully. (up to approx. 60 seconds) The shutter closes if you press the shutter button again. Use this when you want to keep the shutter open for a long time to record images of fireworks, night scenery or a starry sky.
Page 103: Live View Composite Recording
4. Recording mode Live View Composite Recording The camera records images at set exposure time intervals, and combines parts with changes in bright light to save the result as one picture. • You can check a combined image at each exposure time interval. •...
Page 104 4. Recording mode Start recording. ● Press the shutter button fully. • Images are combined every time the exposure time set in step has passed. Histogram display. Exposure time per frame × Number of pictures combined. Elapsed time. 5 sec. × 1200 •...
Page 105 4. Recording mode • [Long Shtr NR] is fixed to [ON]. • The flash will only fire on the first frame. • After an image for noise reduction is obtained, some menus are not displayed. • The image for noise reduction will be discarded if the following operations are performed.
Page 106: Preview Mode
4. Recording mode Preview Mode You can check the effects of aperture on the recording screen by physically closing the aperture blades of the lens to the aperture value set for actual recording. In addition to the effects of aperture, you can check the effects of shutter speed at the same time.
Page 107: Scene Guide Mode
4. Recording mode Scene Guide Mode If you select a scene to suit the subject and recording conditions with reference to the example images, the camera will set optimal exposure, color, and focus, allowing you to record in a manner appropriate to the scene.
Page 108 4. Recording mode • It is also possible to display the selection screen by touching the recording mode icon in recording screen. • Depending on the scene, the recording screen may seem as if frames are missed. • To change the scene, select [Scene Switch] in the [Scene Guide] menu, and .
Page 109: Types Of Scene Guide Mode
4. Recording mode Types of Scene Guide Mode 1: [Clear Portrait] Setting [Soft Skin] and [Slimming Mode] You can apply the same [Soft Skin] and [Slimming Mode] settings as those specified for Self Shot Mode. Touch [ ] and select the setting item. Makes people’s faces [Soft Skin] look brighter and their...
Page 110 4. Recording mode 4: [Relaxing Tone] 5: [Sweet Child’s Face] • When you touch the face, a still picture is recorded with the focus and exposure set for the touched location 6: [Distinct Scenery] 7: [Bright Blue Sky] 8: [Romantic Sunset 9: [Vivid Sunset Glow] Glow] 10: [Glistening Water]...
Page 111 4. Recording mode 16: [Handheld Night 17: [Clear Night Portrait] Shot] • Tripod, self-timer • After the shutter button recommended. has been pressed, do • When [Clear Night not move the camera Portrait] is selected, during the burst keep the subject still for operation.
Page 112: Creative Control Mode
4. Recording mode Creative Control Mode You can select the effects to be applied from sample pictures and preview these effects on the screen. Set mode dial to [ Select the filter effect. ● Press to select the filter effect and press •...
Page 113: Types And Adjustments Of Filter Effects
4. Recording mode ™ Creative Control Menu Select [ Allows you to display the selection screen of [Filter Effect] filter effect. Allows you to set the camera to take a picture [Simultaneous Record w/o Filter] with and without a filter effect simultaneously. Types and adjustments of filter effects On the recording screen, press ] ( ).
Page 114 4. Recording mode Picture effect Items that can be set [Expressive] Vividness [Retro] Coloring [Old Days] Contrast [High Key] Coloring [Low Key] Coloring [Sepia] Contrast [Monochrome] Coloring [Dynamic Monochrome] Contrast [Rough Monochrome] Grainy picture effect [Silky Monochrome] Degree of defocusing [Impressive Art] Vividness [High Dynamic]...
Page 115 4. Recording mode ™ Setting the Type of Defocus ([Miniature Effect]) Set Filter effect to [Miniature Effect]. Touch [ ], and then [ Press to move the in-focus portion. • You can also move the in-focus portion by touching the screen. •...
Page 116 4. Recording mode ™ Setting the Color to Be Left ([One Point Color]) Set Filter effect to [One Point Color]. Touch [ ], and then [ Press to move the frame and select the color you want to leave. • You can also select the color you want to leave by touching the screen.
Page 117: Taking Pictures With Different Degrees Of Blurriness And Brightness
4. Recording mode Taking pictures with different degrees of blurriness and brightness ™ Brightness Press [ Rotate to adjust brightness. • Press the shutter button halfway to return to the recording screen. ™ Defocusing the background (Defocus control function) Press [ ], and then [Fn4].
Page 118 4. Recording mode ™ With touch screen operations Touch [ Touch the item you want to set. ]: Adjusting the filter effect ]: Degree of defocusing ]: Brightness Drag the slide bar or exposure meter to set. • Press the shutter button halfway to return to the recording screen.
Page 119: Image Recording
Image Recording [Aspect Ratio] You can select the image aspect ratio. Select [Aspect Ratio] [4:3] Aspect ratio of a 4:3 monitor [3:2] Aspect ratio of a standard film camera [16:9] Aspect ratio of a 16:9 TV [1:1] Square aspect ratio •...
Page 120: [Picture Size]
5. Image Recording [Picture Size] Sets the picture’s image size. Select [Picture Size] [Aspect Ratio] 16:9 [L] 20M [L] 17M [L] 14.5M [L] 14.5M 5184×3888 5184×3456 5184×2920 3888×3888 [M] 10M [M] 9M [M] 8M [M] 7.5M [Picture Size] 3712×2784 3712×2480 3840×2160 2784×2784 [S] 5M...
Page 121: [Quality]
5. Image Recording [Quality] Set the compression rate used for storing pictures. Select [Quality] Setting File format Settings details JPEG images that give priority to image quality. JPEG images of standard image quality. JPEG This is useful for increasing the number of recordable pictures without changing the picture size.
Page 122 5. Image Recording Note on RAW RAW format refers to a data format of images that have not been processed on the camera. Playback and editing of RAW images require the camera or the dedicated software. • You can process RAW images on the camera. (288) •...
Page 123: [Folder / File Settings]
5. Image Recording [Folder / File Settings] Set the folder and file name where to save the images. Folder name File name 100ABCDE PABC0001.JPG Color space Folder number (3 digits, 100 to 999) ([P]: sRGB, [ _ ]: AdobeRGB) 5-character user-defined segment 3-character user-defined segment File number (4 digits, 0001 to 9999) Extension...
Page 124 5. Image Recording • Each folder can store up to 1000 files. • File numbers are assigned sequentially from 0001 to 9999 in the order of recording. If you change the storage folder, a number continuing on from the last file number will be assigned.
Page 125: [No.reset]
5. Image Recording [No.Reset] Refresh the folder number to reset the file number to 0001. Select [No.Reset] • When the folder number reaches 999, the number cannot be reset. We recommend backing up your data and formatting the card. • To reset the folder number to 100: Perform [Format] to format the card.
Page 126: Focus/Zoom
Focus/Zoom Selecting the Focus Mode Select the focusing method (focus mode) to match subject movement. Set the Focus Mode. ● [Focus Mode] This is suitable for recording still subjects. When the shutter button is pressed halfway, the camera focuses [AFS] once.
Page 127 6. Focus/Zoom • In the following cases, [AFF] or [AFC] works the same as [AFS] when the shutter button is pressed halfway: – [ ] mode, [ ] mode – [4K Burst(S/S)] – In low light situations • [AFF] is not available when recording 4K photos. Continuous AF works during recording.
Page 128: Using Af
6. Focus/Zoom Using AF AF (Auto Focus) refers to automatic focusing. Select the focus mode and the AF mode appropriate for the subject and scene. Set the Focus Mode. (126) ● [Focus Mode] [AFS]/[AFF]/[AFC] Select AF mode. ● Press [ ) to display the AF mode selection screen, and set using...
Page 129 6. Focus/Zoom Low illumination AF • In dark environments, low illumination AF automatically operates, and the focus display is indicated as [ • Achieving focus may take more time than usual. Starlight AF • If the camera detects stars in the night sky after determining low illumination AF, then Starlight AF will be activated.
Page 130: [Af Sensitivity(Photo)]
6. Focus/Zoom [AF Sensitivity(Photo)] Sets the tracking sensitivity for the movement of subjects. Set the focus mode to [AFF] or [AFC]. (126) Set [AF Sensitivity(Photo)]. ● [AF Sensitivity(Photo)] When the distance to the subject changes drastically, the camera re-adjusts the focus immediately. You can bring different subjects into focus one after another.
Page 131: Selecting The Af Mode
6. Focus/Zoom Selecting the AF Mode Select the focusing method to match the position and number of subjects. Press [ ] ( ). Select the AF mode. ● Press to select an item and then press ● Selection is also possible by rotating [Face/Eye Detection] 133...
Page 132 6. Focus/Zoom • When the following functions are being used, [ ] is not available: – [Clear Nightscape], [Cool Night Sky], [Warm Glowing Nightscape], [Artistic Nightscape], [Glittering Illuminations], [Handheld Night Shot], [Appetizing Food], [Cute Dessert] ([ ] mode) • When the following functions are being used, [ ] is not available: –...
Page 133: [Face/Eye Detection]
6. Focus/Zoom [Face/Eye Detection] The camera automatically detects the faces and eyes of subjects. When the camera detects a person’s face / , an AF area is displayed. AF area to be brought into Yellow focus. The camera selects this automatically.
Page 134 6. Focus/Zoom ™ Move and Change the Size of the Yellow AF Area Press [ ) to display the AF mode selection screen. Select [ ] and then press Press to move the position of the AF area. Rotate to change the size of the AF area.
Page 135: [Tracking]
6. Focus/Zoom [Tracking] The AF area follows the movement of the subject, maintaining focusing. Start tracking. ● Aim the AF area over the subject, and press the shutter button halfway. • When the subject is recognized, the AF tracking area turns green. When you release the shutter button, the AF tracking area turns yellow and the subject is automatically kept in focus.
Page 136 6. Focus/Zoom ™ Move the Position of the AF Area Press [ ) to display the AF mode selection screen. Select [ ] and then press Press to move the position of the AF area. • You can also move the AF area by touching. •...
Page 137: [49-Area]
6. Focus/Zoom [49-Area] The camera selects the most optimal AF area to focus from 49 areas. When multiple AF areas are selected, all selected AF areas will be brought into focus. ™ Move and Change the Size of the AF Area You can set the focus position by selecting an Examples of group...
Page 138: Custom Multi (Horizontal, Vertical, Center)
6. Focus/Zoom Custom Multi (Horizontal, Vertical, Center) [Horizontal Pattern] Ideal shape for panning, etc. [Vertical Pattern] Ideal shape for recording structures, etc. [Central Pattern] Within the 49 AF areas, a central oval zone can be focused.
Page 139 6. Focus/Zoom ™ Move and Change the Size of the AF Area Press [ ) to display the AF mode selection screen. Select a Custom Multi icon ([ ], etc.), and press Select [ ], [ ] or [ ] and then press Press to move the position of...
Page 140: Custom Multi (C1 To C3)
6. Focus/Zoom Custom Multi (C1 to C3) The shape of the AF area can be set freely in the 49 AF areas. The set AF area can be registered using [ ] to [ Press [ ) to display the AF mode selection screen. Select a Custom Multi icon ([ ] etc.), and press Select one of [...
Page 141: [1-Area]
6. Focus/Zoom [1-Area] Specify the point to be brought into focus. ™ Move and Change the Size of the AF Area Press [ ) to display the AF mode selection screen. Select [ ] and then press Press to move the position of the AF area.
Page 142: [Pinpoint]
6. Focus/Zoom [Pinpoint] You can achieve a more precise focus on a small point. If you press the shutter button halfway, the screen that lets you check the focus will be enlarged. ™ Move the Position of the AF Area Press [ ) to display the AF mode selection screen.
Page 143 6. Focus/Zoom Operations on the Magnification Window Button Touch Description of operation operation operation Touch Moves [+]. Pinch out/ Enlarges/reduces the screen in small steps. pinch in — Enlarges/reduces the screen. Switches magnification window (windowed mode/full screen mode). — First time: Returns to the screen in Step [DISP.] [Reset] Second time: Returns the AF area position to...
Page 144: Moving The Af Area By Touch
6. Focus/Zoom Moving the AF Area by Touch You can move the AF area to a touched position on the monitor. Optimizing the focus and brightness to the touched position Set [Touch AF]. ● [Touch Settings] [Touch AF] This focuses on the touched [AF] subject.
Page 145 6. Focus/Zoom ™ Focus on and Adjust Brightness for the Touched Position ([AF+AE]) Touch the subject to which you wish to adjust the brightness. • At the touched position, an AF area that works in the same way as [ ] is displayed.
Page 146: Moving The Af Area During Viewfinder Display
6. Focus/Zoom Moving the AF Area during Viewfinder Display During viewfinder display, you can touch the monitor to change the position and size of the AF area. Set [Touch Pad AF]. ● [Touch Settings] [Touch Pad AF] [EXACT]/ [OFFSET1] to [OFFSET7] Move the position of the AF area.
Page 147 6. Focus/Zoom ™ Setting Items ([Touch Pad AF]) Moves the AF area of the viewfinder by [EXACT] touching a desired position on the touch pad. Moves the AF area of the viewfinder according to the distance you drag [OFFSET1] your finger on the touch pad.
Page 148: Record Using Manual Focus
6. Focus/Zoom Record Using Manual Focus MF (Manual Focus) refers to manual focusing. Use this function when you want to fix the focus or when the distance between the lens and the subject is determined and you do not want to activate AF.
Page 149 6. Focus/Zoom Confirm your selection. ● Press ● This switches to the MF Assist screen, and shows an enlarged display. Adjust the focus. The operations used to focus differ depending on the lens. When using an interchangeable lens with no focus ring Press : Focuses on nearby subject Press...
Page 150 6. Focus/Zoom • This will display the in-focus portion highlighted with color. (Focus Peaking) • A recording distance guideline is displayed. (MF Guide) MF Assist (enlarged screen) Focus Peaking MF Guide Close the MF Assist screen. ● Press the shutter button halfway. ●...
Page 151 6. Focus/Zoom ™ Operations on the MF Assist Screen Button Touch Description of operation operation operation Drag Moves the enlarged display position. Pinch out/ Enlarges/reduces the screen in small steps. pinch in — Enlarges/reduces the screen. Switches magnification window (windowed mode/full screen mode) * —...
Page 152 6. Focus/Zoom • On the recording screen, you can rotate the focus ring to display the MF Assist screen. If the focus ring has been rotated to enlarge the display, the assist screen will be exited a certain amount of time after you cease the operation.
Page 153: Recording With Zoom
6. Focus/Zoom Recording with Zoom Use the optical zoom of the lens to zoom to telephoto or wide-angle. : Telephoto, Enlarges distant subject : Wide-angle, Widens angle of view Rotate the zoom ring. Interchangeable lens with a zoom ring Move the zoom lever. (The zoom speed varies Interchangeable depending on how far you...
Page 154: Extended Tele Conversion
6. Focus/Zoom Extended Tele Conversion [Ex. Tele Conv.] enables you to take pictures that are further enlarged beyond what is available with the optical zoom, without any deterioration in image quality. ™ [Ex. Tele Conv.] ([Rec]) • The [Ex. Tele Conv.] maximum magnification ratio differs depending on the [Picture Size] and [Aspect Ratio] set in the [Rec] menu.
Page 155 6. Focus/Zoom Changing the Zoom Magnification (Button operation) Set [Ex. Tele Conv.] to [ZOOM]. • [Ex. Tele Conv.] [ZOOM] Set the Fn button to [Zoom Control]. (294) Press the Fn button. Press the cursor buttons to operate the zoom. : T (telephoto) : W (wide-angle) •...
Page 156 6. Focus/Zoom ™ [Ex. Tele Conv.] ([Motion Picture]) Set [Rec Quality] to [FHD] or [HD]. • [Rec Quality] [FHD]/[HD] Set [Ex. Tele Conv.]. • [Ex. Tele Conv.] [ON] Fixes the zoom magnification at the maximum. [OFF] — • If you assign [Ex. Tele Conv.] to [Fn Button Set] in the [Custom] ([Operation]) menu, you can display the Extended Tele Conversion setting screen for both pictures and video by pressing the assigned Fn button.
Page 157: [Digital Zoom]
6. Focus/Zoom [Digital Zoom] You can increase the zoom ratio 2x higher than the original zoom ratio. Note that, with Digital Zoom, enlarging will decrease picture quality. Select [Digital Zoom] Settings: [2x]/[OFF] • When using [Digital Zoom], we recommend using a tripod and the self-timer (186) for taking pictures.
Page 158: Power Zoom Lens
6. Focus/Zoom Power Zoom Lens Sets the screen display and operations when using an interchangeable lens that is compatible with power zoom (electrically operated zoom). • This may only be selected when using a lens that is compatible with power zoom (electrically operated zoom).
Page 159: Drive/Shutter/Image Stabilizer
Drive/Shutter/Image Stabilizer Selecting the Drive Mode You can switch the drive mode to Single, Burst, etc. to match the recording conditions. Press [ ] ( ). Select the drive mode. ● Press to select the drive mode and press • You can also select by rotating Takes one picture each time the shutter button is [Single] pressed.
Page 160: Taking Burst Pictures
7. Drive/Shutter/Image Stabilizer Taking Burst Pictures Takes pictures continuously while the shutter button is pressed and held. Press [ ] ( ). Press to select [Burst] and press . • You can also select by rotating Select the burst rate. ●...
Page 161 20 frames or more Medium speed Low speed • When recording under the test conditions specified by Panasonic. Recording conditions may reduce the maximum number of frames recordable. • The burst rate will become lower during recording but pictures can continue to be...
Page 162 7. Drive/Shutter/Image Stabilizer ™ Number of Pictures That Can Be Taken Continuously When you press the shutter button halfway, the number of pictures that can be taken continuously will appear on the recording screen. Example) When 20 frames: [r20] • Once recording starts, the number of pictures that can be taken continuously will decrease.
Page 163 7. Drive/Shutter/Image Stabilizer ™ Exposure when Taking Burst Pictures Focus mode [M]/[L] Fixed to the exposure of [AFS] the first frame The exposure is adjusted The exposure is adjusted [AFF]/[AFC] for each frame for each frame Fixed to the exposure of [MF] the first frame ™...
Page 164: 4K Photo Recording
7. Drive/Shutter/Image Stabilizer 4K Photo Recording With 4K photo, you can take high-speed burst pictures at 30 frames/ second and save the desired pictures, each made up of approx. 8 million pixels. • Use a UHS Speed Class 3 or higher card when recording. •...
Page 165 7. Drive/Shutter/Image Stabilizer Select [Rec Method]. ● Press to select the recording method and press • You can also select by rotating • The recording method can also be set using [4K PHOTO] in the [Rec] menu. When you wish to capture the best moments of a fast-moving subject Takes burst pictures while the shutter button is ([4K Burst])
Page 166 7. Drive/Shutter/Image Stabilizer Start recording. • [Continuous AF] works and the focus is adjusted continuously during recording with AF. [4K Burst] Press the shutter button halfway. Press the shutter button fully and keep it pressed during recording. Press and hold Recording is performed •...
Page 167 7. Drive/Shutter/Image Stabilizer [4K Pre-Burst] Press the shutter button fully. Approx. 1 second Recording is performed • While the recording screen is displayed, the AF will operate constantly to continue focusing. The exposure is also adjusted continuously, except in [ ] mode.
Page 168 7. Drive/Shutter/Image Stabilizer ™ How To cancel the 4K Photo functions Press [ ), and then select [ ] ([Single]) or [ • When you perform [Light Composition] or [Sequence Composition], we recommend using a tripod or the shutter remote control function (393). •...
Page 169 7. Drive/Shutter/Image Stabilizer • For 4K photo, the menu items below are fixed to the following settings: – [Picture Size]:4K (8M) [4:3]: 3328×2496 [3:2]: 3504×2336 [16:9]: 3840×2160 [1:1]: 2880×2880 – [Shutter Type]: [ESHTR] – [Quality]: [ • With 4K photo recording, the following functions are not available: –...
Page 170: Selecting Pictures From A 4K Burst File
7. Drive/Shutter/Image Stabilizer Selecting Pictures from a 4K Burst File You can select pictures from the 4K burst files and save them. • When continuing to select pictures from the Auto Review after recording 4K photos, start the operation from either Step Select a 4K burst file on the playback screen.
Page 171 7. Drive/Shutter/Image Stabilizer Save the picture. ● Touch [ ● A confirmation screen appears. • The picture is saved in JPEG format. • The recording information (Exif information), such as the shutter speed, aperture, and ISO sensitivity, is also saved with the picture that is saved.
Page 172: Picture Selection Operations
7. Drive/Shutter/Image Stabilizer Picture Selection Operations ™ Picture Selection Slide View Screen Operations Slide bar Picture selection slide view Position of displayed frame Button Touch Description of operation operation operation Selects a frame. Drag/ • To change the frames displayed in the picture selection slide view, select the frame at the left/ right end and then touch [ ] or [ ].
Page 173 7. Drive/Shutter/Image Stabilizer Moves the enlarged display position (during Drag enlarged display). — Switches a marker to be displayed. [Fn1] Displays the 4K burst playback screen. — Switches to marker operation. — Adds or deletes a marker (white marker). Displays the in-focus portion highlighted with color ([Peaking]).
Page 174 7. Drive/Shutter/Image Stabilizer ™ 4K burst playback screen While paused During continuous playback Button Touch Description of operation operation operation Performs continuous playback or pauses (during continuous playback). Performs continuous rewind playback or pauses (during continuous rewind playback). Performs fast-forward playback or performs frame-by-frame forwarding (while paused).
Page 175 7. Drive/Shutter/Image Stabilizer — Adds or deletes a marker (white marker). Displays the in-focus portion highlighted with color ([Peaking]). — • Switches in order of [ ] → ] ([LOW]) → [ ] ([HIGH]). Saves the picture (while paused). • During marker operation, you can skip to set markers or the beginning or end of the 4K burst file.
Page 176 7. Drive/Shutter/Image Stabilizer ™ Auto Marking function The camera automatically sets markers on scenes in which a face or the movement of a subject is detected. (Green marker) (Example: At the scene when a vehicle passes by, a balloon bursts, or a person turns around) •...
Page 177 7. Drive/Shutter/Image Stabilizer ™ [4K PHOTO Bulk Saving] You can save any 5 second period of pictures from a 4K burst file all at once. Select [4K PHOTO Bulk Saving]. • [4K PHOTO Bulk Saving] Press to select a 4K burst file and then press •...
Page 178: Post-Focus Recording
7. Drive/Shutter/Image Stabilizer Post-Focus Recording Taking burst pictures with the same image quality as 4K photos while automatically changing the focus point. You can select the focus point for the picture to save after recording. Also Focus Stacking lets you combine images with multiple focus points. This function is suitable for subjects that do not move.
Page 179 7. Drive/Shutter/Image Stabilizer Press to select [Post Focus] and press • You can also select by rotating Decide on the composition and then adjust the focus. ● Press the shutter button halfway. ● AF detects the focus point on the screen.
Page 180 7. Drive/Shutter/Image Stabilizer • Recording is performed while automatically changing the focus point. When the icon disappears, recording ends automatically. • Audio will not be recorded. • In default settings, Auto Review operates, and a screen that lets you select the focus point will be displayed.
Page 181: Selecting The Focus Point For The Picture To Save
7. Drive/Shutter/Image Stabilizer Selecting the Focus Point for the Picture to Save Select a Post-Focus image on the playback screen. (272) ● Select an image with the [ icon and then press ● You can also perform the same operation by touching the [ icon.
Page 182 7. Drive/Shutter/Image Stabilizer ™ Focus Point Selection Operations Button Touch Description of operation operation operation Selects a focus position. Touch • Selection is not possible during enlarged display. Enlarges the display. • During enlarged display, you can fine-adjust the focus by dragging the slide bar. (You can also perform the same operation by pressing Reduces the display (during enlarged display).
Page 183: Focus Stacking
7. Drive/Shutter/Image Stabilizer Focus Stacking By merging multiple focus points, you can save pictures that are focused from the foreground through to the background. Focus Focus: closer Focus: more distant On the screen for selecting the focus point in Step page 181, touch [ ●...
Page 184 7. Drive/Shutter/Image Stabilizer (When [Range Merging] is Set/Cancel Set/Cancel selected) Touch the focus points. • Select at least two points. Selected points are indicated with a green frame. Reset Reset • The in-focus range between the two selected points is displayed in green. •...
Page 185 7. Drive/Shutter/Image Stabilizer ™ Operations when [Range Merging] Is Selected Button Touch Description of operation operation operation Touch Selects a point. [Fn1] [Set/Cancel] Sets or cancels a point. Selects all points. [All] (Before selecting points) [DISP.] Cancels all selections. [Reset] (After selecting points) Merges the pictures and saves the resulting picture.
Page 186: Recording Using The Self-Timer
7. Drive/Shutter/Image Stabilizer Recording Using the Self-timer Press [ ] ( ). Press to select [Self Timer] and press . • You can also select by rotating Set the Self-Timer time. ● Press to select the Self-Timer time and press •...
Page 187 7. Drive/Shutter/Image Stabilizer Start recording. ● Press the shutter button or video rec. button • The self-timer light blinks and then the shutter is released. ™ Setting item (Self-timer) Takes a picture after 10 seconds. Takes 3 pictures at approx. 2 second intervals after 10 seconds. (When recording video, it will be the same operation with [ Takes a picture after 2 seconds.
Page 188 7. Drive/Shutter/Image Stabilizer ™ How To Cancel [Self Timer] Press [ ), and then select [ ] ([Single]) or [ • We recommend using a tripod when recording with the self-timer. • When the following functions are being used, [ ] is not available: –...
Page 189: Recording With Time Lapse Shot
7. Drive/Shutter/Image Stabilizer Recording with Time Lapse Shot Pictures are taken automatically at a set recording interval. This feature is ideal for keeping track of changes over time in subjects such as animals and plants. The pictures taken will be saved as a set of group images that can also be combined into a video.
Page 190 7. Drive/Shutter/Image Stabilizer Press to select [Start] and press Focus on the subject and take a picture. • The recording starts by fully-pressing the shutter button. • When [Start Time Set] is set, the camera will enter into sleep status until the start time is reached.
Page 191 7. Drive/Shutter/Image Stabilizer ™ Operations during Time Lapse Shot Recording Pressing the shutter button halfway during sleep status will turn on the camera. • You can perform the following operations by pressing [Fn2] during Time Lapse Shot recording. [Continue] Returns to the recording. (Only during recording) [Pause] Pauses the recording.
Page 192: Recording With Stop Motion Animation
7. Drive/Shutter/Image Stabilizer Recording with Stop Motion Animation Take pictures while moving the subject little by little. The pictures taken will be saved as a set of group images that can be combined into a stop motion video. Set the camera to [Stop Motion Animation].
Page 193 7. Drive/Shutter/Image Stabilizer Focus on the subject and take a picture. ● Take pictures repeatedly while moving the subject little by little. • The recording screen displays up to two pictures taken previously. Use them as reference for the amount of movement. •...
Page 194 7. Drive/Shutter/Image Stabilizer • When you select [Additional] in step , group pictures recorded using [Stop Motion Animation] are displayed. Select an image and proceed to Step • Up to 9999 frames can be recorded. • If the camera is turned off while recording, a message for resuming the recording is displayed when it is turned on.
Page 195: Time Lapse Shot/Stop Motion Animation Videos
7. Drive/Shutter/Image Stabilizer Time Lapse Shot/Stop Motion Animation Videos After performing Time Lapse Shot or Stop Motion Animation recording, you can proceed to create a video. • Refer to the sections below about these recording functions. – Time Lapse Shot recording: 189 –...
Page 196 7. Drive/Shutter/Image Stabilizer • Videos cannot be created if the recording time exceeds 29 minutes and 59 seconds. • In the following cases, videos cannot be created if the file size exceeds 4 GB: – When an SDHC memory card is being used and a 4K [Rec Quality] is set –...
Page 197: Bracket Recording
7. Drive/Shutter/Image Stabilizer Bracket Recording When the shutter button is pressed, the camera can record multiple images while automatically changing the setting value for exposure, aperture, focus or white balance. • Aperture Bracket can be selected in the following modes: –...
Page 198 7. Drive/Shutter/Image Stabilizer ™ Setting Items ([Bracket Type]) When the shutter button is pressed, the camera records Exposure Bracket while changing the exposure. (200) When the shutter button is pressed, the camera records Aperture Bracket while changing the aperture value. (200) When the shutter button is pressed, the camera records Focus Bracket while changing the focus point.
Page 199 7. Drive/Shutter/Image Stabilizer • Bracket recording is not available while you are using the following functions: – Self Shot Mode – [Glistening Water], [Glittering Illuminations], [Handheld Night Shot], [Soft Image of a Flower] ([ ] mode) – [Rough Monochrome], [Silky Monochrome], [Miniature Effect], [Soft Focus], [Star Filter], [Sunshine] ([ ] mode) –...
Page 200 7. Drive/Shutter/Image Stabilizer ™ [More Settings] (Exposure Bracket) Sets the image count and exposure compensation step. [Step] [3•1/3] (record 3 images in 1/3 EV steps) to [7•1] (record 7 images in 1 EV steps) [Sequence] Sets the order in which images are recorded. ]: Takes only one image each time the shutter button is pressed.
Page 201 7. Drive/Shutter/Image Stabilizer ™ [More Settings] (Focus Bracket) Sets the focus adjustment step. [Step] • The distance that the focus point is moved becomes shorter if the initial focus point is close, and longer if it is far away. Sets the image count. [Image Count] •...
Page 202 7. Drive/Shutter/Image Stabilizer ™ [More Settings] (White Balance Bracket) Rotate to set the correction step and then press Horizontal direction: [A] - [B] Vertical direction: [G] - [M] • The correction step can also be set by touching [...
Page 203: [Silent Mode]
7. Drive/Shutter/Image Stabilizer [Silent Mode] This disables all operation sounds and light output at once. The audio from the speaker will be muted and the flash and the AF assist light will be set to forced off mode. • The following settings are fixed: –...
Page 204: [Shutter Type]
7. Drive/Shutter/Image Stabilizer [Shutter Type] Selects the shutter type to use for taking pictures. Select [Shutter Type] Switches the shutter type automatically depending on the [AUTO] recording conditions and shutter speed. [EFC] Records with the electronic front curtain type. [ESHTR] Records with the electronic shutter type.
Page 205 7. Drive/Shutter/Image Stabilizer • When [ ] is displayed on the screen, recording will be with the electronic shutter type. • When a moving subject is recorded using the electronic shutter, the subject may appear distorted in the picture. • When you record using the electronic shutter under lighting such as fluorescent or LED lighting, horizontal stripes may be recorded.
Page 206: Image Stabilizer
7. Drive/Shutter/Image Stabilizer Image Stabilizer The camera detects jitter during recording and automatically corrects it, so you can record images with reduced jitter. • When using a lens with an O.I.S. switch, set the switch on the lens to ON. •...
Page 207: Image Stabilizer Settings
• If the recording screen icon is not indicated with [ ] or ] even when Panasonic interchangeable lens that supports Dual I.S.2 is being used, update the lens firmware to the latest version. For the latest information on supported lenses or to download their firmware, refer to our support site.
Page 208 7. Drive/Shutter/Image Stabilizer • When the shutter button is pressed halfway, the camera shake alert icon ] may be displayed on the recording screen. If this is displayed, we recommend using a tripod, the self timer or the shutter remote control function (393). •...
Page 209: Brightness (Exposure)/Coloring/Picture Effect
Brightness (Exposure)/ Coloring/Picture effect [Metering Mode] Type of optical measurement to measure brightness can be changed. Select [Metering Mode] Method in which the most suitable exposure is measured Multi-metering by judging the allocation of brightness on the whole screen. Method used to perform measuring which focuses on the Center-weighted center of the screen.
Page 210: Exposure Compensation
8. Brightness (Exposure)/Coloring/Picture effect Exposure Compensation You can compensate the exposure when the correct exposure determined by the camera is too bright or too dark. You can adjust the exposure in 1/3 EV steps in a range of ±5 EV. When recording videos or recording with 4K photo or Post-Focus, the range changes to ±3 EV.
Page 211 8. Brightness (Exposure)/Coloring/Picture effect • In [ ] mode, you can compensate the exposure by setting the ISO sensitivity to [AUTO]. • When the exposure compensation value falls below or exceeds ±3 EV, the brightness of the recording screen will no longer change. Press the shutter button halfway or use AE Lock to reflect the value on the recording screen.
Page 212: Locking Focus And Exposure (Af/Ae Lock)
8. Brightness (Exposure)/Coloring/Picture effect Locking Focus and Exposure (AF/AE Lock) Lock the focus and exposure in advance to take pictures with the same focus and exposure settings while changing the composition. This is useful when you want to bring an edge of the screen into focus or there is a backlight, for example.
Page 213 8. Brightness (Exposure)/Coloring/Picture effect ™ Setting the function of [AF/AE LOCK] Select [AF/AE Lock] [AE LOCK] The exposure is locked. [AF LOCK] The focus is locked. [AF/AE LOCK] Both focus and exposure are locked. [AF-ON] Auto Focus is activated. • Program Shift can be set even when AE is locked. •...
Page 214: Iso Sensitivity
8. Brightness (Exposure)/Coloring/Picture effect ISO Sensitivity You can set light sensitivity (ISO sensitivity). With the default settings, you can set 200 to 25600 in 1/3 EV increments. Press [ ] ( ). Select ISO sensitivity. ● Rotate Confirm your selection. ●...
Page 215 8. Brightness (Exposure)/Coloring/Picture effect ™ Setting Items (ISO Sensitivity) ISO sensitivity is automatically set in a range up to 3200 [AUTO] depending on the brightness of a subject. ISO sensitivity is automatically set in a range up to 3200 depending on the movement and brightness of a subject. •...
Page 216 8. Brightness (Exposure)/Coloring/Picture effect • During video recording, the camera operates as [AUTO] (for video). (When not in [ ] / [ ] mode) • You can set upper and lower limits for ISO Auto: [ISO Sensitivity (photo)] (321) [ISO Sensitivity (video)] (264) •...
Page 217: White Balance (Wb)
8. Brightness (Exposure)/Coloring/Picture effect White Balance (WB) White balance (WB) is a function that corrects the color cast produced by the light illuminating the subject. It corrects the colors so that white objects appear in white to make the overall color closer to what is seen by the eye. Normally, you can use auto ([AWB], [AWBc] or [AWBw]) to obtain the optimal white balance.
Page 218 8. Brightness (Exposure)/Coloring/Picture effect Confirm your selection. ● Press the shutter button halfway. ™ Setting Items (White Balance) [AWB] Auto Auto (Reduces the reddish hue under an incandescent light [AWBc] source) Auto (Leaves the reddish hue under an incandescent light [AWBw] source) Clear sky...
Page 219 8. Brightness (Exposure)/Coloring/Picture effect [AWB] will work within this range. Blue sky Cloudy sky (Rain) Shade Sunlight White fluorescent light Incandescent light bulb Sunrise and sunset Candlelight K=Kelvin Color Temperature • Under lighting such as fluorescent or LED lighting, the appropriate white balance will vary depending on the lighting type.
Page 220 8. Brightness (Exposure)/Coloring/Picture effect ™ Registering the White Set ([ ] to [ Take pictures of a white object under the light source of the recording location to adjust the white balance until it appears white. Press [ ) and then select any value from [ ] to [ Press Aim the camera at a white object so that it appears inside the frame at...
Page 221: Adjusting The White Balance
8. Brightness (Exposure)/Coloring/Picture effect Adjusting the White Balance You can adjust the coloring even when the coloring you want to apply is not produced by the selected white balance. Press [ ] ( ). Select the white balance and then press . ●...
Page 222 8. Brightness (Exposure)/Coloring/Picture effect Confirm your selection. ● Press the shutter button halfway. • When the white balance is adjusted, the color of its recording screen icon changes to the adjusted color. Adjusting toward the [G] side will display [+], while adjusting toward the [M] side will display [–].
Page 223: [Photo Style]
8. Brightness (Exposure)/Coloring/Picture effect [Photo Style] You can select the finishing settings of images to suit your subjects and expression styles. The image quality can be adjusted for each Photo Style. Select [Photo Style] [Standard] The standard setting. A setting that produces a more vivid quality with [Vivid] higher saturation and contrast.
Page 224 8. Brightness (Exposure)/Coloring/Picture effect • In [ ] mode, operation differs from that in other recording modes. – [Standard] or [Monochrome] can be set. – The setting will be reset to [Standard] when the camera is switched to another recording mode or it is turned off. –...
Page 225 8. Brightness (Exposure)/Coloring/Picture effect Enhances the contrast. (Effect: weak) [Yellow] Records the sky with a clear blue. Enhances the contrast. (Effect: medium) [Orange] Records the sky with a darker blue. Enhances the contrast. (Effect: strong) [Red] [Filter Effect] * Records the sky with a much darker blue. Skin and lips of people appear in natural tones.
Page 226: [Filter Settings]
8. Brightness (Exposure)/Coloring/Picture effect [Filter Settings] This mode records with additional image effects (filters) just like in the ] mode. (113) You can adjust the effect for each filter. In addition, you can simultaneously take pictures without effects. [Filter Settings] Select [Filter Effect] Settings: [ON]/[OFF]/[SET] ™...
Page 227: [Simultaneous Record W/O Filter]
8. Brightness (Exposure)/Coloring/Picture effect [Simultaneous Record w/o Filter] You can simultaneously take pictures with no added filter effects. [Filter Settings] Select [Simultaneous Record w/o Filter] Settings: [ON]/[OFF] • [Simultaneous Record w/o Filter] is not available when using the following functions: –...
Page 228: Flash
Flash Using a Flash ™ Open/Close the built-in flash To open the flash To close the flash • The flash setting is fixed to [ ] (Forced Flash Off) while the flash is closed. (Except when using an external flash) •...
Page 229: Setting Flash
9. Flash Setting Flash You can set the flash function to control flash firing from the camera. [Flash Mode] Sets the flash mode. [Flash] Select [Flash Mode] The flash fires every time regardless of the recording conditions. Forced Flash On This is suitable for recording when there is Forced On/Red-Eye backlighting or under lighting such as fluorescent...
Page 230 9. Flash • The flash fires twice. The interval between the first and second firings is longer when [ ] or ] is set. The subject should not move until the second firing has finished. • [ ] and [ ] cannot be used when the following are set: –...
Page 231 9. Flash ™ Available Flash Settings by Recording Mode The available flash settings depend on the recording mode. ( : Available, —: Not available) Recording mode — — [Clear Portrait] ● — — [Silky Skin] ● — — [Sweet Child’s Face] ●...
Page 232 9. Flash ™ Shutter Speeds for Flash Modes [Flash Mode] Shutter speed (sec.) 1/50 * 1 to 1/50 1 In [ ] mode, the shutter speed will be 60 seconds to 1/50 of a second and in [ mode it will be [T] (Time) or 60 seconds to 1/50 of a second. •...
Page 233: [Flash Adjust.]
9. Flash • When taking pictures with flash with the lens hood attached, the lower portion of the photo may turn dark and the control of the flash may be disabled because the photo flash may be obscured by the lens hood. We recommend detaching the lens hood.
Page 234: [Flash Synchro]
9. Flash [Flash Synchro] When a moving subject is recorded at night using a slow shutter and flash, a trail of light may appear in front of the subject. If you set [Flash Synchro] to [2ND], you can take a dynamic picture with a trail of light appearing behind the subject by firing the flash immediately before the shutter closes.
Page 235: [Auto Exposure Comp.]
9. Flash [Auto Exposure Comp.] Automatically adjust the flash output in conjunction with the exposure compensation value. (210) [Flash] Select [Auto Exposure Comp.] Settings: [ON]/[OFF]...
Page 236: Recording Using A Wireless Flash
9. Flash Recording Using a Wireless Flash You can use a Flash (DMW-FL580L/DMW-FL360L/DMW-FL200L: optional) to record using a wireless flash. You can separately control the firing of three flash groups and the flash attached to the hot shoe of the camera. •...
Page 237 9. Flash Attach an external flash to the camera. (437) Set the wireless flashes to [RC] mode and then place them. • Set the channel and group for the wireless flashes. Enable the wireless flash function of the camera. ● [Flash] [Wireless] [ON]...
Page 238 9. Flash ™ Setting Items ([Wireless Setup]) • To fire a test flash, press [DISP.]. [TTL]: The camera automatically sets the flash output. [AUTO] * : Sets the flash output on the external flash side. [Firing [MANUAL]: Sets the flash output of the external flash Mode] manually.
Page 239 9. Flash ™ [Communication Light] Set the strength of communication light. [Flash] Select [Communication Light] Settings: [HIGH]/[STANDARD]/[LOW]...
Page 240: Recording Videos
Recording Videos Recording Videos Start recording. ● Press the video rec. button. • Release the video rec. button right after you press it. Red REC frame indicator (349) Recording state indicator Remaining recording time Elapsed recording time Stop recording. ● Press the video rec.
Page 241 10. Recording Videos ™ [Rec Quality] Sets the image quality of videos to be recorded. Select [Rec Quality] Recording Sensor [Rec Quality] Picture size Bit rate frame rate output [4K/100M/30p] * 3840×2160 30 fps 100 Mbps [4K/100M/25p] * 3840×2160 25 fps 100 Mbps [4K/100M/24p] * 3840×2160...
Page 242 10. Recording Videos • Since the camera employs the VBR recording format, the bit rate is changed automatically depending on the subject to record. As a result, video recording time is shortened when a fast-moving subject is recorded. • When the following functions are being used, 4K video cannot be set. –...
Page 243 10. Recording Videos • Even when playback is performed on a supported device, situations may occur where image or sound quality is poor, recording information is not displayed correctly, or playback is not possible, for example. If you experience any of these, play them back on the camera. •...
Page 244: Taking Pictures While A Video Is Being Recorded
10. Recording Videos Taking pictures while a video is being recorded Press the shutter button fully during the video recording. • Simultaneous recording indicator is displayed while recording pictures. • Recording with the Touch Shutter function is also available.
Page 245 10. Recording Videos ™ Setting the video priority or picture priority mode Select [Picture Mode in Rec.] • Pictures will be recorded with a picture size determined by the [Rec Quality] setting for videos. • Only JPEG images are recorded when [Quality] is set to ], [ ], or [ ].
Page 246: Creative Video Mode
10. Recording Videos Creative Video Mode It is possible to manually change the aperture, shutter speed and ISO sensitivity and record videos. Set the mode dial to [ Set the exposure mode. ● [Exposure Mode] [P]/[A]/[S]/[M] • You can perform the same exposure operations as the [ modes.
Page 247 10. Recording Videos Start recording. ● Press the shutter button or video rec. button Stop recording. ● Press the shutter button or video rec. button again. • It is also possible to display the selection screen by touching the recording mode icon in recording screen.
Page 248 10. Recording Videos ™ Operations During Video Recording Change the exposure and audio settings with touch operation to prevent operation sounds from being recorded. Touch [ Touch an icon. Zoom Exposure compensation (When using an interchangeable lens ISO sensitivity supporting power Sound recording zoom) level adjustment...
Page 249: [4K Live Cropping]
10. Recording Videos [4K Live Cropping] By cropping a part of the image from the image displayed in the live view, it is possible to record FHD video that incorporates panning and zooming with the camera staying in a fixed position. •...
Page 250 10. Recording Videos Set the cropping start frame. ● Select the range to be cropped and press Cropping start frame Set the cropping end frame. ● Select the range to be cropped and Reset Reset press Cropping end frame • To redo the settings for the position and size of the start frame and the end frame, press Start recording.
Page 251 10. Recording Videos ™ Operations for Setting the Cropping Frame Button Touch Description of operation operation operation Touch Moves the frame. Pinch out/ Enlarges/reduces the frame. pinch in Start frame: Returns the frame position and size to the default settings. [DISP.] [Reset] End frame: Cancels the settings for the position...
Page 252: Slow & Quick Mode
10. Recording Videos Slow & Quick Mode Records slow-motion videos and quick-motion videos. • A video will be recorded at [FHD] under [MP4]. Set the mode dial to [ Set the recording settings. ● [S&Q Exposure Mode]/ [S&Q Recording Frame Rate]/ [S&Q Effect] •...
Page 253 10. Recording Videos Start recording. ● Press the shutter button or video rec. button Stop recording. ● Press the shutter button or video rec. button again. • It is also possible to display the selection screen by touching the recording mode icon in recording screen.
Page 254 10. Recording Videos ™ Operations During Video Recording You can change settings like exposure with touch operation. Touch [ Touch an icon. Zoom Exposure (When using an compensation interchangeable lens ISO sensitivity supporting power zoom) S&Q Effect * Aperture value Shutter speed 1 This cannot be operated during recording.
Page 255: Slow & Quick Menu
10. Recording Videos Slow & Quick Menu ™ [S&Q Exposure Mode] Select the exposure mode. Settings: [P]/[A]/[S]/[M] • You can perform the same exposure operations as the [ ] modes. • Program Shift does not work. ™ [S&Q Recording Frame Rate] Select the recording frame rate.
Page 256 10. Recording Videos ™ [S&Q Effect] Select the speed effect. Records videos sped up to about 8-times speed. Example: [8xQUICK] When set to [60p]: 8 frames/second. When set to [50p]: 6 frames/second. Quick motion When set to [30p]: 4 frames/second. video When set to [25p]: 3 frames/second.
Page 257: Snap Movies
10. Recording Videos Snap Movies You can specify the recording time in advance and record videos casually like you take snapshots. The function also allows you to shift a focus at the start of recording and add fade in/out effects in advance. •...
Page 258 10. Recording Videos Elapsed recording time Set recording time • Immediately release the video rec. button after pressing it. • You cannot stop video recording in the middle. The recording will stop automatically when the set recording time has elapsed. ™...
Page 259 10. Recording Videos • Videos recorded with [WHITE-IN] or [BLACK-IN] are displayed as all-white or all-black thumbnails in Playback Mode. • If you assign [Snap Movie] to [Fn Button Set] in [Custom] ([Operation]) menu (295), you can display a screen that lets you switch [Snap Movie] between [ON]/[OFF] by pressing the assigned function button.
Page 260 10. Recording Videos Button operation Press [ Press to move the frame, and press (First position) • If you press [DISP.] before pressing , the frame will return to the center. Repeat step (Second position) • To cancel the frame settings, press •...
Page 261: Video Settings (Auto Focus)
10. Recording Videos Video Settings (Auto Focus) This section describes the use of AF when recording videos. • In “6. Focus/Zoom”, the functions described work with both pictures and video. Please also refer to those sections. – Selecting the Focus Mode: 126 –...
Page 262: [Af Custom Setting(Video)]
10. Recording Videos [AF Custom Setting(Video)] You can fine-adjust the focusing method for video recording using [Continuous AF]. Select [AF Custom Setting(Video)] [ON] Enables the following settings. [OFF] Disables the following settings. [+] side: Focus moves at a faster speed. [AF Speed] [–] side: Focus moves at a slower speed.
Page 263: Video Settings (Brightness)
10. Recording Videos Video Settings (Brightness) This section describes the brightness settings used during video recording. • In “8. Brightness (Exposure)/Coloring/Picture effect”, the functions described work with both pictures and video. Please also refer to those sections. – [Metering Mode]: 209 –...
Page 264: [Iso Sensitivity (Video)]
10. Recording Videos [ISO Sensitivity (video)] Sets the lower and upper limits for ISO sensitivity when ISO sensitivity is set to [AUTO]. Select [ISO Sensitivity (video)] Sets the lower limit for ISO sensitivity when ISO [ISO Auto Lower Limit sensitivity is [AUTO]. Setting] •...
Page 265: Video Settings (Audio)
10. Recording Videos Video Settings (Audio) Explains the audio setting during video recording. [Sound Rec Level Disp.] The sound recording level is displayed on the recording screen. Select [Sound Rec Level Disp.] Settings: [ON]/[OFF] [Sound Rec Level Adj.] Sets the sound recording level. Select [Sound Rec Level Adj.] Automatically adjusts the audio input level to smooth out the [AUTO]...
Page 266: [Wind Noise Canceller]
10. Recording Videos [Wind Noise Canceller] This reduces the wind noise coming into the built-in microphone while maintaining sound quality. Select [Wind Noise Canceller] This effectively reduces the wind noise by reducing the low- [HIGH] pitched sound when a strong wind is detected. This reduces wind noise without loss of sound quality by filtering [STANDARD] out only wind noise.
Page 267: [Built-In Mic]
10. Recording Videos [Built-in Mic] Sets the sound pickup range when using the built-in microphone. Select [Built-in Mic] Setting Sound pickup range When the AF mode is set to [ ] ([Face/Eye Detection]) and the camera recognizes a face, it switches to [AUTO] ] ([TRACKING]) * .
Page 268: [Built-In Mic Indicator]
10. Recording Videos [Built-in Mic Indicator] Displays the sound pickup range and sound pickup target for the built-in microphone. Select [Built-in Mic Indicator] Settings: [ON]/[OFF] Sound pickup range Sound pickup target * 1 When the [Built-in Mic] is in [ ] ([AUTO]) or [ ] ([TRACKING]), and a face is recognized by [...
Page 269: Video Settings (Display)
10. Recording Videos Video Settings (Display) This section describes the main assist functions that are convenient when recording. • The [Custom] ([Monitor / Display]) menu has display assist functions such as the center marker. For details, refer to page 342. [Zebra Pattern] Parts that are brighter than the benchmark value are displayed with stripes.
Page 270: [Frame Marker]
10. Recording Videos [Frame Marker] A frame with the set aspect ratio is displayed on the recording screen. This allows you to see during recording the angle of view that will be achieved with trimming (cropping) in post-processing. Select [Frame Marker] [ON] Displays video grid lines on the recording screen.
Page 271: Log Recording
• Post-production processing is enabled by utilizing LUT (Look-Up Table). You can download LUT data from the following support site: https://panasonic.jp/support/global/cs/dsc/download/index3.html (English only) • When [Photo Style] is set to [V-Log L], the recording screen and images output via HDMI will darken.
Page 272: Playing Back And Editing Of Images
Playing Back and Editing of Images This chapter explains how to play back and delete pictures and videos. It also explains editing images. • Images recorded on devices other than this one may not be played back or edited correctly on this camera. •...
Page 273 11. Playing Back and Editing of Images Stop playback. ● Press the shutter button halfway. ● You can also stop playback by pressing [...
Page 274: Playing Back Videos
11. Playing Back and Editing of Images Playing Back Videos Display the playback screen. ● Press [ Select a video. • For information about how to select images, refer to page 272. • The [ ] video icon is displayed for a video.
Page 275 11. Playing Back and Editing of Images ™ Operations During Video Playback Button Touch Description of operation operation operation Plays/pauses. Stops. Performs fast-rewind playback. • If you press again, the fast-rewind speed increases. Performs frame-by-frame rewinding (while paused). Performs fast-forward playback. •...
Page 276: Extracting A Picture
11. Playing Back and Editing of Images Extracting a Picture Extract one frame of a video and save it as a JPEG image. Pause playback at the position you wish to extract a picture. ● Press • To fine-adjust the position, press (rewind frame-by-frame or forward frame- by-frame).
Page 277: Switching The Display Mode
11. Playing Back and Editing of Images Switching the Display Mode You can use features to do things like enlarge recorded images for display and switch to thumbnail display to display multiple images at once (multi- playback). You can also switch to calendar display to show images of a selected recording date.
Page 278: Thumbnail Screen
11. Playing Back and Editing of Images Thumbnail Screen Switch to thumbnail display. ● Rotate to the left. ● The display is switched in the order of 12-image screen 30-image screen. • Rotating to the left during 30-image screen display switches to calendar display.
Page 279: Calendar Playback
11. Playing Back and Editing of Images Calendar Playback Switch to calendar playback. TUE WED ● Rotate to the left. 2020 ● The display is switched in the order of thumbnail screen (12 images) Thumbnail screen (30 images) Calendar playback. •...
Page 280: Group Images
11. Playing Back and Editing of Images Group Images Images recorded with Time Lapse Shot or Stop Motion Animation recording are handled as group images in the camera, and can be deleted and edited on a group basis. You can also delete and edit each image in a group individually. ™...
Page 281: Deleting Images
11. Playing Back and Editing of Images Deleting Images • Images cannot be restored once they have been deleted. Carefully confirm the images before deletion. • If you delete a group image, all images in the group are deleted. ™ [Delete Single] Press [ ] in playback state.
Page 282: [Light Composition]
11. Playing Back and Editing of Images [Light Composition] Select multiple frames from 4K burst files that you wish to combine. Parts of the image that are brighter than the preceding frame will be superimposed on the preceding frame to combine the frames into one picture.
Page 283 11. Playing Back and Editing of Images ™ [Composite Merging]: Selecting frames to combine Drag the slide bar or use to select the frames to combine. Press • The selected frames are remembered, and the display goes to the preview screen.
Page 284: [Sequence Composition]
11. Playing Back and Editing of Images [Sequence Composition] Select multiple frames from a 4K burst file to create a sequence composition of a moving subject into one picture. Select [Sequence Composition]. ● [Sequence Composition] Select the 4K burst file. ●...
Page 285 11. Playing Back and Editing of Images Drag the slide bar or use to select the frames to combine. Press • The selected frames are remembered, and the display goes to the preview screen. • Use to select items and press to perform the following operations.
Page 286: [Clear Retouch]
11. Playing Back and Editing of Images [Clear Retouch] You can erase unnecessary parts recorded on the pictures taken. • The erasure operation can only be performed by touching. [Clear Retouch] automatically enables the touch operation. Select [Clear Retouch]. ● [Clear Retouch] Select a picture.
Page 287 11. Playing Back and Editing of Images Erasing details (enlarging the display) Touch [SCALING] • On the touch screen, pinch out your two fingers to zoom in, and pinch in REMOVE REMOVE your two fingers to zoom out. SCALING SCALING •...
Page 288: [Raw Processing]
11. Playing Back and Editing of Images [RAW Processing] This processes pictures taken in RAW format on the camera and saves them in JPEG format. Select [RAW Processing]. ● [RAW Processing] Select the RAW image. ● Press to select an image and then press •...
Page 289 11. Playing Back and Editing of Images Change the setting. ● Rotate • The image can be enlarged/reduced by pinching out/pinching in the screen. Confirm the setting. ● Press ● The screen of Step reappears. To set another item, repeat Steps Save the image.
Page 290 11. Playing Back and Editing of Images Selects a Photo Style. • You cannot select a Photo Style for images recorded [Photo Style] with [V-Log L]. You cannot select [V-Log L] for images not recorded with [V-Log L]. [i.Dynamic] Selects the setting of [i.Dynamic]. [Contrast] Adjusts the contrast.
Page 291 11. Playing Back and Editing of Images ™ Displaying a Comparison Screen You can change a setting while checking the effect by displaying images with the applied setting value side by side. Press [DISP.] in the screen of Step • The image with the current setting displayed at the center.
Page 292: [Video Divide]
11. Playing Back and Editing of Images [Video Divide] Divide a recorded video or 4K burst file into two. • Images cannot be returned to their original state once they have been divided. Carefully confirm the images before performing the divide operation. •...
Page 293: Camera Customization
Camera Customization This chapter describes the customization function with which you can configure the camera to your preferred settings. Change how buttons, dials, etc. on the camera are to be operated. [Fn Button Set] 294 [Dial Operation Switch Setup] 299 Register the currently set information of the camera.
Page 294: Fn Buttons
12. Camera Customization Fn Buttons You can register functions to the Fn (Function) buttons. Different functions can be set for both during recording and playback. ™ Fn Button Default Settings Fn buttons [Setting in REC mode] [Setting in PLAY mode] [Fn1] [Exposure Comp.] [Wi-Fi]...
Page 295 12. Camera Customization Register Functions to the Fn Buttons Select [Fn Button Set]. ● [Fn Button Set] [Setting in REC mode]/[Setting in PLAY mode] Select the button. ● Press to select the button and then press ● Selection is also possible by rotating Register the function.
Page 296 12. Camera Customization ™ Functions that can be assigned in [Setting in REC mode] [4K Photo Mode] [Quality] 164 121 [Exposure Comp.] [Metering Mode] 210 209 [Wi-Fi] [Burst Rate] 384 323 [Q.MENU] [Self Timer] 63 186 [Video Record] [Live View Composite] 240 103 [LVF/Monitor Switch]...
Page 297 12. Camera Customization [Special Mic. Directivity Adjust] [Zoom Speed] 440 158 [Silent Mode] [Sensitivity] 203 214 [Peaking] [White Balance] 344 217 [Histogram] 131 345 [AF Mode/MF] 148 [Guide Line] 345 [Drive Mode] 159 [Frame Marker] 270 [Rec / Playback Switch] [Zebra Pattern] 346 •...
Page 298 12. Camera Customization Use the Fn Buttons During recording, pressing the Fn buttons enables usage of the functions registered in [Setting in REC mode], and during playback, usage of the functions registered in [Setting in PLAY mode]. Press the Fn button. Select a setting item.
Page 299: [Dial Operation Switch]
12. Camera Customization [Dial Operation Switch] This temporarily changes the functions operated with (front dial) and (control dial). Register Functions to the Dials Select [Dial Operation Switch Setup]. ● [Dial Set.] [Dial Operation Switch Setup] Register the function. ● Press to select a function and then press ●...
Page 300 12. Camera Customization Temporarily Change Dial Operation Set [Dial Operation Switch] to the Fn button. (294) Switch dial operation. ● Press the Fn button set in Step ● A guide will display the functions registered to • If no operations are performed, then several seconds later, the guide disappears.
Page 301: Quick Menu Customization
12. Camera Customization Quick Menu Customization For information about Quick menu operation methods, refer to page 63. Register to the Quick Menu Change the menus to be displayed in the Quick menu. Up to 15 items can be set to the Quick Menu. Select [Q.MENU].
Page 302 12. Camera Customization Display the editing screen for the Quick menu. ● Press and select [ ], and then press Register menu items. ● Press to select the menu item in the top row and press • Items that are displayed in light gray in the top row have already been set.
Page 303 12. Camera Customization Close the Quick menu. ● Press the shutter button halfway. ● You can also close the menu by pressing [Q.MENU].
Page 304 12. Camera Customization ™ Functions That Can Be Registered [Photo Style] [Histogram] 223 345 [Filter Effect] [Guide Line] 226 345 119 [Frame Marker] 270 [Picture Setting] 120 [Zebra Pattern] 346 [Quality] 121 [Monochrome Live View] 342 [Metering Mode] 209 [Constant Preview] 343 [Burst Rate] 323...
Page 305: Custom Mode
12. Camera Customization Custom Mode Menu settings that match your preferences can be registered in Custom mode ([C1] to [C3]). You can use registered settings by switching the custom mode menu to [SET1] to [SET3] modes. Register in Custom Mode You can register the currently set information of the camera.
Page 306 12. Camera Customization • You cannot register [ ] mode in Custom mode. Using Custom Mode Set the mode dial to [ ]. ● The last-used Custom mode will be called up. ™ Switching the Custom Mode [SET1]/[SET2]/[SET3] • It is also possible to display the selection screen by touching the recording mode icon in recording screen.
Page 307: My Menu
12. Camera Customization My Menu Register frequently-used menus in My Menu. A maximum of 23 items can be registered. Registration in My Menu Select [Add]. ● [My Menu Setting] [Add] Register. ● Select the menu to register and then press ™...
Page 308 12. Camera Customization Edit My Menu You can reorder the display order of My Menu, and delete unnecessary menus. Select [My Menu Setting] [Add] Selects and registers the menus to be displayed in My Menu. Changes the order of My Menu. [Sorting] Select the menu to change, then set the destination.
Page 309: Menu Guide
Menu Guide This chapter provides a list of menus and describes them in detail. • For information about menu operation methods, refer to page 67. Search the Menus List of Menu 310 Learn About the Menu Functions and Default Settings [Rec] menu 316 [Motion Picture] menu...
Page 310: List Of Menu
13. Menu Guide List of Menu : Menu items common to the [Rec] menu and [Motion Picture] menu. Their settings are synchronized. [Intelligent Auto] menu [Rec] menu [Intelligent Auto Mode] [Aspect Ratio] 314 316 [iHandheld Night Shot] [Picture Size] 314 316 [iHDR] [Quality]...
Page 311 13. Menu Guide [Rec] menu (Continued) [Motion Picture] menu [Silent Mode] [Rec Quality] 324 329 [Shutter Type] [Snap Movie] 324 329 [Shutter Delay] [Focus Mode] 325 329 [Bracket] [Continuous AF] 325 329 [HDR] [AF Custom Setting(Video)] 325 329 [Multi Exp.] [Photo Style] 327 329...
Page 312 13. Menu Guide [Custom] menu [Monitor / Display] 342 [Exposure] 333 [Auto Review] 342 [ISO Increments] 333 [Monochrome Live View] 342 [Extended ISO] 333 [Constant Preview] 343 [Exposure Comp. Reset] 333 [Live View Boost] 343 [Focus / Release Shutter] 333 [Peaking] 344 [AF/AE Lock]...
Page 313 13. Menu Guide [My Menu] [Setup] menu [My Menu Setting] [Cust.Set Mem.] 356 308 [Clock Set] [Add] 356 308 [World Time] [Sorting] 356 308 [Travel Date] [Delete] 357 308 [Wi-Fi] [Display from My Menu] 357 308 [Bluetooth] 358 [Wireless Connection Lamp] 358 [Playback] menu [Beep]...
Page 314: Menus Displayed In Specific Recording Modes
13. Menu Guide Menus displayed in specific recording modes : Default settings [Intelligent Auto] menu ]/ [ [Intelligent Auto 79 Mode] Switches between [ ] mode and [ ] mode. [ON] / [OFF] [iHandheld Night When the camera detects [iHandheld Night Shot], 81 Shot] it records a still picture with less jitter and noise by...
Page 315: [Slow & Quick] Menu
13. Menu Guide [Slow & Quick] menu [P]/[A]/[S]/[M] [S&Q Exposure 255 Mode] Selects the exposure mode. [60p]/[50p]/[30p]/ [25p] [S&Q Recording 255 Frame Rate] Selects the recording frame rate. [8xQUICK]/[4xQUICK]/ [2xQUICK]/[2xSLOW]/ [4xSLOW] [S&Q Effect] 256 Select the speed effect. [Scene Guide] menu [Scene Switch] Displays the scene selection screen.
Page 316: [Rec] Menu
13. Menu Guide [Rec] Menu Menu items common to the [Rec] menu and [Motion Picture] menu. Their settings are synchronized. Default settings [4:3]/[3:2]/[16:9]/[1:1] [Aspect Ratio] 119 You can select the image aspect ratio. [L]/[M]/[S] [Picture Size] 120 Sets the picture’s image size. [Quality] 121 Set the compression rate used for storing pictures.
Page 317 13. Menu Guide [sRGB]/[AdobeRGB] This sets the method for correcting the color reproduction of the recorded images on the screens of a PC or on a device such as a printer. [sRGB]: This is widely used in PCs and similar devices.
Page 318 13. Menu Guide ] ([Standard])/ ] ([Higher contrast])/ ] ([Lower contrast])/ ] ([Brighten shadows])/ ] (Custom) You can adjust the highlights and shadows in a picture while confirming the brightness of these areas on the screen. • Rotate to adjust the highlighted areas and rotate to adjust the shadowed areas.
Page 319 13. Menu Guide • When using [Filter Settings], [Highlight Shadow] is not available. • When [Photo Style] is set to [V-Log L], this is [Highlight Shadow] fixed to [ ] ([Standard]). — (Continued) • The settings adjusted in [ ], [ ], [ ], or ] will be restored to the default settings when...
Page 320 13. Menu Guide [ ]/[ [Flash Mode] 229 Sets the flash mode. [Flash Synchro] [1ST]/[2ND] 234 Sets the flash mode to Second Curtain Synchro. [–2 EV] to [+2 EV] [Flash Adjust.] ( [±0 EV]) 233 Adjusts the flash output if a picture taken using the flash is too bright or too dark.
Page 321 13. Menu Guide [ISO Auto Lower [200] to [12800] Limit Setting] [ISO Auto Upper [AUTO]/[400] to [25600] Limit Setting] [ISO Sensitivity — You can set the upper limit of ISO sensitivity when (photo)] ISO sensitivity is set to [AUTO] or [ •...
Page 322 13. Menu Guide [ON]/[OFF] The camera automatically removes noise generated when recording images with a slow shutter speed. [Long Shtr NR] — • Recording is not possible during noise reduction. • When the following functions are being used, [Long Shtr NR] is not available: –...
Page 323 13. Menu Guide [AUTO]/ [OFF] The camera raises the image resolution by — correcting the blurriness caused by diffraction [Diffraction when the aperture is closed. Compensation] • Compensation effect may not be achieved depending on the recording conditions. • Noise may stand out with higher ISO sensitivity. [Operation Mode] ]/[OFF] [E-Stabilization...
Page 324 13. Menu Guide ] etc. [SET] 2 sec. to 10 sec. ( 3 sec.) 187 [Self Timer] Sets the self-timer duration. [Start] [Shooting Interval [ON]/[OFF] Setting] [Start Time] [Now]/[Start Time Set] [Time Lapse Shot] 189 [Image Count] [Shooting Interval] Starts/stops recording automatically at a set recording interval.
Page 325 13. Menu Guide [8SEC]/[4SEC]/[2SEC]/[1SEC]/ [OFF] To reduce camera shake and shutter-induced blur, the shutter is released after the specified time has [Shutter Delay] — passed since the shutter button was pressed. • When the following functions are being used, [Shutter Delay] is not available: –...
Page 326 13. Menu Guide [Auto Align]: [ON]: Automatically adjusts the displacement of pictures caused by jitter, etc. We recommend using this setting to take pictures with a handheld camera. [OFF]: Does not adjust the displacement of pictures. We recommend using this setting when you use a tripod.
Page 327 13. Menu Guide [Start] [Auto Gain] [ON]/[OFF] [Overlay] [ON]/ [OFF] You can apply an effect equivalent to four exposures on a single image. [Auto Gain]: Automatically adjusts brightness in accordance with image count. [Overlay]: Allows multiple exposure for recorded RAW images. After selecting [Start], a selection screen for images to stack is displayed.
Page 328 13. Menu Guide • To finish multiple exposure recording before starting the recording, press [Fn2] on the recording screen. • Recording information for the last-recorded image will be saved as recording information for images recorded with multiple exposures. • [Overlay] can be set only for RAW images [Multi Exp.] recorded with the camera.
Page 329: [Motion Picture] Menu
13. Menu Guide [Motion Picture] Menu Menu items common to the [Rec] menu and [Motion Picture] menu. Their settings are synchronized. Default settings [Rec Quality] Sets the video recording image quality. 241 [ON]/ [OFF] [SET] [Record time] [Pull Focus] [Snap Movie] 257 [Fade] You can specify the recording time in advance and...
Page 330 13. Menu Guide [Filter Effect] [ON]/ [OFF]/[SET] [Simultaneous [ON]/ [OFF] Record w/o Filter] 226 [Filter Settings] This mode records with additional image effects (filters). [0-255]/ [16-255] [Luminance Level] You can set the luminance range to suit the 263 purpose of video recording. Type of optical measurement to measure 209 [Metering Mode]...
Page 331 13. Menu Guide [AUTO]/ [OFF] The camera raises the image resolution by [Diffraction 323 correcting the blurriness caused by diffraction Compensation] when the aperture is closed. [Operation Mode] ]/[OFF] [E-Stabilization [HIGH]/ [STANDARD]/ 206 [Stabilizer] (Video)] [OFF] Configures image stabilizer settings. [1/50]/[1/60]/[1/100]/[1/120]/ [OFF] [Flkr Decrease] —...
Page 332 13. Menu Guide [HIGH]/ [STANDARD]/[OFF] [Wind Noise This reduces the wind noise coming into the built-in 266 Canceller] microphone while maintaining sound quality. [HIGH]/[STANDARD]/[LOW]/ [OFF] [Wind Cut] This reduces wind noise when an external 440 microphone is connected. [ON]/[OFF] You can reduce the zoom sound produced [Lens Noise Cut] 266 during video recording when you are using...
Page 333: [Custom] Menu
13. Menu Guide [Custom] Menu : Default settings [Custom] menu [Exposure] [1/3EV]/[1 EV] [ISO Increments] Changes the intervals between ISO sensitivity adjustment values. [ON]/ [OFF] [Extended ISO] Extends the setting range of ISO sensitivity. [ON]/ [OFF] [Exposure Comp. This resets the exposure value when you change the Reset] recording mode or turn off the camera.
Page 334 13. Menu Guide [Custom] menu [Focus / Release Shutter] [ON]/ [OFF] When the amount of camera shake becomes small, the camera will automatically adjust the focus and focus adjustment will then be quicker when the shutter button is [Quick AF] pressed.
Page 335 13. Menu Guide [Custom] menu [Focus / Release Shutter] [ON]/[OFF] When recording in low light conditions, the AF assist light turns on when you press the shutter button halfway, making it easier for the camera to focus. • The effective range of the AF Assist Lamp is different depending on the lens used.
Page 336 13. Menu Guide [Custom] menu [Focus / Release Shutter] [ON]/ [OFF] Moves the AF area or MF assist using the cursor button while recording. ], [ ], [ ], or [ ] is selected, you can • When [ move the AF area, when [ ] is selected, you can move the lock start position, and when [ ] is selected, you...
Page 337 13. Menu Guide [Custom] menu [Focus / Release Shutter] [ON]/ [OFF] This stores separate AF area positions for when the camera is held vertically and when it is held horizontally. The camera memorizes two different vertical positions, one with [Focus Switching the camera’s right side facing down and one with the left for Vert / Hor] side facing down.
Page 338 13. Menu Guide [Custom] menu [Focus / Release Shutter] [ON]/ [OFF] You can fine-adjust the focus manually during AF Lock. – When focus mode is [AFS], and the shutter button is [AF+MF] pressed halfway – When locked using the Fn button [AF LOCK] or [AF/AE LOCK] When an ]/ [...
Page 339 13. Menu Guide [Custom] menu [Operation] [Setting in REC mode] [Setting in PLAY mode] [Fn Button Set] Registers a function to the Fn button. • For details, refer to page 295. [Front Dial] ]/[OFF] This sets the operations of the dials in the setting screen for [ISO Displayed ISO sensitivity.
Page 340 13. Menu Guide [Custom] menu [Operation] [Assign Dial (F/SS)] Sets the operations to be assigned to the dials in [ mode. ]: Assigns the aperture value to the front dial, and the shutter speed to the control dial. ]: Assigns the shutter speed to the front dial, and the aperture value to the control dial.
Page 341 13. Menu Guide [Custom] menu [Operation] [Cursor] [ON]/[OFF] [Touch Screen] [ON]/[OFF] [Dial] [ON]/[OFF] You can set an object for which operation is disabled when [Operation Lock [Operation Lock] is assigned to the function button using Setting] [Fn Button Set] (295) in the [Custom] ([Operation]) menu. [Cursor]: Cursor buttons and [Touch Screen]: Touch screen [Dial]:...
Page 342 13. Menu Guide [Custom] menu [Monitor / Display] [Duration Time [HOLD]/[5SEC] to [1SEC] ( [2SEC])/ (photo)] [OFF] [Duration Time (4K [HOLD]/[OFF] PHOTO)] [Duration Time (Post [HOLD]/[OFF] Focus)] [Playback Operation [ON]/ [OFF] Priority] This displays an image immediately after it is recorded. [Duration Time (photo)]: Sets the Auto Review when taking pictures.
Page 343 13. Menu Guide [Custom] menu [Monitor / Display] [ON]/ [OFF] [SET] [Preview While MF Assist] You can always confirm the effects of aperture and shutter [Constant Preview] speed on the recording screen when in [ ] mode. Preview also operates in the MF Assist screen when [Preview While MF Assist] is set to [ON].
Page 344 13. Menu Guide [Custom] menu [Monitor / Display] [ON]/[OFF] [SET] [Detect Level] [Display Color] During MF operation, in-focus portions (portions on the screen with clear outlines) are highlighted with color. • When [Detect Level] in [SET] is set to [HIGH], portions to be highlighted are reduced, allowing you to achieve a more precise focus.
Page 345 13. Menu Guide [Custom] menu [Monitor / Display] [ON]/ [OFF] This displays the histogram. Turning this [ON] displays the histogram transition screen. Press to set the position. • You can also move the position by dragging the histogram on the recording screen. •...
Page 346 13. Menu Guide [Custom] menu [Monitor / Display] [ON]/ [OFF] [SET] [Frame Aspect] [Frame Color] [Frame Marker] [Frame Mask] A frame with the set aspect ratio is displayed on the recording screen. • For details, refer to page 270. [ON]/ [OFF] [Center Marker] The center of the recording screen will be displayed as [+].
Page 347 13. Menu Guide [Custom] menu [Monitor / Display] [ON]/ [OFF] This displays the exposure meter. [Expo.Meter] • Set to [ON] to display the exposure meter when performing Program Shift, setting aperture, and setting shutter speed. • If no operations are performed for a certain period of time, the exposure meter disappears.
Page 348 13. Menu Guide [Custom] menu [Monitor / Display] [Horizontal Image [AUTO]/[ON]/[OFF] Flip(Monitor)] [Vertical Image [AUTO]/[ON]/[OFF] Flip(Monitor)] You can set whether the screen flips or not depending on the facing or angle of the monitor during recording. [Horizontal Image Flip(Monitor)] [AUTO]: The screen automatically flips horizontally according to the angle to which the monitor is [LVF/Monitor Disp.
Page 349 13. Menu Guide [Custom] menu [Monitor / Display] [ON]/[OFF] [Monitor Info. Disp.] Displays the monitor recording information screen. Switching the angle of view setting used for recording still pictures and video. ]: Indicated as the angle of view when recording still [Rec Area] pictures.
Page 350 13. Menu Guide [Custom] menu [Lens / Others] [ON]/ [OFF] [Lens Position The camera saves the focus position when you turn it off. Resume] When an interchangeable lens that is compatible with power zoom is in use, the zoom position is also saved. [Disp Focal Length] [ON]/[OFF] [Step Zoom]...
Page 351 13. Menu Guide [Custom] menu [Lens / Others] [SMOOTH]/ [1/3EV] [SMOOTH]: You can finely adjust the aperture value. [1/3EV]: You can adjust the aperture value in increments of 1/3 EV. You can change the aperture adjustment increment by operating the aperture ring. •...
Page 352 13. Menu Guide [Custom] menu [Lens / Others] [ON]/[OFF] You can set whether or not to record the camera’s vertical orientation information during video recording. [ON]: Records vertical orientation information. Videos [Vertical Position recorded with the camera held vertically will be Info (Video)] automatically played back vertically on the PC, smartphone, etc.
Page 353 13. Menu Guide [Custom] menu [Lens / Others] [ON]/ [OFF]/[MEMORY] The Face Recognition function recognizes a face similar to a registered face and automatically adjusts focus and exposure for the face with higher priority. Registering face pictures Up to 6 people’s face pictures can be registered along with such information as name and birthdate.
Page 354 13. Menu Guide [Custom] menu [Lens / Others] Editing or deleting information about registered persons to select [MEMORY] and press to select the picture of the person to be edited or deleted and press to select the item and press [Info Edit]: Edit name or other registered information.
Page 355 13. Menu Guide [Custom] menu [Lens / Others] ]/ [OFF] / [SET] The name and age of the baby/pet are recorded to the image. Setting the name and age in months/years to select [SET] and press to select [Baby1], [Baby2] or [Pet] and press to select [Age] or [Name] and press to select [SET] and press Enter the [Age].
Page 356: [Setup] Menu
13. Menu Guide [Setup] Menu : Default settings [C1]/[C2]/[C3] [Cust.Set Mem.] You can register the currently set information of the camera. • For details, refer to page 305. Sets the date and time. [Clock Set] • For details, refer to page 47. ] [Destination] ] [Home] Sets the times for the region where you live and your travel...
Page 357 13. Menu Guide [Travel Setup] [SET]/ [OFF] [Location] [SET]/ [OFF] [Travel Setup]: If you set your travel schedule and record pictures, the day of your trip on which the picture was taken will be recorded. [Location]: Once the [Travel Setup] is set, you can set the location.
Page 358 13. Menu Guide [Bluetooth] (379) [Send Image (Smartphone)] (411) [Remote Wakeup] (400) [Returning from Sleep Mode] (394) [Auto Transfer] (397) [Bluetooth] [Location Logging] (399) [Auto Clock Set] (401) [Wi-Fi network settings] [Wi-Fi network settings]: Registers the Wi-Fi access point. Wireless access points used to connect the camera to Wi-Fi networks will be registered automatically.
Page 359 13. Menu Guide [Sleep Mode] [10MIN.]/ [5MIN.]/[2MIN.]/[1 MIN.]/ [OFF] [Sleep Mode(Wi-Fi)] [ON]/[OFF] [Auto LVF/Monitor [5MIN.]/[2MIN.]/[1 MIN.]/[OFF] Off] [Economy] [Power Save LVF [Time] Shooting] [Display] This is a function to automatically turn the camera to sleep (power save) status or turn off the viewfinder/monitor if no operation is performed for a set time.
Page 360 13. Menu Guide [Brightness]/[Contrast]/[Saturation]/[Red Tint]/[Blue Tint] This adjusts the brightness, coloring, and red or blue tints of the monitor/viewfinder. Press to select the setting item, and press [Monitor Display]/ to adjust. [Viewfinder] Press to confirm the setting. • It will adjust the monitor when the monitor is in use, and the viewfinder when the viewfinder is in use.
Page 361 ] [PC(Webcam)]: Select this setting when using this camera as a web camera. • You need to install “LUMIX Webcam Software (Beta)” on your PC. Refer to the support website below for details: https://panasonic.jp/support/global/cs/soft/download/ lumix_webcam.html (English only) [AUTO]/[4K/25p] * [HDMI Mode (Play)]...
Page 362 13. Menu Guide [HDMI Info Display [MODE1]/[MODE2]/[OFF] (Rec)] Sets the camera’s information display that will be outputted to the external device connected via HDMI. [MODE1]: This constantly outputs the information display. [MODE2]: This outputs the information display for 5 seconds when the camera is operated. [OFF]: This does not output the information display.
Page 363 13. Menu Guide [Select Folder]/[Create a New Folder]/[File Name Setting] [Folder / File Set the folder and file name where to save the images. Settings] • For details, refer to page 123. Resets the file number of the next recording to 0001. [No.Reset] •...
Page 364: [Playback] Menu
13. Menu Guide [Playback] Menu ™ How to Select an Image(s) in the [Playback] menu Follow the steps below when the image selection screen is displayed. When [Single] has been selected Press to select the image. Press • If [Set/Cancel] is displayed at the right bottom of the screen, the setting is canceled when is pressed again.
Page 365 13. Menu Guide : Default settings [ALL]/[Picture Only]/[Video Only] Selects image types and plays them back at regular intervals in order. [Start]: Starts slide show playback. [Effect]: Allows you to select the screen effects when switching from one picture to the next. [Setup]: [Duration]/[Repeat]/[Sound] [Duration]: Sets the duration to play an image.
Page 366 13. Menu Guide [Single]/[Multi]/[Cancel] You can set protection for images so that they will not be deleted by mistake. However, if you format the card, the protected images will [Protect] also be deleted. • For information about how to select images, refer to page 364.
Page 367 13. Menu Guide You can enter characters (titles etc.) on a recorded picture. After text has been registered, it can be stamped in prints using [Text Stamp] (369). Select a still picture (364). • [ ] is displayed for pictures with texts already stamped.
Page 368 13. Menu Guide [REPLACE]/[DELETE] Edit or delete the recognition information for pictures with incorrect information. to select picture and press to select a person and press [Face Rec Edit] • If [DELETE], go to step to select the person to replace for another and press to select [Yes] and press •...
Page 369 13. Menu Guide You can stamp the recording date and time, names, travel destination, travel dates, etc. on the recorded still pictures. Select a still picture (364). • [ ] is displayed on the screen if the picture is already stamped with [Text Stamp]. Select the content to stamp.
Page 370 13. Menu Guide [Single]/[Multi] Reduce the picture size of JPEG images and save them as different images to enable them to be easily used for web pages or sent as email attachments. • For information about how to select images, refer to page 364.
Page 371 13. Menu Guide Enlarge your still pictures and crop unwanted areas. to select a still picture and press Select area to crop and press Operations during cropping : Enlarges/reduces the screen. You can also perform the same operation by touching [ : Moves the enlarged area.
Page 372 13. Menu Guide This creates videos from group images recorded with [Time Lapse Shot]. Press to select a group images recorded with [Time Lapse Video] [Time Lapse Shot] and then press Select the options for creating a video to combine the pictures into a video.
Page 373 13. Menu Guide ["Yes" first]/ ["No" first] This sets which option, [Yes] or [No], will be highlighted [Delete first when the confirmation screen for deleting an image is Confirmation] displayed. ["Yes" first]: [Yes] is highlighted first. ["No" first]: [No] is highlighted first. [Delete All]/[Delete All Non-rating] Deletes all images in a card.
Page 374: Entering Characters
13. Menu Guide Entering Characters Follow the steps below when the character entry screen is displayed. Enter characters. ● Press to select characters and then press until the character to enter is displayed. (Repeat this) • To repeatedly enter the same character, rotate to the right to move the entry position cursor.
Page 375: Wi-Fi/Bluetooth
Wi-Fi/Bluetooth This chapter explains the Wi-Fi and Bluetooth functions of the camera. ® ® Remote Operations from a Smartphone You can use the “LUMIX Sync” for remote recording 377 and image transfers. Transferring Images from This Camera Send recorded images to a device connected via Wi-Fi by 404 operating the camera.
Page 376 14. Wi-Fi/Bluetooth • Do not remove the card or battery or move to an area without any reception while sending images. • The camera cannot be used to connect to a public wireless LAN connection. • We strongly recommend that you set an encryption to maintain information security.
Page 377: Connecting To A Smartphone
14. Wi-Fi/Bluetooth Connecting to a Smartphone You can perform remote recording and transfer images using the smartphone app “Panasonic LUMIX Sync” (hereinafter referred to as “LUMIX Sync”). Flow of connecting a smartphone Install “LUMIX Sync” on your smartphone. (378) Connect to a smartphone.
Page 378 14. Wi-Fi/Bluetooth Installing “LUMIX Sync” “LUMIX Sync” is an application for smartphones provided by Panasonic. Supported OS Android™: Android 9 or higher iOS: iOS 14 or higher Connect the smartphone to a network. (Android) Select “Google Play™ Store”. (iOS) Select “App Store”.
Page 379 14. Wi-Fi/Bluetooth Connecting to a Smartphone (Bluetooth Connection) Follow a simple connection setup procedure (pairing) to connect to a smartphone that supports Bluetooth Low Energy. When pairing is set up, the camera also automatically connects to the smartphone via Wi-Fi. •...
Page 380 14. Wi-Fi/Bluetooth Operating the camera in accordance with the smartphone guide. Set the camera to Bluetooth pairing standby state. ● [Bluetooth] [Bluetooth] [SET] [Pairing] ● The camera enters pairing standby state and the device name displayed. On the smartphone, select the camera’s device name.
Page 381 14. Wi-Fi/Bluetooth • The paired smartphone is registered as a paired device. • During Bluetooth connection, [ ] is displayed in the recording screen. When the Bluetooth function is enabled, but a connection is not established with the smartphone, [ ] appears translucent.
Page 382 14. Wi-Fi/Bluetooth ™ Connecting to a Paired Smartphone Connect paired smartphones using the following procedure. Enable the Bluetooth function of the camera. • [Bluetooth] [Bluetooth] [ON] On the smartphone, start up “LUMIX Sync”. • If a message is displayed indicating that the smartphone is searching for cameras, close the message.
Page 383 14. Wi-Fi/Bluetooth ™ Canceling Pairing Cancel the pairing setting of the camera. • [Bluetooth] [Bluetooth] [SET] [Delete] Select the smartphone for which to cancel the pairing. • Also cancel the pairing setting on the smartphone. • When [Reset Network Settings] in the [Setup] menu is used to reset the network settings, the information for registered devices is deleted.
Page 384 14. Wi-Fi/Bluetooth Connecting to a Smartphone (Wi-Fi connection) Use Wi-Fi to connect the camera and a smartphone. With default settings, password authentication is used to connect to your smartphone with enhanced security. You can also easily connect to your smartphone without entering a password.
Page 385 14. Wi-Fi/Bluetooth Scan the QR code displayed on the screen of the camera using “LUMIX Sync”. • (iOS devices) When a message to confirm the change of destination is displayed, select [Join]. ™ Manually entering a password to connect Display the screen in Step on page 384.
Page 386 14. Wi-Fi/Bluetooth ™ Connecting without Password Authentication Set [Wi-Fi Password] on the camera to [OFF]. • [Wi-Fi] [Wi-Fi Setup] [Wi-Fi Password] [OFF] Set the camera to Wi-Fi connection standby status. • [Wi-Fi] [Wi-Fi Function] [New Connection] [Remote Shooting & View] •...
Page 387 14. Wi-Fi/Bluetooth • When a device different than the one you want to connect to is displayed, the camera will automatically connect to that device if you select [Yes]. If there are other Wi-Fi connection devices nearby, we recommend using either QR code or manual password input to connect with password authentication.
Page 388 14. Wi-Fi/Bluetooth ™ Connection Methods Other Than the Default Settings When connecting with [Via Network], or [WPS Connection] in [Direct], follow the steps below: Display the connection method setting screen for the camera. • [Wi-Fi] [Wi-Fi Function] [New Connection] [Remote Shooting &...
Page 389 14. Wi-Fi/Bluetooth Terminating the Wi-Fi Connection To end the Wi-Fi connection between the camera and smartphone, follow the steps below. Set the camera to recording mode. ● Press the shutter button halfway. Terminate the Wi-Fi connection. ● [Wi-Fi] [Wi-Fi Function] [Yes] •...
Page 390: Operating The Camera With A Smartphone
14. Wi-Fi/Bluetooth Operating the Camera with a Smartphone This explains the functions for operating the camera from a smartphone. Functions described in this document with the ( ) symbol require a smartphone that supports Bluetooth Low Energy. Getting started: • Connect the camera to a smartphone. (379, 384) •...
Page 391 14. Wi-Fi/Bluetooth [Remote shooting] You can use the smartphone to record from a remote location while viewing the live view images from the camera. Select [ ] ([Remote shooting]) in the home screen. • (iOS devices) When a message to confirm the change of destination is displayed, select [Join].
Page 392 14. Wi-Fi/Bluetooth ™ Operation Method During Remote Recording Set either the camera or the smartphone as the priority control device to be used during remote recording. [Wi-Fi] [Wi-Fi Setup] Select [Priority of Remote Device] Operation is possible on both the camera and the smartphone.
Page 393 14. Wi-Fi/Bluetooth [Shutter Remote Control] You can use the smartphone as a remote control for the shutter. Select [ ] ([Shutter Remote Control]) in the home screen. Start recording. Starts/ends the video recording Takes a picture • Bulb recording (393) ™...
Page 394 14. Wi-Fi/Bluetooth ™ Shortening the Return Time from [Sleep Mode] You can shorten the time it takes for the camera to return from [Sleep Mode] when the [Shutter Remote Control] is used. Getting started: • Set [Remote Wakeup] in [Bluetooth] to [ON]. (400) [Bluetooth] Select [Returning from Sleep Mode] [Import / Remote...
Page 395 14. Wi-Fi/Bluetooth [Import images] Transfer an image stored on the card to the smartphone connected via Wi-Fi. Select [ ] ([Import images]) in the home screen. • (iOS devices) When a message to confirm the change of destination is displayed, select [Join]. Select the image to transfer.
Page 396 14. Wi-Fi/Bluetooth • When a video is played back, this has a small data size and is transmitted using “LUMIX Sync”, therefore its image quality will differ from that of the actual video recording. Depending on the smartphone and on the usage conditions, the image quality may deteriorate or the sound may skip during video or picture playback.
Page 397 14. Wi-Fi/Bluetooth [Auto Transfer] You can automatically transfer recorded pictures to a smartphone as they are taken. Enable [Auto Transfer] on the camera. ● [Bluetooth] [Auto Transfer] [ON] • If a confirmation screen is displayed on the camera asking you to terminate the Wi-Fi connection, select [Yes] to terminate it.
Page 398 14. Wi-Fi/Bluetooth ™ To Stop the Automatic Transfer of Images [Bluetooth] [Auto Transfer] Select [OFF] ● A confirmation screen is displayed, asking you to terminate the Wi-Fi connection. • If the [Bluetooth] and [Auto Transfer] settings of the camera are [ON], the camera automatically connects to the smartphone via Bluetooth and Wi-Fi when you turn on the camera.
Page 399 14. Wi-Fi/Bluetooth [Location Logging] The smartphone sends its location information to the camera via Bluetooth, and the camera performs recording while writing the acquired location information. Getting started: • Enable the GPS function on the smartphone. Enable [Location Logging] on the camera.
Page 400 14. Wi-Fi/Bluetooth [Remote Wakeup] Even when the camera is turned off, the smartphone can be used to start the camera and record images, or check the recorded images. Getting started: Enable [Remote Wakeup] on the camera. • [Bluetooth] [Remote Wakeup] [ON] Set the camera on/off switch to [OFF].
Page 401 14. Wi-Fi/Bluetooth [Auto Clock Set] Synchronize the clock and the time zone setting of the camera with those of a smartphone. Enable [Auto Clock Set] on the camera. ● [Bluetooth] [Auto Clock Set] [ON]...
Page 402: Displaying Still Pictures On A Tv
14. Wi-Fi/Bluetooth Displaying still pictures on a TV You can display still pictures on a TV that is compatible with a DLNA (DMR) function. Select [Playback on TV]. ● [Wi-Fi] [Wi-Fi Function] [New Connection] [Playback on TV] Connect the camera to the TV via Wi-Fi.
Page 403 14. Wi-Fi/Bluetooth • When you display the pictures on a TV using the Wi-Fi function, they are not output using 4K resolution. To output pictures using 4K resolution, connect this unit to the TV using an HDMI micro cable. (427) •...
Page 404: Sending Images From The Camera
14. Wi-Fi/Bluetooth Sending Images from the Camera Operate the camera to send recorded images to a device connected by Wi-Fi. Operation flow Select the sending method. Select the sending method from the [Send Images While Recording] and [Send Images Stored in the Camera] camera menus.
Page 405 14. Wi-Fi/Bluetooth Refer to the following pages for the steps common to all devices. – Wi-Fi connections: [Via Network] (417)/[Direct] (420) – Image send settings (423) – Selecting images (424) • When recording, recording is prioritized so it will take time for sending to complete.
Page 406 14. Wi-Fi/Bluetooth ™ Images That Can be Sent Images that can be sent differ depending on the destination device. Images that can be sent Destination device [Send Images While [Send Images Stored in Recording] the Camera] JPEG/RAW/MP4 * JPEG/RAW [Smartphone] (408) JPEG/RAW/MP4/ [PC] (411) JPEG/RAW...
Page 407 14. Wi-Fi/Bluetooth ™ Fn Button Assigned with [Wi-Fi] You can perform the following operations by pressing the Fn button assigned with [Wi-Fi] after connecting to Wi-Fi. For information on Fn buttons, refer to page 294. [Terminate the Terminates the Wi-Fi connection. Connection] Terminates the Wi-Fi connection, and allows you to [Change the Destination]...
Page 408 14. Wi-Fi/Bluetooth [Smartphone] Transfer recorded images to a smartphone connected using Wi-Fi. Getting started: • Install “LUMIX Sync” on your smartphone. (378) Select the method for sending the images on the camera. ● [Wi-Fi] [Wi-Fi Function] [New Connection] [Send Images While Recording]/[Send Images Stored in the Camera] Set the destination to...
Page 409 14. Wi-Fi/Bluetooth Check the send settings and then press • To change the send settings of images, press [DISP.]. (423) When [Send Images While Recording] is selected: Take pictures. • [ ] is displayed in the recording screen of the camera while a file is being sent.
Page 410 14. Wi-Fi/Bluetooth ™ Sending Images on the Camera to a Smartphone with Simple Operations You can transfer pictures to a smartphone connected by Bluetooth just by pressing [ ] ([Send Image (Smartphone)]) button during playback. You can also use the menu to connect easily. •...
Page 411 14. Wi-Fi/Bluetooth Using the menu to transfer easily [Bluetooth] [Send Image (Smartphone)] Settings: [Single Select]/[Multi Select] • If [Single Select], press to select the image and then press to execute. • If [Multi Select], use the same operation as with “Send multiple images”. •...
Page 412 14. Wi-Fi/Bluetooth When using Mac (Example for macOS 10.15) Select the destination folder and then click the items in the following order. [File] [Get Info] Enable folder sharing. • Create a PC account name (up to 254 characters) and password (up to 32 characters) consisting of alphanumeric characters.
Page 413 14. Wi-Fi/Bluetooth Connect the camera and PC by Wi-Fi. ● Select [Via Network] (417) or [Direct] (420), and then connect. Enter the computer name of the PC name you want to connect to (for Mac, the NetBIOS name). Select a folder for storing images.
Page 414 14. Wi-Fi/Bluetooth When [Send Images While Recording] is selected: Take pictures. • [ ] is displayed in the recording screen of the camera while a file is being sent. • To end the connection, follow the steps below: [Wi-Fi] [Wi-Fi Function] [Yes] When [Send Images Stored in the Camera] is selected: Select an image.
Page 415 14. Wi-Fi/Bluetooth [AV device] Still pictures and video can be sent to AV devices in the home (home AV devices), such as DLNA compatible recorders. Home AV device Wireless access point Select the method for sending images on the camera. ●...
Page 416 14. Wi-Fi/Bluetooth Check the send settings, and select [Set]. • To change the send setting, press the [DISP.]. (423) When [Send Images While Recording] is selected: Take pictures. • [ ] is displayed in the recording screen of the camera while a file is being sent.
Page 417: Wi-Fi Connections
14. Wi-Fi/Bluetooth Wi-Fi Connections When [New Connection] has been selected in [Wi-Fi Function] in [Wi-Fi] of the [Setup] menu, select the connection method from either [Via Network] or [Direct] to connect. On the other hand, when you use [Select a destination from History] or [Select a destination from Favorite], the camera connects to the selected device with the previously-used settings.
Page 418 14. Wi-Fi/Bluetooth ™ [WPS (Push-Button)] Press the WPS button on the wireless access Example) point to set up a connection. Press the wireless access point WPS button until it switches to WPS mode. ™ [WPS (PIN code)] Enter a PIN code into the wireless access point to set up a connection. On the camera screen, select the wireless access point you are connecting to.
Page 419 14. Wi-Fi/Bluetooth ™ [From List] Searches for a wireless access point to use, and connects to this. • Confirm the encryption key of the wireless access point. Select the wireless access point you are connecting to. • Press [DISP.] to run a wireless access point search again.
Page 420 14. Wi-Fi/Bluetooth [Direct] Directly connect the camera and the destination device. Select the method for connecting with the destination device. Press the WPS button on the destination [WPS (Push- device to connect. Button)] • On the camera, press [DISP.] to extend [WPS the connection wait time.
Page 421 14. Wi-Fi/Bluetooth Connect to Wi-Fi Using Previously Saved Settings Use the Wi-Fi connection history to connect using the same settings as previously. Display the Wi-Fi connection history. ● [Wi-Fi] [Wi-Fi Function] [Select a destination from History]/[Select a destination from Favorite] Select the History item to connect to.
Page 422 14. Wi-Fi/Bluetooth ™ Editing Items Registered in Favorite Display items registered to Favorite. • [Wi-Fi] [Wi-Fi Function] [Select a destination from Favorite] Select the History item to edit in Favorite and then press [Remove from Favorite] — [Change the Order in Specify the destination location of the desired item Favorite] to change the display order.
Page 423: Send Settings And Selecting Images
14. Wi-Fi/Bluetooth Send Settings and Selecting Images Image Send Settings Set the size, file format, and other items for sending the image to the destination device. After Wi-Fi connection, the send settings confirmation screen will be displayed, so press [DISP.]. Change the send settings.
Page 424 14. Wi-Fi/Bluetooth Selecting Images When sending by [Send Images Stored in the Camera], select the images using the following procedure. Select [Single Select] or [Multi Select]. Select the image. [Single Select] setting Press to select an image. Press [Multi Select] setting Press to select an image and then press...
Page 425: [Wi-Fi Setup] Menu
14. Wi-Fi/Bluetooth [Wi-Fi Setup] Menu This configures the settings required for the Wi-Fi function. The settings cannot be changed when connected to Wi-Fi. Displaying the [Wi-Fi Setup] menu. ● [Wi-Fi] [Wi-Fi Setup] This sets either the camera or the smartphone as [Priority of Remote the priority control device to be used during remote Device]...
Page 426: Connecting To Other Devices
Connecting to Other Devices This chapter describes connections with other devices, such as TVs and PCs. [HDMI] socket Connect the camera and TV with a commercially available HDMI micro cable. • Use a “High Speed HDMI micro cable” with the HDMI logo. Cables that do not comply with the HDMI standards will not work.
Page 427: Viewing On A Tv
15. Connecting to Other Devices Viewing on a TV You can connect the camera to a TV to view recorded pictures and videos on the TV. Getting started: • Turn off the camera and TV. Connect the camera and TV with a commercially available HDMI micro cable.
Page 428 Using VIERA Link VIERA Link (HDAVI Control™) is a function that allows you to use your remote control for the Panasonic TV for easy operations when the camera has been connected to a VIERA Link compatible device using an HDMI micro cable for automatic linked operations.
Page 429 Furthermore, when the TV power is in the standby state, it turns on automatically. (When “Power on link” on the TV is set to “Set”) • VIERA Link is a unique Panasonic function built on an HDMI control function using the standard HDMI CEC (Consumer Electronics Control) specification.
Page 430: Recording While Monitoring Camera Images
15. Connecting to Other Devices Recording while monitoring camera images When using the HDMI output, you can take pictures while monitoring the camera image on a TV, etc. • The monitor and viewfinder of the camera will turn off. • When using the AF mode [ ] or MF assist, the screen cannot be enlarged in windowed mode.
Page 431: Importing Images To A Pc
15. Connecting to Other Devices Importing Images to a PC If you connect the camera to a PC, you can copy the recorded images to the PC. • When using Windows, you can also copy using the “PHOTOfunSTUDIO” software for LUMIX. (434) •...
Page 432 15. Connecting to Other Devices ™ Folder Structure Inside Card DCIM: Images DCIM Folder number 100XXXXX LUMIX Color space P: sRGB _: AdobeRGB File number PXXX0001.JPG JPG: JPEG format pictures RW2: RAW format pictures MP4: MP4 videos, 4K burst files...
Page 433: Installing Software
15. Connecting to Other Devices ™ Copying Images to a PC Using “PHOTOfunSTUDIO” Getting started: • Turn on the camera and PC. • Install “PHOTOfunSTUDIO” on PC. (433) Connect the camera and PC with the USB connection cable. (426) Press to select [PC(Storage)] and then press Copy images to the PC using “PHOTOfunSTUDIO”.
Page 434 You can also perform operations such as writing images to a DVD, correcting images, and editing videos. Check the following site and then download and install the software: https://panasonic.jp/support/global/cs/soft/download/d_pfs10ae.html (English only) Download expiration: January 2029 Operating environment Windows 8.1 (32-bit/64-bit)
Page 435 15. Connecting to Other Devices ™ SILKYPIX Developer Studio SE This software processes and edits RAW images. Edited images can be saved in a format (JPEG, TIFF, etc.) that can be displayed on a PC. Check the following site and then download and install the software: http://www.isl.co.jp/SILKYPIX/english/p/ Operating environment Windows 10 (64-bit)
Page 436: Storing On A Recorder
15. Connecting to Other Devices Storing on a Recorder By connecting the camera to a Panasonic Blu-ray disc recorder or DVD recorder, you can store the pictures and videos. Getting started: • Turn on the camera and recorder. Connect the camera and recorder with the USB connection cable.
Page 437: Materials
Materials Using Optional Accessories • For information on the tripod grip, refer to page 72. External Flash (Optional) After attaching the flash (DMW-FL580L, DMW-FL360L, DMW-FL200L: optional), the effective range will be increased when compared to the camera’s built-in flash. Close the built-in flash and set the Camera on/off switch to [OFF].
Page 438: External Microphones (Optional)
16. Materials • When an external flash is attached, do not carry the camera by holding only the external flash. It may become detached. • When using a commercially available external flash, do not use one with reversed polarity or function for communicating with a camera. It may cause the camera to malfunction, or it may not operate correctly.
Page 439 16. Materials • While the external microphone is connected, [ ] is displayed on the screen. Make sure that the external microphone is connected properly before you start recording. • Do not use the stereo microphone cables with the length of 3 m (9.8 feet) or more.
Page 440 16. Materials ™ Setting the Sound Pickup Range (DMW-MS2: Optional) When the Stereo Shotgun Microphone (DMW-MS2: optional) is connected, you can set the microphone sound pickup range. Select [Special Mic.]. ● [Special Mic.] [STEREO] Picks up sound over a wide area. Picks up sound from a range automatically set by the lens [LENS AUTO] angle of view.
Page 441: Ac Adaptor (Optional)/Dc Coupler (Optional)
16. Materials AC Adaptor (Optional)/DC Coupler (Optional) With an AC Adaptor (DMW-AC10: optional) and DC Coupler (DMW- DCC11: optional), you can perform recording and playback without worrying about the remaining battery charge. • Be sure to purchase both an AC Adaptor and a DC Coupler as a set. They cannot be used independently of one another.
Page 442: Monitor/Viewfinder Displays
16. Materials Monitor/Viewfinder Displays • The screen is an monitor display example of when [LVF/Monitor Disp. Set] is set to [ Recording Screen [S&Q Effect] (256) AFS AFF Focus mode (126, 148) AFC MF Recording mode (54) Focus Bracket (201) AF Lock (212) Photo Style (223) AF mode (131)
Page 443 16. Materials Live View Composite Name * recording (103) (353) Travel elapsed days * Multiple exposures (357) (327) Location * (357) [Digital Zoom] (157) Age in years/months * (353) Electronic shutter (204) Current date/time * Travel destination setting * Picture-taking during video recording (Photo (356) Priority) (244)
Page 444 16. Materials Exposure compensation value (210) Connected to Wi-Fi (375) Exposure Bracket (200) Connected to Bluetooth Brightness (exposure) (381) (83, 117) Location logging (399) Manual Exposure Assist (101) Number of pictures that can be taken (477) ISO sensitivity (214) AWBc Number of pictures that AWBw can be taken continuously...
Page 445 16. Materials Light source position Touch Tab (341) ([Sunshine]) (116) Filter effect adjustment Touch Zoom (155) (118, 226) Touch AF, Touch Shutter (70) Filter on/off (226) Touch AE (71) Filter setting (226) Focus Peaking (344) Aperture value (248, 254) Shutter speed (248, 254) Exposure compensation (248, 254) Self Shot Mode (85)
Page 446 16. Materials ™ Monitor recording information screen 1/60 F3.5 [Aspect Ratio] (119)/ [Picture Size] (120) Recording mode (54) 1/60 [S&Q Effect] (256) Shutter speed (52) F3.5 Wi-Fi/Bluetooth Aperture value (52) connection state (375) Battery indication (35) Fn button settings (294) ISO sensitivity (214) Photo Style (223) Exposure compensation...
Page 447: Playback Screen
16. Materials Playback Screen 15 pic. 15 pic. 1ST DAY 1ST DAY 11 months 20 days 11 months 20 days Icon indicating the Playback mode (365) presence of a marker Protected picture (366) (172, 174) Location logging (399) 4K Photo (4K burst file) Rating (366) (164) Video playback (274)
Page 448 16. Materials Name * Clear Retouch completed (353, 355) icon (286) Location * (357) Obtaining information Title * (367) Playback (Video) (274) Age in years/months (353, 355) Travel elapsed days 1ST DAY (357) Recording information Group images (280) Silent mode (203) 1 It is displayed in order of [Title], [Location], [Name] ([Baby1]/[Baby2], [Pet]), [Name] ([Face Recog.]).
Page 449 16. Materials Photo style, Detailed information display Highlight shadow display Standard Contrast Sharpness Noise Reduction Saturation 2020.12.1 10:00 2020.12.1 10:00 100-0001 100-0001 White balance display Recording information (basic) Recording date and time (47) Auto White Balance Folder/file number (432) Recording information (advanced) 2020.12.1 10:00 100-0001 Histogram display...
Page 450: Message Displays
16. Materials Message Displays Meanings of main messages displayed on the camera screen, and response methods. ™ Card [Memory Card Error]/[Format this card?] • It is a format that cannot be used with the camera. Either insert another card, or back up any necessary data before formatting. (40) [Memory Card Error]/[This memory card cannot be used] •...
Page 451 [This battery cannot be used] • Use a genuine Panasonic battery. If this message is displayed even when a genuine Panasonic battery is used, contact the dealer. • If the terminal of the battery is dirty, remove the dirt and dust from the terminal.
Page 452 16. Materials ™ Others [Some pictures cannot be deleted]/[This picture cannot be deleted] • Images that do not comply with the DCF standard cannot be deleted. Back up any necessary data before formatting the card. (40) [A folder cannot be created] •...
Page 453: Troubleshooting
16. Materials Troubleshooting First, try out the following procedures (453 to 463). If the problem is not resolved, it may be improved by selecting [Reset] (69) on the [Setup] menu. Power, Battery The camera turns off automatically. • [Economy] is enabled. (37) The battery becomes flat too quickly.
Page 454 16. Materials Cannot record images. The shutter will not operate immediately when the shutter button is pressed. • If [Focus/Release Priority] is set to [FOCUS], then recording will not take place until focus is achieved. (336) The recorded image is whitish. •...
Page 455 16. Materials The recorded image looks rough. Noise appears on the picture. • Try the following: – Reduce the ISO sensitivity. (214) – Increase [Noise Reduction] of [Photo Style] to the positive direction, or adjust each item other than [Noise Reduction] to the negative direction. (224) –...
Page 456 16. Materials The brightness or coloring of the recorded image is different from the actual scene. • When recording under lighting such as fluorescent or LED lighting, increasing the shutter speed may introduce slight changes to brightness or coloring. These are a result of the characteristics of the light source and do not indicate a malfunction.
Page 457 When the lens is attached to another digital camera, manual focus operation cannot be performed. • You can use Manual Focus with the interchangeable lens (H-FS12032) only if your model is compatible with the lens. Refer to the support website below for details: https://panasonic.jp/support/global/cs/dsc/ (This Site is English only.)
Page 458 16. Materials Playback Cannot play back. There are no recorded pictures. • Folders and images processed on a PC cannot be played on the camera. We recommend using the software “PHOTOfunSTUDIO” to write images from the PC to the card. •...
Page 459 16. Materials Flash The flash does not fire. • The flash becomes unavailable in the following cases. – The flash is closed. – Flash set to [ ] (Forced Flash Off). (231) • The flash does not fire when using the following functions: –...
Page 460 16. Materials Wi-Fi Function A Wi-Fi connection cannot be established. Radio waves get disconnected. Wireless access point is not displayed. General tips for using a Wi-Fi connection • Use within the communication range of the device to be connected. • Usage near devices that utilize the 2.4 GHz frequency such as microwave ovens and cordless telephones may result in the radio wave being lost.
Page 461 16. Materials Connection to a wireless access point cannot be established. • The wireless access point information set on the camera is wrong. Check the authentication type and encryption key. (419) • Radio waves from other devices may block the connection to a wireless access point.
Page 462 16. Materials The PC is not recognized when I use a Wi-Fi connection. The camera cannot be connected to the PC using the Wi-Fi function. • At the time of purchase, this camera is set to use a workgroup name of “WORKGROUP”.
Page 463 16. Materials TV, PC No image on the TV. The TV screen is blurry or not colored. • Confirm the connection with the TV. (427) VIERA Link is not working. • Check that the [VIERA Link] of the camera is set to [ON]. (362) •...
Page 464: Cautions For Use
16. Materials Cautions for Use ™ The camera Keep this unit as far away as possible from electromagnetic equipment (such as microwave ovens, TVs, video games etc.). • If you use this unit on top of or near a TV, the pictures and/or sound on this unit may be disrupted by electromagnetic wave radiation.
Page 465 16. Materials Do not spray the camera with insecticides or volatile chemicals. • If the camera is sprayed with such chemicals, the body of the camera may be damaged and the surface finish may peel off. Do not keep products made of rubber, PVC or similar materials in contact with the camera for a long period of time.
Page 466 • Do not use any objects except a blower brush to clean the image sensor. • If you cannot remove the dirt or dust with the blower, consult the dealer or Panasonic. ™ Cleaning the Viewfinder • As the eye cup cannot be removed, blow away the dust on the viewfinder surface with a blower (commercially available), gently wipe it with a dry and soft cloth, and be careful not to remove it.
Page 467 16. Materials ™ Lens • Do not press the lens with excessive force. • Do not leave the camera with the lens facing the sun as rays of light from the sun may cause it to malfunction. Also, be careful when placing the camera outside or near a window.
Page 468 16. Materials ™ Battery The battery is a rechargeable lithium ion battery. It is highly sensitive to temperature and humidity, and the effect on performance increases as the temperature rises or drops. Keep the contacts of the charger and battery clean.
Page 469 16. Materials ™ AC Adaptor • The [CHARGE] light may blink under the influence of static electricity or electromagnetic wave, depending on the charging environment. This phenomenon has no effects on charging. • If you use the AC adaptor near a radio, the radio reception may be disturbed. Keep the AC adaptor 1 m (3.3 feet) or more away from radio.
Page 470 Please note in advance that Panasonic is not liable in any way for any direct or indirect damage from the alteration or vanishing of information or personal information.
Page 471 Image Data • Recorded data may be damaged or lost if the camera breaks down due to inappropriate handling. Panasonic will not be liable for any damage caused due to loss of recorded data. ™ Tripod/Unipod • Make sure the tripod/unipod is stable when the camera is attached to it.
Page 472 There is the risk that the camera violates the radio wave regulations if used in countries other than those where it is sold, and Panasonic takes no responsibility for any violations. There is the risk that data sent and received via radio waves may be...
Page 473 16. Materials Do not connect to the wireless network you are not authorized to use When the camera utilizes its wireless LAN function, wireless networks (SSID) that you are not authorized to use may be displayed, however do not attempt to connect to the network as it may be considered as an unauthorized access.
Page 474: Number Of Pictures That Can Be Taken And Available Recording Time With The Battery
• The number of pictures that can be taken is according to the CIPA (Camera & Imaging Products Association) standards. • Using a Panasonic SDHC memory card. • The values listed are approximate. ™...
Page 475 16. Materials ™ Recording Videos (When Using the Monitor) • Recording with picture quality set to [4K/100M/30p] or [4K/100M/25p]. When the interchangeable lens (H-FS12032) is used Continuous available recording time (minutes) Actual available recording time (minutes) When the interchangeable lens (H-FS45150) is used Continuous available recording time (minutes) Actual available recording time (minutes) •...
Page 476 16. Materials ™ Playback (When Using the Monitor) When the interchangeable lens (H-FS12032) is used Playback time (minutes) When the interchangeable lens (H-FS45150) is used Playback time (minutes) • The number of pictures that can be taken and the available recording time vary depending on the surrounding environment and the usage conditions.
Page 477: Number Of Still Images That Can Be Taken And Video Recording Time With Cards
16. Materials Number of Still Images That Can Be Taken and Video Recording Time with Cards Listed below are the numbers of pictures and the time lengths of videos that can be recorded on a card. • The values listed are approximate. ™...
Page 478: List Of Functions That Can Be Set In Each Recording Mode
16. Materials List of Functions That Can Be Set in Each Recording Mode Menu [Rec] menu [Aspect Ratio] [Picture Size] [Quality] [Focus Mode] [AF Sensitivity(Photo)] [Photo Style] [Filter Effect] [Filter Settings] [Simultaneous Record w/o Filter] [Color Space] [Metering Mode] [Highlight Shadow] [i.Dynamic] [i.Resolution] [Flash]...
Page 479 16. Materials Menu [ISO Auto Lower Limit Setting] [ISO Sensitivity (photo)] [ISO Auto Upper Limit Setting] [Min. Shtr Speed] [Long Shtr NR] [Shading Comp.] [Diffraction Compensation] [Operation Mode] [Stabilizer] [E-Stabilization (Video)] [Ex. Tele Conv.] ([Rec]) [Digital Zoom] [Burst Rate] [Rec Method] [4K PHOTO] [Pre-Burst Recording] [Self Timer]...
Page 480 16. Materials Menu [Motion Picture] Menu [Rec Quality] [Snap Movie] [Focus Mode] [Continuous AF] [AF Custom Setting(Video)] [Photo Style] [Filter Effect] [Filter Settings] [Simultaneous Record w/o Filter] [Luminance Level] [Metering Mode] [Highlight Shadow] [i.Dynamic] [i.Resolution] [ISO Auto Lower Limit Setting] [ISO Sensitivity (video)] [ISO Auto Upper Limit...
Page 481 16. Materials Menu [Wind Cut] * [Lens Noise Cut] * [Built-in Mic] [Built-in Mic Indicator] [Special Mic.] * 1 This item is available only when using an external microphone (optional). 2 This item is available only when using an interchangeable lens supporting power zoom.
Page 482: Specifications
16. Materials Specifications The specifications are subject to change for performance enhancement. Digital camera body (DC-G100D): Information for your safety Power source: 8.4 V Power consumption: 2.9 W (when recording with the monitor), 2.0 W (when playing back with the monitor) <When using the interchangeable lens (H-FS12032)>...
Page 483 16. Materials Picture size When the aspect ratio setting is [4:3] (pixels) [L]: 5184×3888, [M]: 3712×2784, [S]: 2624×1968 4K photo: 3328×2496 When the aspect ratio setting is [3:2] [L]: 5184×3456, [M]: 3712×2480, [S]: 2624×1752 4K photo: 3504×2336 When the aspect ratio setting is [16:9] [L]: 5184×2920, [M]: 3840×2160, [S]: 1920×1080 4K photo: 3840×2160 When the aspect ratio setting is [1:1]...
Page 484 16. Materials Monitor System Aspect ratio 3:2, 3.0 inches, approx. 1,840,000 dots monitor, capacitive touch screen (field of view ratio about 100%) Focus AF type TTL type based on image detection (Contrast AF) Focus mode AFS / AFF / AFC / MF AF mode Face/Eye Detection, Tracking, 49-area-focusing, Custom Multi, 1-area-focusing, Pinpoint-focusing...
Page 485 With RAW files: 20 frames or more (When recording is performed under the test conditions specified by Panasonic) Minimum illumination Approx. 9 lx (when i-Low light is used, the shutter speed is 1/25th of a second) <When the Interchangeable lens (H-FS12032) is used>...
Page 486 16. Materials Flash Flash TTL AUTO Built-in pop up flash GN 5.1 equivalent (ISO200·m) [GN 3.6 equivalent (ISO100·m)] Flash mode Auto, Auto/Red-Eye, Forced Flash On, Forced On/Red-Eye, Slow Sync., Slow Sync./Red-Eye, Forced Flash Off Flash synchronization Equal to or smaller than 1/50 of a second speed Flash range Approx.
Page 487 16. Materials External dimensions / Mass External dimensions Approx. 115.6 mm (W)×83.1 mm (H)×54.2 mm (D) (4.55″ (W)×3.27″ (H)×2.13″ (D)) (excluding the projecting parts) Mass Approx. 346 g/0.76 lb (with one card and the battery) Approx. 304 g/0.67 lb (only camera body) Operating environment Recommended operating...
Page 488 16. Materials Interchangeable H-FS12032 H-FS45150 Lens “LUMIX G VARIO “LUMIX G VARIO 12–32 mm/F3.5–5.6 ASPH./ 45–150 mm/F4.0–5.6 MEGA O.I.S.” ASPH./MEGA O.I.S.” Focal length f=12 mm to 32 mm (35 mm f=45 mm to 150 mm (35 mm film camera equivalent: film camera equivalent: 24 mm to 64 mm) 90 mm to 300 mm)
Page 489 16. Materials Recommended 0 °C to 40 °C (32 °F to 0 °C to 40 °C (32 °F to operating 104 °F) 104 °F) temperature Permissible relative 10%RH to 80%RH 10%RH to 80%RH humidity Tripod grip: DMW-SHGR2 Carrying capacity (Total mass of the loading camera Maximum 1.2 kg/2.65 lb body, lens, battery,...
Page 490: Index
Index Numerics Appetizing Food........Artistic Nightscape ......110 1-Area (AF) ........Aspect Ratio .......119, 49-Area (AF) ........Auto Clock Set ......358, 4K Burst ..........Auto exposure compensation ..235, 4K Burst (Wide-angle) ......Auto focus.......... 4K burst files ........Auto LVF/Monitor Off ....37, 4K Burst (S/S)........
Page 491 Index Custom Mode menu ......Custom set memory ....305, Calendar Playback ......Cute Dessert........Card ........24, 39, Center Marker........Center-weighted metering ....DC Coupler ........Charge ..........DCF standard ........Cinelike D .......... Defocus control function ....84, Cinelike V .......... Delete ..........
Page 492 Index Exposure Meter ......... Focus/Release Priority ...... Exposure Mode ......246, Folder number ... 123, 125, 432, Expressive ..........114 Folder/File Settings....123, Extended ISO ........Forced Flash Off ........ Extended Tele Conversion Format ......... 40, ........... 154, 323, Frame Marker ......270, External flash ........
Page 493 Index iHDR ..........81, LVF Display Speed ......Image Quality ........LVF Luminance ........Image Stabilizer ......206, LVF/Monitor Display Set ....Impressive Art ........114 LVF/Monitor Display Style ....Intelligent Auto menu ......LVF/Monitor Switch ......Intelligent Auto mode ......Intelligent Auto Plus Mode ....
Page 494 Index Number of pictures that can be taken Program AE mode ..................Program Shift........Number of pictures that can be taken Protect ..........continuously........Number of still images that can be taken Q.MENU ......63, 301, ............Quality ........121, Quick AF ..........
Page 495 Index Rotate ..........Simultaneous Record w/o Filter Rotate Display ................113, 227, Rough Monochrome ......114 Sleep Mode ......... 37, Sleep Mode (Wi-Fi)...... 37, Slide show ......... S&Q Effect ......... Slow & Quick Menu ....255, S&Q Exposure Mode ......Slow & Quick Mode ......S&Q Recording Frame Rate....
Page 496 Index Touch Zoom ........Wi-Fi Function ......357, Toy Effect ..........114 Wi-Fi Function Lock ......Pop..........114 Wi-Fi network settings ....... Tracking (AF) ....... 80, Wi-Fi Password ......... Travel Date ........Wi-Fi Setup menu ...... 357, Tripod ..........Wind Cut ........332, Tripod grip ...........
Page 497: Trademarks And Licenses
® are registered trademarks of USB Implementers Forum. • HDAVI Control™ is a trademark of Panasonic Holdings Corporation. • Adobe is a trademark or registered trademark of Adobe Systems Incorporated in the United States and/or other countries. • Pentium is a trademark of Intel Corporation in the U.S. and/or other countries.
Page 498 • The Bluetooth word mark and logos are registered trademarks owned by ® Bluetooth SIG, Inc. and any use of such marks by Panasonic Holdings Corporation is under license. Other trademarks and trade names are those of their respective owners.
Page 499 Trademarks and Licenses This product is licensed under the AVC Patent Portfolio License for the personal use of a consumer or other uses in which it does not receive remuneration to (i) encode video in compliance with the AVC Standard (“AVC Video”) and/or (ii) decode AVC Video that was encoded by a consumer engaged in a personal activity and/or was obtained from a video provider licensed to provide AVC Video.
Page 500 Disposal of Old Equipment and Batteries Only for European Union and countries with recycling systems These symbols on the products, packaging, and/or accompanying documents mean that used electrical and electronic products and batteries must not be mixed with general household waste. For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable collection points in accordance with your national legislation.

Panasonic LUMIX DC-G100D Operating Instructions Manual

Quick Links

Related Manuals for Panasonic LUMIX DC-G100D

Summary of Contents for Panasonic LUMIX DC-G100D