Table of Contents
Advertisement
10. Using the Wi-Fi function
Sending images to a smartphone/tablet
Preparations
• Install the "Image App" in advance.
1
Select the menu.
>
[Setup] > [Wi-Fi] > [Wi-Fi Function] > [New Connection] >
MENU
[Send Images While Recording] or [Send Images Stored in the Camera] >
[Smartphone]
2
Select [Via Network] or [Direct], and connect.
On your smartphone
When connecting with [Via Network]:
1 Turn on the Wi-Fi function.
2 Select the wireless access point you want to connect to, and set.
3 Start "Image App".
When connecting with [WPS Connection] in [Direct]:
1 Start "Image App".
When connecting with [Manual Connection] in [Direct]:
1 Turn on the Wi-Fi function.
2 Select the SSID that matches the one displayed on the screen of this unit.
3 Start "Image App".
3
Select a device you want to connect.
4
Check the send settings, and select [Set].
• To change the send setting, press [DISP.].
5
When [Send Images While Recording] has been selected
Take pictures.
When [Send Images Stored in the Camera] has been selected
Select the picture.
(P248)
(P50)
(P248)
(P248)
(P248)
(P260)
(P261)
(P276)
(P262)
263
Advertisement
Table of Contents
