Table of Contents
Advertisement
2. Getting Started/Basic Operations
Inserting and Removing the Card (optional)
• Check that this unit is turned off.
1
1: Slide the release lever in the
direction of the arrow.
2: Open the card/battery door.
• Always use genuine Panasonic
batteries.
• If you use other batteries, we cannot
guarantee the quality of this product.
2
Push it securely all the way until
you hear a "click" while being
careful about the direction in
which you insert it.
To remove the card, push the card
until it clicks, then pull the card
out upright.
A: Do not touch the connection terminals of the card.
3
1: Close the card/battery door.
2: Slide the release lever in the
direction of the arrow.
• Turn the camera off and wait for the "LUMIX" display on the monitor to clear before removing
the card.
(Otherwise, this unit may no longer operate normally and the card itself may be damaged or
the recorded pictures may be lost.)
27
Advertisement
Table of Contents
