Broadcast-Limit; Bandwidth-Limit - ZyXEL Communications VDSL SWITCH VES-1616F-3X User Manual

Chapter 33 Command Examples
An example is shown next.
• Enable ports one, three, four and five for configuration.
• Set the BPDU control to
and five.
sysname(config)# interface port-channel 1,3-5
sysname(config-interface)# bpdu-control tunnel
sysname(config-interface)#

33.9.3 broadcast-limit

Syntax:
broadcast-limit
broadcast-limit <pkt/s>
where
<pkt/s>
An example is shown next.
• Enable port one for configuration.
• Enable broadcast control.
• Set the number of broadband packets the interface receives per second.
sysname(config)# interface port-channel 1
sysname(config-interface)# broadcast-limit
sysname(config-interface)# broadcast-limit 21

33.9.4 bandwidth-limit

Syntax:
bandwidth-limit
bandwidth-limit egress <Kbps>
bandwidth-limit ingress <Kbps>
where
<Kbps>
An example is shown next.
• Enable port one for configuration.
• Enable bandwidth control.
• Set the outgoing traffic bandwidth limit to 7Mbps.
254
, to forward BPDUs received on ports one, three, four
tunnel
Enables broadcast storm control limit on the switch.
Sets how many broadcast packets the interface receives per second.
Enables bandwidth control on the switch.
Sets the maximum bandwidth allowed for outgoing traffic (egress) or
incoming traffic (ingress) on the switch.
VES-1616F-3x Series User's Guide