Wired Handset Extension Cables; Wired Speaker Connection; Nmea 2000 / Seatalkng ® Connection - Raymarine RAY91 Installation And Operation Instruction Manual

4. Tighten locking collars by Rotating clockwise.

Wired handset extension cables

Handset station cabling can be extended using approved extension cables.
The maximum length of cable from the Handset to the Base station should not exceed 50 m (164 ft)

4.5 Wired speaker connection

A wired speaker can be connected to a wired handset station using the RCA audio connector,
available on the Handset adaptor cable.
1. Wired handset adaptor cable 400 mm (1.3 ft) (1 x supplied and available as an accessory: A80297)
2. Wired speaker (1 x supplied and available as an accessory: A80542)
The wired speaker includes a 2m (6.56 ft) audio cable terminated with a male RCA connector.
4.6 NMEA 2000 / SeaTalkng ® connection
Your product can transmit data to devices connected on SeaTalkng ® or NMEA 2000 CAN bus
networks. Connection is established using the DeviceNet connector located on the bottom of the unit.
1. Use the supplied DeviceNet to SeaTalkng ® adaptor to connect your product to your SeaTalkng ®
backbone using available SeaTalkng ® spur cables.
Cables and connections 55