Raymarine RAY91 Installation And Operation Instruction Manual page 44

Table of Contents

Advertisement

1. Using the supplied mounting template, mark the location of the fixing holes on the mounting
surface.
2. Drill holes for the mounting fixings using a drill with a suitable sized drill bit.
3. Screw the fixings approximately half way into the holes in the mounting surface.
4. Place the Wireless hub over the fixing screws and push down to lock into positions
5. Fully tighten the screws.
6. Connect the antenna to the top of the hub.
44

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ray90

Table of Contents