Checking Software Versions; Ray90/Ray91 Software; Performing Software Updates - Raymic Handset - Raymarine RAY91 Installation And Operation Instruction Manual

• Please refer to the operation instructions for your MFD / operating system version for details on
how to perform the software update, alternatively refer to the instructions provided on the software
download area for your product on the Raymarine website: ww.raymarine.com/software.
• The MFD used to perform the software update must be the designated Data master and be
connected / networked to the product being updated.
• If you are in any doubt as to the correct procedure for updating your product software, please refer
to your local authorized dealer or Raymarine technical support for assistance.
Caution: Installing software updates
• The software update process is carried out at your own risk. Before initiating
the update process ensure you have backed up any important files.
• Ensure that the unit has a reliable power supply and that the update process
is not interrupted.
• Damage caused by an incomplete update is not covered by Raymarine warranty.
• By downloading the software update package, you agree to these terms.

Checking software versions

You can check the software version of your radio and connected components.
From the Homescreen:
1. Select Menu > Set-up > Maintenance > About this unit.
2. Scroll down.
Software versions of connected components are displayed.

Ray90/Ray91 software

The following Ray90/Ray91 components include software that can be updated:
• Base station
• Wired handsets
• Wireless hub
• Wireless handsets
Performing the software update process using a compatible MFD will update the software for all
connected components.
Note:
• Prior to performing the software update process, ensure that all components are powered on
and that any Wireless handsets are plugged into their charging holsters.
• Wired handsets that contain software versions below VH1.32 must be placed into software
update mode and updated separately form the Base station.
Performing software updates — Raymic handset
If your wired handset is running software version V1.32 or above then the handset will be updated
automatically at the same time as the Base station. If you handset is running a software version below
V1.32 then your Base station and handset must be updated separately.
• The radio must be connected to a compatible MFD over SeaTalkng ®.
• The Data master MFD must be used to perform software update.
• Once you have updated your Base station software follow the steps below to update your handset.
1. Ensure a memory card that contains the necessary software files is inserted into the card reader
of your MFD.
2. With the Radio's Base station powered on, turn off the Raymic Handset by pressing the Power
button located on the top of the Handset.
3. Press and hold the Distress and PTT buttons on the Handset.
Document and product information
27