Shifting - Yamaha MTM690 2022 Owner's Manual

Operation and important riding points
NOTICE
Do not ride through deep water, oth-
erwise the engine may be damaged.
Avoid puddles because they may be
deeper than expected.
6
EAUN0073

Shifting

ECAN0072
6 6
5 5
4 4
1 1 3 3
2 2
N N
1 1
1. Gear positions
2. Shift pedal
Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing hills,
etc.
The gear positions are shown in the il-
lustration.
TIP
To shift the transmission into the neu-
tral position ( ), press the shift pedal
down repeatedly until it reaches the
end of its travel, and then slightly raise
it.
EAU16675
NOTICE
 When shifting, press the shift
 Even with the transmission in
2 2 2
 Always use the clutch while
To start out and accelerate
1. Pull the clutch lever to disengage
2. Shift the transmission into first
6-3
pedal firmly until you feel the
gear shift is complete.
the neutral position, do not
coast for long periods of time
with the engine off, nor tow the
motorcycle for long distances.
The transmission is properly lu-
bricated only when the engine is
running. Inadequate lubrication
may damage the transmission.
changing gears to avoid dam-
aging the engine, transmission,
and drive train, which are not
designed to withstand
shock of forced shifting.
the clutch.
gear. The neutral indicator light
should go out.
ECA10262
the
EAU85370