Yamaha MTM690 2022 Owner's Manual page 27

To switch between "km/L" and "L/100
km" hold the "TRIP" switch/button B
while the instantaneous fuel consump-
tion is visible on the display.
TIP
If traveling at speeds under 20 km/h
(12 mi/h), "_ _._" is displayed.
Average fuel consumption display
ZAUM1336
1. Average fuel consumption display
This function calculates the average
fuel consumption since it was last re-
set. The average fuel consumption can
be set to either "AVE_ _._ km/L", "AVE_
_._ L/100 km" or "AVE_ _._ MPG".
 "AVE_ _._ km/L": The average dis-
tance that can be traveled on 1.0 L
of fuel.
 "AVE_ _._ L/100 km": The average
amount of fuel necessary to travel
100 km.
 "AVE_ _._ MPG": The average dis-
tance that can be traveled on 1.0
Imp.gal of fuel.
To switch between "AVE_ _._ km/L"
and "AVE_ _._ L/100 km" hold the
"TRIP" switch/button B while the aver-
EAU95480
age fuel consumption is visible on the
display.
To reset the average fuel consumption
display: hold the "INFO" switch/button
A for one second while the average fuel
consumption is visible on the display.
TIP
1
After resetting the average fuel con-
sumption display, "_ _._" will be shown
until the vehicle has traveled 1 km (0.6
mi).
Instrument and control functions
Coolant temperature display
ZAUM1337
1. Coolant temperature display
This display shows the coolant tem-
perature from 40 °C to 116 °C in 1 °C
increments.
If the message "Hi" flashes, stop the
vehicle, then stop the engine, and let it
cool. (See page 7-37.)
TIP
 When the coolant temperature is
 The coolant temperature varies
4-9
below 40 °C, "Lo" will be dis-
played.
with changes in the weather and
engine load.
EAU90900
4
1