Yamaha MTM690 2022 Owner's Manual page 28

Instrument and control functions
Air temperature display
4
ZAUM1338
1. Air temperature display
This display shows the air temperature
from –9 °C to 99 °C in 1 °C increments.
The temperature displayed may vary
from the actual ambient temperature.
TIP
When the temperature is below –9 °C,
"Lo" will be displayed.
EAU90923
Clock
1
ZAUM1339
1. Clock
The clock uses a 12-hour time system.
To set the clock
1. Press button A and button B to-
gether for 2 seconds until the hour
digits start flashing.
2. Use the "INFO" switch/button A to
set the hours.
3. Press the "TRIP" switch/button B
to confirm the hour setting and the
minute digits will start flashing.
4. Use the "INFO" switch/button A to
set the minutes.
5. Press the "TRIP" switch/button B
to confirm the settings.
4-10
EAU94293
TIP
 You can check the time even
when the vehicle is off by pressing
button B.
 The "TRIP/INFO" switch cannot
be used to enter the clock setting
mode.
1
Brightness control mode
1. Brightness level display
The brightness control mode allows
you to adjust the brightness level of the
display.
To adjust the display brightness:
1. Turn the main switch to "OFF".
2. Hold button B.
EAU94351
1