Indicator Lights And Warning Lights - Yamaha MTM690 2022 Owner's Manual

TIP
If the steering will not lock, try turning
the handlebars back to the right slight-
ly.
To unlock the steering
1 2
1. Push.
2. Turn.
Push the key in and turn it to "OFF".
Instrument and control functions
Indicator lights and warning
lights
1. ABS warning light " "
2. Engine trouble warning light "
3. Coolant temperature warning light "
4. Oil pressure warning light "
5. Left turn signal indicator light "
6. Neutral indicator light " "
7. High beam indicator light "
8. Right turn signal indicator light "
9. Immobilizer system indicator light "
Turn signal indicator lights "
and " "
Each indicator light will flash when its
corresponding turn signal lights are
flashing.
4-3
EAU4939S
Neutral indicator light "
This indicator light comes on when the
transmission is in the neutral position.
High beam indicator light "
This indicator light comes on when the
high beam of the headlight is switched
on.
Oil pressure warning light "
This warning light comes on if the en-
gine oil pressure is low.
"
TIP
"
"
When the vehicle is turned on, the light
"
should come on, go off briefly, and
then remain on until the engine is start-
"
ed. Otherwise, have a Yamaha dealer
"
check the vehicle.
"
NOTICE
EAU88280
"
If the warning light comes on when
the engine is running, stop the en-
gine and check the oil level. If the oil
level is low, add sufficient oil of the
recommended type. If the warning
EAU88300
"
EAU88310
"
4
EAU94230
"
ECA21211