Maintenance - Panasonic ER-GD61 Operating Instructions Manual

1
Turn the dial and adjust the
trimming height indication mark
( ) to the desired height.
b
• Trimming height:
approx. 0.5 mm to 10 mm
2
Apply the flat part of the comb against your
skin and cut your beard by combing it left and
right.
Detail trimming attachment
• Use the attachment for trimming narrow areas and for
detailed trimming.
Place the blade horizontally
against the skin and
towards the beard line trim
slowly.
Trim gradually from the
ends by bringing the blade
in contact with the skin.
12
PB018141 - ER-GD61 _(01GB)_08-30-19.indd 12

Maintenance

Cleaning
b
• Clean the main body and the blade after each use.
(If not cleaned, the motion will become poor and the
sharpness will worsen.)
• Do not use thinner, benzine, alcohol or other
chemicals. Doing so may cause failure, cracking or
discoloration of the main body. Wipe the main body
Flat part of the comb
only with a soft cloth slightly dampened with tap water
or soapy tap water.
• Make sure that the main body is turned off.
• Remove the main body from the AC adaptor.
2019/8/30 14:18:36