Parts Identification; Preparation - Panasonic ER-GD61 Operating Instructions Manual

Parts identification

A B

E




Main body
1 Power switch
2 Charge status lamp
( )
3 Appliance socket
4 Blade
Trimming height
comb attachment
5 Dial
6 Trimming height
indication mark
PB018141 - ER-GD61 _(01GB)_08-30-19.indd 9
D
C


F G


™
H
Detail trimming
attachment
Protective cap
AC adaptor (RE9-86)
7 Adaptor
8 Power plug
9 Cord
0 Appliance plug
Accessories
Cleaning brush
Oil
Pouch

Preparation

Charging
• Make sure that the main body is turned off.
1
Connect the appliance plug
to the appliance socket.
2
Plug in the adaptor into a
household outlet.
• Check that the charge status
lamp ( ) glows.
• Charging is completed after
approx. 1 hour.
3
Disconnect the adaptor when the charge status
lamp stops glowing.
(for safety and to reduce energy usage)
<How to check if the charging is completed>
Remove and reinsert the appliance plug. If the
charge status lamp glows and turns off after
approximately 5 seconds, it is completed.
Notes
• To keep charging the battery will not affect battery
performance.
• If there is noise from the radio or other sources while
using or charging the appliance, move to a different
location to use the appliance.
• When the appliance is not used for 6 months or more,
the battery will weaken (leak battery fluid, etc.). Fully
charge the battery once every 6 months.
2
1
9
2019/8/30 14:18:32