Blade Maintenance - Panasonic ER 508 Operating Instructions Manual

Blademaintenance
The following is the symbol for a washable clipper. The
symbol means the hand‑held part may be cleaned under
water.
Mountingandremovaloftheblade
1.Holdtheclipperwiththe"Panasonic"
markfacingupwardandpushtheblade
withyourthumbwhilecatchingthe
bladeinyourotherhand.
• Be sure to set the switch to "0•charge"
before you remove the blade.
2.Toremounttheblade,fit
themountinghookinto
theblademountingon
theclipperandpushin
untilitclicks.
►
Bladelife
Blade life will vary according to the frequency and length of use. It
is expected to be about 6 years when using the clipper twice a
month for 0 minutes each time. If cutting efficiency is reduced
despite proper maintenance, change the blades.
►
Batterylife
Battery life will vary according to the frequency and length of use.
If the batteries are charged 6 times a month, the service life will be
approximately 3 years.
• It is recommended that the clipper be recharged at least every 6
months even when not in regular use because the charge will
drain from the batteries and their service life may be shortened.
Cleaningtheblade
►
Ifwashinginwater
Warning ‑ Detach the hand held part from the power cord before
cleaning it in water.
1.Rinseoffanyhairs
stickingtothebladeand
anyhairsinsidethe
clipper.
2.Shaketheclipper4or5
timesgently,wipeoffany
waterdropsfromthe
clipperandblade,and
thenletitdryontoatowel
withthe"Washable"
indicatorfacingupward.
5