Panasonic ER-GD61 Operating Instructions Manual page 13

►With water
To remove light dirt
1. Remove the
attachment and turn the
main body on.
(See page 11.)
2. Run water down the
water inlet at the back
of the main body, rinse
thoroughly for
approximately 20
seconds, and then turn
the main body off.
• Shake up and down several times to remove the
water.
• Be careful not to hit the main body on the sink or
any other object while draining the water. Failure to
do so may cause malfunction.
PB018141 - ER-GD61 _(01GB)_08-30-19.indd 13
To remove heavy dirt
1. Remove the
attachment and blade.
(See pages 11 and 14.)
2. Clean the main body,
the blade and the
attachments with
running water.
3. Wipe off the water with a towel
and let it dry naturally.
• It will dry faster with the blade
removed.
4. Apply the oil to the blade after
drying. (See page 14.)
5. Attach the blade and the
protective cap to the main body.
• Be sure to place the protective
cap on the main body to
protect blade when storing.
►With the brush
1. Remove the attachment and blade.
(See pages 11 and 14.)
2. Clean the main body using the brush.
3. Clean the blade using the
brush.
• Keep pressing down the
cleaning lever ( ) to raise
c
the moving blade ( ) when
d
cleaning between the
stationary blade ( ) and the
e
moving blade.
4. Apply the oil to the blade. (See page 14.)
5. Attach the blade and the protective cap to the main
body.
• Be sure to place the protective cap on the main
body to protect blade when storing.
c
e
d
13
2019/8/30 14:18:38