Table of Contents
Advertisement
Appendix A
Specifications
Maximum Working Voltage
Environmental
Safety
Electromagnetic Compatibility
Note
For full EMC compliance, you must operate this device with shielded cabling.
In addition, all covers and filler panels must be installed. Refer to the Declaration of
Conformity (DoC) for this product for any additional regulatory compliance information.
DAQCard-1200 User Manual
Maximum working voltage refers to the signal voltage plus the
common-mode voltage.
Channel-to-earth .....................................30 VAC or 60 VDC,
Channel-to-channel.................................30 VAC or 60 VDC,
Operating temperature ............................0 to 50 °C
Storage temperature ................................–55 to 150 °C
Humidity .................................................5% to 90% RH, noncondensing
Maximum altitude...................................2000 meters
Pollution degree (indoor use only) .........2
The DAQCard-1200 meets the requirements of the following standards for
safety and electrical equipment for measurement, control, and laboratory
use:
•
EN 61010-1:1993/A2:1995, IEC 61010-1:1990/A2:1995
•
UL 3111-1:1994
•
CAN/CSA c22.2 no. 1010.1:1992/A2:1997
CE, C-Tick, and FCC Part 15 (Class A) Compliant
Electrical emissions ................................EN 55011 Class A at 10 m
Electrical immunity ................................Evaluated to EN 61326:1997/
installation category I
installation category I
FCC Part 15A above 1 GHz
A1:1998, Table 1
A-8
ni.com
Advertisement
Table of Contents
