Table of Contents
Advertisement
Speakers
Description
Speaker Kit, includes the cable
IMPORTANT:
and replacement.
Before removing the speakers, follow these steps:
1.
Shut down the computer.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
4.
Remove the base enclosure (see
5.
Disconnect the battery (see
a.
Fans (see
b.
Heatsink (see
Remove the speakers:
1.
Disconnect the right speaker cable (1).
2.
Lift the left speaker and the right speaker, and then remove them (2) .
Reverse this procedure to install the speakers.
52
Chapter 5 Removal and replacement procedures for authorized service provider parts
Make special note of each screw and screw lock size and location during removal
Base enclosure on page
Battery on page
Fans on page
48).
Heat sink for hybrid graphics memory on page
32).
34), and then remove the following components:
49).
Spare part number
858976-001
Advertisement
Table of Contents
