Husqvarna Rider 13C Workshop Manual page 28

Reparation instructions
5
Push the throttle control to full choke position. Pull
the wire's outer casing as far to the right as
possible and tighten the clamping screw. Pull back
the throttle control to the full throttle position and
check that the choke is no longer actuated.
Choke not actuated.
6
Fit the exhaust pipe and tighten the retaining
screws and clamps.
26
– English
7
Press the fuel line securely on the fuel pump and
fit the hose clamp.
8
Attach the engine's electrical connections.