Maintenance Schedule - Husqvarna Rider 13C Workshop Manual

Hide thumbs Also See for Rider 13C:
Table of Contents

Advertisement

The following is a list of the maintenance which should be conducted on the machine. Most of the points
that are not covered by this workshop manual are covered by the operator's manual.
Maintenance
Check the oil level in the engine
Check the engine's cooling air intake
Check the fuel pump's air filter
Check the steering wires
Check the brakes
Check the battery
Check the safety system
Check the screws and nuts
Check if there is any fuel or oil leakage
Clean around the silencer
Change the engine oil side-valve engine
Change the engine oil overhead-valve engine
Clean the air filter's pre-filter
Check the mower deck
Check the tyre pressures (60 kPa)
Lubricate the belt tensioner
Lubricate joints and axles
Adjust the brakes, Rider 11
Check the V-belts
Check the transmission's cooling fins,
Rider 13 C, Rider 15 C and Rider 16
Check the transmission's oil level,
Rider 13 C, Rider 15 C and Rider 16
Adjust the brakes, Rider 13 C, Rider 15 C and Rider 16
Check and adjust the throttle wire
Clean the cooling fins on the engine and transmission
Replace the air filter's pre-filter and paper filter
Replace the fuel filter
Replace the spark plug
1)
First change after 5 hours. Replace after every 25 hours with heavy loads and high temperatures.
be carried out more frequently in dusty conditions.
authorised service workshop.
= Described in this Workshop Manual.
= Not described in this Workshop Manual.
= Described in the Operating Instructions.
WARNING!
No service procedures must be conducted on the engine or cutting unit unless:
The engine is switched off.
The ignition key is removed.
The ignition cables are removed
from the plugs.

Maintenance schedule

1)
1)
2)
3)
3)
2)
3)
The machine should be lubricated twice a week if used daily.
Daily
maintenance
Page
before
starting
12
-
-
29
31
11
61
-
-
28
28
-
47
13
-
-
31
-
-
44
31
26
2,4)
-
-
-
8
The parking brake is applied.
The cutting unit is disengaged.
Delivery and dealer service
Maintenance interval in
hours
25
50
100
1)
1)
1)
2)
Cleaning and replacing should
4)
Carried out by
English –
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rider 11cRider 11Rider 15cRider 16

Table of Contents