Inbound Filter - D-Link DIR-825+ User Manual

Section 3 - Configuration
Click Inbound Filter on the navigation menu to configure the Inbound Filter. The Inbound
Filter allows you to place filtering rules on a per IP basis. Using this tool you may restrict
access to or block traffic to a specific remote IP address or range. When you are satisfied
with your configuration, click Save Settings.
ADD INBOUND FILTER RULE
Name: Enter a name for this Inbound Filter.
Allow or Deny traffic.
Action:
Remote IP Range
Enable:
Check the box to enable this rule.
Remote IP Start:
Enter the starting IP address to apply the rule to.
Remote IP End:
Enter the ending IP address to apply the rule to.
INBOUND FILTER RULES LIST
The currently defined Inbound Filter rules are listed here.
Click the Save Settings button when you are finished.
D-Link DIR-825+ User Manual

Inbound Filter

DIR-825+
INBOUND FILTER INBOUND FILTER
INBOUND FILTER
The Inbound Filter option is an advanced method of controlling data received from the Internet. With this feature you can configure
inbound data filtering rules that control data based on an IP address range.
Inbound Filters can be used for limiting access to a server on your network to a system or group of systems. Filter rules can be used
with Virtual Server, Port Forwarding, or Remote Administration features.
Save Settings Don't Save Settings
ADD INBOUND FILTER RULE
Name :
Action : Allow ▼
Remote IP Range : Enable Remote IP Start
☐
0.0.0.0
☐
0.0.0.0
☐
0.0.0.0
☐
0.0.0.0
☐
0.0.0.0
☐
0.0.0.0
☐
0.0.0.0
☐
0.0.0.0
Add
INBOUND FILTER RULES LIST
Name Action Remote IP Range
ADVANCED
Remote IP End
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
255.255.255.255
Cancel
95