D-Link DIR-825+ User Manual page 18

Section 2 - Installation
4. Use the included Ethernet cable to connect your modem to the yellow port labeled INTERNET on the router.
5. Turn on or plug your modem back in and wait approximately one minute before proceeding onward.
6. Connect the supplied power adapter to the router and a power outlet, press the power button, and verify that the power LED is lit. Allow
1 minute for the router to boot up.
D-Link DIR-825+ User Manual
Hardware Setup (continued)
DIR-825+
DIR-825+
DIR-825+
Modem
Modem
Modem
14