Protocol
Src. Addr./Mask
Src. Port
Dest. Addr./Mask
Dest. Port
Remove
Inbound Filter
The section allows you to create an inbound filter rule to change the
default all incoming IP traffic from the Internet configuration.
Add Inbound IP Filter
The following table describes the labels in this screen.
LABEL
Filter Name
Protocol
Show the protocol of active outbound IP filter rule.
Show the source address and mask of active outbound IP filter rule.
Show the source port of active outbound IP filter rule.
Show the destination address and mask of active outbound IP filter rule.
Show the destination port of active outbound IP filter rule.
Select the removed active outbound IP filter rule.
Enter an inbound IP filter rule name.
Select a protocol from the drop-down list.
33
DESCRIPTION