Table of Contents
Advertisement
Section 3 - Configuration
If you choose IPv6 over PPPoE as your Internet Connection, enter your IP address, configure the following settings:
SET USERNAME AND PASSWORD CONNECTION (PPPOE)
PPPoE Session :
Select whethe to Share with IPv4 or Create a new session.
If you choose Create a new session as the PPPoE Session, fill in the following fields:
Username:
Enter the username provided by your ISP.
Password:
Enter the password provided by your ISP.
Verify Password:
Enter the password provided by your ISP one more time.
Service Name:
Enter the ISP service name (optional).
Click Next to continue.
Click Connect to finish the setup.
D-Link DIR-825+ User Manual
IPv6 Internet Connection Setup Wizard
IPv6 over PPPoE
SETUP COMPLETE!
SET USERNAME AND PASSWORD CONNECTION (PPPOE)
To set up this connection you will need to have a Username and Password from your IPv6 Internet Service Provider. If
you do not have this information, please contact your ISP.
PPPoE Session : ž Share with IPv4 š Create a new session
User Name :
Password :
Verify Password :
Service Name :
Note: You may also need to provide a Service Name. If you do not have or know this information, please contact your ISP.
Prev
Next
Cancel
SETUP COMPLETE!
The IPv6 Internet Connection Setup Wizard has completed. Click the Connect button to save your settings and reboot
the router.
Prev
Next
Cancel
(optional)
Connect
Connect
67
Advertisement
Table of Contents
