Port Forwarding - D-Link DIR-825+ User Manual

Section 3 - Configuration
Click Port Forwarding on the navigation menu to configure Port Forwarding. Port
Forwarding allows you to expose devices, applications, and servers on your local network
to the Internet. When you are satisfied with your configuration, click Save Settings.
24 -- PORT FORWARDING RULES
Enable: Check the box to enable this rule.
Name: Enter a name for the application you wish to apply the virtual server
to. Use the Application Name dropdown menu and the << button
to quickly select an application. The name, TCP port, and UDP port
are automatically populated.
TCP:
Enter the TCP port number to forward.
Schedule: Select the schedule from the drop-down menu. The default is Always.
Refer to Schedules on page 119 for more information on creating
new schedules.
IP Address:
Enter the IP address of the computer on your local network that you
want to allow the incoming service to or use the Computer Name
drop-down menu and the << button to quickly insert a device's IP
address.
UDP:
Enter the UDP port number to forward.
Inbound Filter: You may set the traffic filter to Allow All or Block All traffic.
Click the Save Settings button when you are finished.
D-Link DIR-825+ User Manual

Port Forwarding

DIR-825+
PORT FORWARDING PORT FORWARDING
PORT FORWARDING
This option is used to open multiple ports or a range of ports in your router and redirect data through those ports to a single PC on
your network. This feature allows you to enter ports in the format, Port Ranges (100-150), Individual Ports (80, 68, 888), or Mixed
(1020-5000, 689). This option is only applicable to the INTERNET session.
Save Settings Don't Save Settings
24 -- PORT FORWARDING RULES
Remaining number of rules that can be created: 24
Ports to Open
Name TCP
Application Name
<< ▼
☐
IP Address UDP
Computer Name
<< ▼
Save Settings Don't Save Settings
ADVANCED
Schedule
Always ▼
Inbound Filter
Allow All
▼
90