Receiving A Shore To Ship Call; Resend Telephone Call Signal; Resend Telephone Call When; Receive Busy Signal - Standard Horizon SPECTRUM + GX2355S Owner's Manual

6.7.2

Receiving a Shore to Ship Call

After a DSC Telephone call from a shore station has been received the radio
will automatically be switched to the MariTel Marine operator channel.
HI USA
TELEPHONE
>END CALL
TELEPHONE
CALL FINISHED
ELPSD TIME
00 : 03 : 25
TELEPHONE
CALL FINISHED
ELPSD TIME
-- : -- : --
6.7.3

Resend Telephone Call Signal

When you send starting or ending telephone call signal to the coast station
and you receive no acknowledgment signal from coast station during 8
seconds or more, Resending menu will appear. You can resend the
telephone call with this menu.
NO REPLY
MIKE
>SEND
EXIT
2. Turn the Channel Selector knob to select SEND.
To exit the Telephone Call mode, turn the Channel Selector knob
to select EXIT and press the CALL/SET key.
6.7.4 Resend Telephone Call When Receive Busy Signal
When you send starting telephone call signal to the coast station and you
receive Busy signal from coast station, a menu will appear. You can
resend the telephone call with this menu.
UNATTENDED
MIKE
>SEND
EXIT
2. Turn the Channel Selector knob to select SEND.
To exit the telephone call, turn the Channel Selector knob to select
EXIT and press the CALL/SET key.
GX2355S
1. When the transceiver receives the telephone call
starting signal from the shore, the alarm will sound.
2. To take the incoming call, press the PTT and
start talking to the person.
3. To end the call, press the CALL/SET key.
4. When the transceiver has received the
telephone call ending signal, the transceiver is
switched to the previous channel and the
elapsed time will be shown as the illustration on
the left. If no elapsed time data is received "- - : -
- :- - " will be shown.
1. You receive no acknowledgment signal from
coast station, the dot-matrix area of the LCD will
A
be as shown in the illustration on the left.
1. You receive busy signal from coast station, the
dot-matrix area of the LCD will be as shown in
A
the illustration on the left.
Owner's Manual page 29