Sending A Group Call - Standard Horizon SPECTRUM + GX2355S Owner's Manual

UNATTENDED
BOB
>SEND
EXIT
11. To cancel, select EXIT using the Channel Selector knob and press
the CALL/SET key.
This procedure can be also canceled as follows;
Press the CALL/SET key or 16/9 key.

6.5 SENDING A GROUP CALL

This feature allows the user to contact a group of specific vessels using
DSC and to automatically switch to a desired channel. This feature allows
you to transmit a DSC signal with group MMSI that has been set according
to section 7.13 Group MMSI INPUT.
HI USA
CCG
>INDIVIDUAL
GROUP
ALL SHIPS
TELEPHONE
INDIVIDUAL
>GROUP
ALL SHIPS
TELEPHONE
GROUP
>SEND
EXIT
TX HI USA
WAITING
HI USA
CCG
page 26
10. When an individual call acknowledgment with
"unable to comply" is received, the established
channel is automatically selected.
A
1. Select the desired channel to use Group Call for
voice communications.
A
2. Press the CALL/SET key. The DSC CALLING
menu will appear.
A
3. Turn the Channel Selector knob to select GROUP.
To cancel, select EXIT with the Channel
Selector knob or press 16/9 key.
A
4. Press the CALL/SET key.
5. Turn the Channel Selector knob to select SEND.
To cancel, select EXIT with the Channel
A Selector knob or press 16/9 key.
6. Press the CALL/SET key.
When the Group Call signal is sent, the dot-
A
matrix area of the LCD will be as shown in the
illustration on the left.
7. After the GROUP CALL is transmitted, all the
radios in the group will switch to the designated
A channel.
Owner's Manual GX2355S